Jump to content

L0 Error


-Chris-

Recommended Posts

I have been using IMGBurn for a couple of weeks now burning games but now a keep getting this error and there are no updates for my drive so a have ran out of options a have also looked at the support forums for IMGBurn. Heres the log a get:

 

 

I 17:29:32 Operation Started!

I 17:29:32 Source File: D:\JDownloader Stuff\BADCALLOFJUREZCARTEL.dvd

I 17:29:32 Source File Sectors: 3,827,488 (MODE1/2048)

I 17:29:32 Source File Size: 7,838,695,424 bytes

I 17:29:32 Source File Volume Identifier: DVD_ROM

I 17:29:32 Source File Volume Set Identifier: d0a44000MS UDFBridge

I 17:29:32 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 17:29:32 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 17:29:32 Source File File System(s): ISO9660, UDF (1.50)

I 17:29:32 Destination Device: [1:0:0] PIONEER DVD-RW DVRTD08RS 1.06 (E:) (ATA)

I 17:29:32 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x)

I 17:29:32 Destination Media Sectors: 4,173,824

I 17:29:32 Write Mode: DVD

I 17:29:32 Write Type: DAO

I 17:29:32 Write Speed: 2.4x

I 17:29:32 Link Size: Auto

I 17:29:32 Lock Volume: Yes

I 17:29:32 Test Mode: No

I 17:29:32 OPC: No

I 17:29:32 BURN-Proof: Enabled

I 17:29:32 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 17:29:32 Advanced Settings - Optimal Writing Speed: No

I 17:29:33 User Specified L0 Data Zone Capacity: 1,913,760

E 17:30:07 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

E 17:30:07 Operation Failed! - Duration: 00:00:34

I 17:30:07 Average Write Rate: N/A - Maximum Write Rate: N/A

 

 

Also it says it cant recover TOC

 

Here are some photos of the situation too:

http://imageshack.us/photo/my-images/687/imgburnerror.jpg/

http://imageshack.us/photo/my-images/838/imgburnerror1.jpg/

Link to comment
Share on other sites

I would still recommend following the suggestions in that guide. You can try burning another disc again this time at a faster rate rather than 2.4x, such as 4x. Again though if that fails, the suggestions in that guide is rather helpful.

Link to comment
Share on other sites

And that guide offers suggestions. I don't know why I need to spoon feed you what the guide says, but if you are having issues burning (and obviously you are), try those suggestions. See if you have the most current firmware version for your burner. I also probably assuming you are not running the latest version of Imgburn or latest service pack for windows, since you decided to not post a full log properly.

 

If those don't work, try getting the suggested discs, Verbatim +R DLs instead of using the MID you are using (RICOHJPN).. If that still doesn't work, then you have a drive that just can't actually burn DL media. Burning DL media is not exactly the same as burning SL media.

Edited by Rincewind
Link to comment
Share on other sites

OMG OMG OMG

 

E 17:30:07 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

 

It tries to start but you're using cheapo discs your drive obviously doesn't like and it just errors out.

 

Now go and read that thread again - only this time, read it properly. (please, OMG, thanks)

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.