Jump to content

cant burn dl dvd.. please help

Cereal killer

Recommended Posts

Hi all.. I just became a registered member of this great/helpful site.. well i am trying to burn an image on to a dl dvd and i am having issues.. i have burned over 100 dvd and this is the first time i am having trouble.. so any help would be greatly appreciated.. here is the log

I 16:48:30 ImgBurn Version started!

I 16:48:30 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 16:48:30 Total Physical Memory: 3,143,736 KB - Available: 2,345,040 KB

W 16:48:30 Drive D:\ (FAT32) does not support single files > 4 GB in size.

I 16:48:30 Initialising SPTI...

I 16:48:30 Searching for SCSI / ATAPI devices...

I 16:48:30 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-4084N KQ09 (E:) (ATA)

I 16:48:30 Found 1 DVD±RW/RAM!

I 16:48:36 Operation Started!

I 16:48:36 Source File: G:\Duke.Nukem.Forever.XBOX360-COMPLEX\cpx-duke.dvd

I 16:48:36 Source File Sectors: 3,827,488 (MODE1/2048)

I 16:48:36 Source File Size: 7,838,695,424 bytes

I 16:48:36 Source File Volume Identifier: DVD_ROM

I 16:48:36 Source File Volume Set Identifier: d0a44000MS UDFBridge

I 16:48:36 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:48:36 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:48:36 Source File File System(s): ISO9660, UDF (1.50)

I 16:48:36 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4084N KQ09 (E:) (ATA)

I 16:48:37 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x)

I 16:48:37 Destination Media Sectors: 4,173,824

I 16:48:37 Write Mode: DVD

I 16:48:37 Write Type: DAO

I 16:48:37 Write Speed: 2.4x

I 16:48:37 Link Size: Auto

I 16:48:37 Lock Volume: Yes

I 16:48:37 Test Mode: No

I 16:48:37 OPC: No

I 16:48:37 BURN-Proof: Enabled

I 16:48:37 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 16:48:37 Book Type Setting: N/A (Reason: Invalid Command Operation Code)

I 16:48:37 User Specified L0 Data Zone Capacity: 1,913,760

W 16:50:41 Set L0 Data Zone Capacity Failed! - Reason: Write Error

W 16:50:41 Retrying (1)...

W 16:50:42 Retry Failed - Reason: Invalid Field in Parameter List

W 16:50:42 Retrying (2)...

W 16:50:43 Retry Failed - Reason: Invalid Field in Parameter List

W 16:50:43 Retrying (3)...

E 16:50:45 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

E 16:50:48 Operation Failed! - Duration: 00:02:08

I 16:50:48 Average Write Rate: N/A - Maximum Write Rate: N/A



at the moment i am using probably the worst disc memorex dvd+rdl 8.5 dvd.. i use to use verbatim but got really expensive.. any help or suggestions would be great. thanks all

Link to comment
Share on other sites

If they work great, but as a side note I am surprised that your Memorex discs have the Ritek dye, since when I used Memorex +R DLs the dye was CMC-MAG. In any case, you are guaranteed better reliability in burning with Verbatim +R DLs as well as playback.


Since you already wasted one disc, you just have to try again. Just make sure you have the latest firmware version as recommended on that link I gave you. Chances are you might get a few successful burns but with non Verbatim DLs you WILL encounter a few bad discs out of the spindle. It has happened to me as well. I had 3 out of 25 TDK +R DLs wasted (they also had the Ritek dye).


For SL (single layered), perhaps you can go with cheaper media like Riteks (still try to avoid CMC-MAG), but for DLs really there is no substituting Verbatims for the foreseeable future.

Edited by Rincewind
Link to comment
Share on other sites

i much appreciate the replys.. yea i just went through 4 dvds so far.. haha the only reason i went to memorex or to cheaper dvds was what you said about 3 bad out of 25 of verbatims.. same happen to me with verbatims so i just got fed up with them. but yea i guess imma just go and order a spindell pack online... but funny enough the first 4 burns i did with the memorex worked like a charm..

Link to comment
Share on other sites

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.