Nesio Posted November 17, 2011 Share Posted November 17, 2011 Hello, I have recently updated to imgburn 2.5.6.0 now when i try to backup a dvd or Game i get a lot of miscompare errors the dvd movie does work tho but the game wouldn't at all don't have that log anymore couse it closed on me. i use xp and a NEC DVD_RW ND-4571A burner. i never had this before and don't know what it means. i googled it and some say ignore and some say i shouldn't. should i just switch of verify. i never had any problems with burning using image burn before i don't know what to do. hope somebody can help me here. Regards and thank you in advance. this is the log from a movie burn I 14:03:44 ImgBurn Version 2.5.6.0 started! I 14:03:44 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 14:03:44 Total Physical Memory: 3.078.576 KB - Available: 2.316.204 KB W 14:03:44 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 14:03:44 Initialising SPTI... I 14:03:44 Searching for SCSI / ATAPI devices... I 14:03:46 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S202J SB01 (H:) (ATA) I 14:03:46 -> Drive 2 - Info: _NEC DVD_RW ND-4571A 1-01 (V:) (ATA) I 14:03:46 -> Drive 3 - Info: YNSNUDQ GHQVOPYVSL 1.03 (M:) (SCSI) I 14:03:46 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM! I 14:19:13 Operation Started! I 14:19:13 Source File: I:\Film\7 Seconds NL[1]\7 Seconds NL_M\7 Seconds NL_M.MDS I 14:19:13 Source File Sectors: 2.286.096 (MODE1/2048) I 14:19:13 Source File Size: 4.681.924.608 bytes I 14:19:13 Source File Volume Identifier: 7_SECONDS I 14:19:13 Source File Volume Set Identifier: 4663FAB7________7_SECONDS I 14:19:13 Source File Application Identifier: ELBY CLONEDVD I 14:19:13 Source File Implementation Identifier: ELABORATE BYTES I 14:19:13 Source File File System(s): ISO9660; UDF (1.02) I 14:19:13 Destination Device: [1:0:0] _NEC DVD_RW ND-4571A 1-01 (V:) (ATA) I 14:19:13 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) I 14:19:13 Destination Media Supported Write Speeds: 2x; 4x; 6x; 8x; 12x; 16x I 14:19:13 Destination Media Sectors: 2.297.888 I 14:19:13 Write Mode: DVD I 14:19:13 Write Type: DAO I 14:19:13 Write Speed: 4x I 14:19:13 Link Size: Auto I 14:19:13 Lock Volume: Yes I 14:19:13 Test Mode: No I 14:19:13 OPC: No I 14:19:13 BURN-Proof: Enabled I 14:19:13 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 14:19:14 Filling Buffer... (40 MB) I 14:19:16 Writing LeadIn... I 14:19:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 2286095) I 14:19:56 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2286095) I 14:33:44 Synchronising Cache... I 14:34:04 Exporting Graph Data... I 14:34:04 Graph Data File: C:\Documents and Settings\IsNoGooD\Application Data\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-4571A_1-01_DONDERDAG-17-NOVEMBER-2011_14-19_MCC_03RG20_4x.ibg I 14:34:04 Export Successfully Completed! I 14:34:04 Operation Successfully Completed! - Duration: 00:14:51 I 14:34:04 Average Write Rate: 5.535 KB/s (4.0x) - Maximum Write Rate: 5.750 KB/s (4.2x) I 14:34:04 Cycling Tray before Verify... I 14:34:24 Device Ready! I 14:34:25 Operation Started! I 14:34:25 Source Device: [1:0:0] _NEC DVD_RW ND-4571A 1-01 (V:) (ATA) I 14:34:25 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) I 14:34:25 Source Media Supported Write Speeds: 2x; 4x; 6x; 8x; 12x; 16x I 14:34:25 Image File: I:\Film\7 Seconds NL[1]\7 Seconds NL_M\7 Seconds NL_M.MDS I 14:34:25 Image File Sectors: 2.286.096 (MODE1/2048) I 14:34:25 Image File Size: 4.681.924.608 bytes I 14:34:25 Image File Volume Identifier: 7_SECONDS I 14:34:25 Image File Volume Set Identifier: 4663FAB7________7_SECONDS I 14:34:25 Image File Application Identifier: ELBY CLONEDVD I 14:34:25 Image File Implementation Identifier: ELABORATE BYTES I 14:34:25 Image File File System(s): ISO9660; UDF (1.02) I 14:34:25 Read Speed (Data/Audio): MAX / MAX W 14:47:00 Session 1, Track 1 is smaller on the disc than it is in the image file. W 14:47:00 Disc's Track Sectors: 1 (TOC Sectors: 1) W 14:47:00 Image File's Track Sectors: 2286096 (TOC Sectors: 2286096) I 14:47:00 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2286095) I 14:47:00 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2286095) W 14:47:23 Miscompare at LBA: 16, Offset: 0 W 14:47:23 Device: 0x00 (Empty Sector!) W 14:47:23 Image File: 0x01 W 14:47:23 Total Errors in Sector: 792 I 14:47:23 Verifying Sectors... W 14:47:24 Miscompare at LBA: 17, Offset: 0 W 14:47:24 Device: 0x00 (Empty Sector!) W 14:47:24 Image File: 0xFF W 14:47:24 Total Errors in Sector: 7 I 14:47:24 Verifying Sectors... W 14:47:24 Miscompare at LBA: 18, Offset: 1 W 14:47:24 Device: 0x00 (Empty Sector!) W 14:47:24 Image File: 0x42 W 14:47:24 Total Errors in Sector: 6 I 14:47:24 Verifying Sectors... W 14:47:25 Miscompare at LBA: 19, Offset: 1 W 14:47:25 Device: 0x00 (Empty Sector!) W 14:47:25 Image File: 0x4E W 14:47:25 Total Errors in Sector: 6 I 14:47:25 Verifying Sectors... W 14:47:25 Miscompare at LBA: 20, Offset: 1 W 14:47:25 Device: 0x00 (Empty Sector!) W 14:47:25 Image File: 0x54 W 14:47:25 Total Errors in Sector: 6 I 14:47:30 Verifying Sectors... W 14:47:30 Miscompare at LBA: 32, Offset: 0 W 14:47:30 Device: 0x00 (Empty Sector!) W 14:47:30 Image File: 0x01 W 14:47:30 Total Errors in Sector: 138 I 14:47:30 Verifying Sectors... W 14:47:30 Miscompare at LBA: 33, Offset: 0 W 14:47:30 Device: 0x00 (Empty Sector!) W 14:47:30 Image File: 0x04 W 14:47:30 Total Errors in Sector: 74 I 14:47:30 Verifying Sectors... W 14:47:30 Miscompare at LBA: 34, Offset: 0 W 14:47:30 Device: 0x00 (Empty Sector!) W 14:47:30 Image File: 0x05 W 14:47:30 Total Errors in Sector: 40 I 14:47:30 Verifying Sectors... W 14:47:30 Miscompare at LBA: 35, Offset: 0 W 14:47:30 Device: 0x00 (Empty Sector!) W 14:47:30 Image File: 0x06 W 14:47:30 Total Errors in Sector: 91 I 14:47:30 Verifying Sectors... W 14:47:30 Miscompare at LBA: 36, Offset: 0 W 14:47:30 Device: 0x00 (Empty Sector!) W 14:47:30 Image File: 0x07 W 14:47:30 Total Errors in Sector: 9 I 14:47:30 Verifying Sectors... W 14:47:30 Miscompare at LBA: 37, Offset: 0 W 14:47:30 Device: 0x00 (Empty Sector!) W 14:47:30 Image File: 0x08 W 14:47:30 Total Errors in Sector: 7 I 14:47:30 Verifying Sectors... W 14:47:30 Miscompare at LBA: 48, Offset: 0 W 14:47:30 Device: 0x00 (Empty Sector!) W 14:47:30 Image File: 0x01 W 14:47:30 Total Errors in Sector: 138 I 14:47:30 Verifying Sectors... W 14:47:30 Miscompare at LBA: 49, Offset: 0 W 14:47:30 Device: 0x00 (Empty Sector!) W 14:47:30 Image File: 0x04 W 14:47:30 Total Errors in Sector: 74 I 14:47:30 Verifying Sectors... W 14:47:30 Miscompare at LBA: 50, Offset: 0 W 14:47:30 Device: 0x00 (Empty Sector!) W 14:47:30 Image File: 0x05 W 14:47:30 Total Errors in Sector: 40 I 14:47:30 Verifying Sectors... shorted out cause post was to long I 14:47:49 Verifying Sectors... W 14:47:49 Miscompare at LBA: 1236, Offset: 2, File: \VIDEO_TS\VTS_01_1.VOB W 14:47:49 Device: 0x00 (Empty Sector!) W 14:47:49 Image File: 0x01 W 14:47:49 Total Errors in Sector: 16 W 14:47:49 Arrrrgggh! Too Many 'Miscompare' Messages! W 14:47:49 'Miscompare' logging has been halted for now. I 14:47:49 Verifying Sectors... I 15:03:22 Exporting Graph Data... I 15:03:22 Graph Data File: C:\Documents and Settings\IsNoGooD\Application Data\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-4571A_1-01_DONDERDAG-17-NOVEMBER-2011_14-19_MCC_03RG20_4x.ibg I 15:03:22 Export Successfully Completed! I 15:03:22 Operation Successfully Completed! - Duration: 00:28:56 I 15:03:22 Average Verify Rate: 4.665 KB/s (3.4x) - Maximum Verify Rate: 6.251 KB/s (4.5x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 17, 2011 Share Posted November 17, 2011 It looks like your drive failed to burn the disc properly or failed to reinitialise the disc properly - I wouldn't ignore either of those issues. Notice that before you got the miscompare errors it said the disc layout didn't match. The layout mismatch is what then caused the miscompares - because the program is making up the data that doesn't appear to be on the disc. W 14:47:00 Session 1, Track 1 is smaller on the disc than it is in the image file. W 14:47:00 Disc's Track Sectors: 1 (TOC Sectors: 1) W 14:47:00 Image File's Track Sectors: 2286096 (TOC Sectors: 2286096) Try the 1.02 firmware update for your drive and try the other supported write speeds (start with 8x). 4x might not be the speed that produces the best quality burn. http://www.firmwarehq.com/NEC/ND-4571A/files.html It might be worth cleaning the drive with a cleaning disc too - it's getting on a bit now. Link to comment Share on other sites More sharing options...
Nesio Posted December 2, 2011 Author Share Posted December 2, 2011 (edited) Hello, Sorry for getting back at this topic this late, but was to busy to try these things out. I installed a new burner ihas and still maintained the same errors. then i noticed something on sptd drivers so i uninstalled deamon tools an then manually the sptd drivers that came with that program. then my ihas burner was fine but the nec still the same so i took that appart and cleaned the inside damn that was dirty i used rubbing alcohol and came of yellow (used to smoke behind pc) lol. reinstalled and burn now whent fine. funny thing it happend after update of imgburn as i burnt succesfull just before update. anyways the drivers where also a problemn after the update so that is cleared also. just my last burn trying to backup a x360 game still gave me errors and didn't work so will try to backup one of my other gamnes maybe the image was faulty. I 17:30:39 Destination Device: [1:0:0] ATAPI iHAS224 B GL0A (H:) (ATA) I 17:30:39 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 17:30:42 Writing LeadIn... W 17:30:57 Failed to Write Sectors 0 - 31 - Reason: No Additional Sense Information W 17:30:57 Retrying (1 of 20)... W 17:31:15 Retry Failed - Reason: No Additional Sense Information W 17:31:15 Retrying (2 of 20)... W 17:31:33 Retry Failed - Reason: No Additional Sense Information W 17:31:33 Retrying (3 of 20)... I 17:31:39 Writing LeadIn... and I 18:15:54 Closing Track... I 18:15:55 Finalising Disc... W 18:19:10 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 18:19:10 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out W 18:19:10 Retrying (1 of 3)... W 18:22:07 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 18:22:07 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 18:22:07 Retrying (2 of 3)... I 18:23:30 Exporting Graph Data... and I 18:23:30 Average Write Rate: 3.224 KB/s (2.3x) - Maximum Write Rate: 3.391 KB/s (2.4x) I 18:23:31 Cycling Tray before Verify... W 18:23:39 Waiting for device to become ready... I 18:37:01 Abort Request Acknowledged E 18:37:01 Device Not Ready - Reason: Medium Not Present - Tray Open E 18:37:01 Operation Aborted! then when it didn't became ready i cancelled and i tried it was reading disk for a while then it just said open tray but appeared to be empty. Thanks for the help sofar Edited December 2, 2011 by Nesio Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 2, 2011 Share Posted December 2, 2011 Please don't post sections of the log, we need all of it for a given session. Link to comment Share on other sites More sharing options...
Nesio Posted December 3, 2011 Author Share Posted December 3, 2011 Ok, sorry for the sessions. i posted sessions since last time i had a log that did'nt fit but these are a little bit shorter so here is a complete log. I 22:36:43 ImgBurn Version 2.5.6.0 started! I 22:36:43 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 22:36:43 Total Physical Memory: 3.078.576 KB - Available: 2.291.452 KB I 22:36:43 Initialising SPTI... I 22:36:43 Searching for SCSI / ATAPI devices... I 22:36:44 -> Drive 1 - Info: ATAPI iHAS224 B GL0A (H:) (ATA) I 22:36:44 -> Drive 2 - Info: _NEC DVD_RW ND-4571A 1-01 (V:) (ATA) I 22:36:44 Found 2 DVD±RW/RAMs! I 22:36:54 Operation Started! I 22:36:54 Source File: I:\Spellen\X360\The Elder Scrolls V_ Skyrim[1]\s-skydr.dvd I 22:36:54 Source File Sectors: 4.267.015 (MODE1/2048) I 22:36:54 Source File Size: 8.738.846.720 bytes I 22:36:54 Source File Volume Identifier: DVD_ROM I 22:36:54 Source File Volume Set Identifier: 90bd4000MS UDFBridge I 22:36:54 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 22:36:54 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 22:36:54 Source File File System(s): ISO9660; UDF (1.50) I 22:36:54 Destination Device: [1:0:0] ATAPI iHAS224 B GL0A (H:) (ATA) I 22:36:54 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 22:36:54 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8x I 22:36:54 Destination Media Sectors: 4.267.040 I 22:36:54 Write Mode: DVD I 22:36:54 Write Type: DAO I 22:36:54 Write Speed: 2,4x I 22:36:54 Link Size: Auto I 22:36:54 Lock Volume: Yes I 22:36:54 Test Mode: No I 22:36:54 OPC: No I 22:36:54 BURN-Proof: Enabled I 22:36:54 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x) I 22:36:54 Book Type Setting: DVD-ROM I 22:36:54 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 22:36:54 Optimal L0 Data Zone Capacity: 2.133.520 I 22:36:54 Optimal L0 Data Zone Method: Copied From Original Disc I 22:36:54 Set L0 Data Zone Capacity Succeeded! I 22:36:54 Filling Buffer... (40 MB) I 22:36:56 Writing LeadIn... W 22:37:11 Failed to Write Sectors 0 - 31 - Reason: No Additional Sense Information W 22:37:11 Retrying (1 of 20)... W 22:37:33 Retry Failed - Reason: No Additional Sense Information W 22:37:33 Retrying (2 of 20)... W 22:37:51 Retry Failed - Reason: No Additional Sense Information W 22:37:51 Retrying (3 of 20)... I 22:37:57 Writing LeadIn... I 22:37:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 22:37:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 22:37:57 Writing Layer 0... (LBA: 0 - 2133519) I 22:59:51 Writing Layer 1... (LBA: 2133520 - 4267014) I 23:22:03 Synchronising Cache... I 23:22:12 Closing Track... I 23:22:13 Finalising Disc... W 23:25:03 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 23:25:03 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out W 23:25:03 Retrying (1 of 3)... W 23:27:50 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 23:27:50 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 23:27:50 Retrying (2 of 3)... W 23:30:45 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 23:30:45 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 23:30:45 Retrying (3 of 3)... W 23:33:51 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out W 23:33:51 Retry Failed - Reason: Session Fixation Error Writing Lead Out E 23:35:02 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out I 23:35:02 Finalising Disc (Last Attempt!)... E 23:35:17 Finalise Disc Failed! - Reason: No Additional Sense Information E 23:35:17 Failed to Write Image! I 23:35:24 Exporting Graph Data... I 23:35:24 Graph Data File: C:\Documents and Settings\IsNoGooD\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS224_B_GL0A_VRIJDAG-2-DECEMBER-2011_22-36_MKM-003-00_2,4x.ibg I 23:35:24 Export Successfully Completed! E 23:35:24 Operation Failed! - Duration: 00:58:23 I 23:35:24 Average Write Rate: 3.226 KB/s (2.3x) - Maximum Write Rate: 3.439 KB/s (2.5x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 3, 2011 Share Posted December 3, 2011 It's never a good sign to get an error and your drive return 'No Additional Sense Information' as the error. What controller is your drive attached to? Right click the drive drop down selection box and click 'Family Tree'. Close the prompt and copy + paste that info from the log window. Please also post the filter driver info - use the feature in the Tools menu. You might find you get better burns at 4x with 'Force HyperTuning' enabled in the EEPROM settings. i.e. as per my findings in this post... http://forum.imgburn.com/index.php?showtopic=18871&view=findpost&p=136519 Look at 'Attempt 8'. Link to comment Share on other sites More sharing options...
Nesio Posted December 3, 2011 Author Share Posted December 3, 2011 It's never a good sign to get an error and your drive return 'No Additional Sense Information' as the error. What controller is your drive attached to? Right click the drive drop down selection box and click 'Family Tree'. Close the prompt and copy + paste that info from the log window. Please also post the filter driver info - use the feature in the Tools menu. You might find you get better burns at 4x with 'Force HyperTuning' enabled in the EEPROM settings. i.e. as per my findings in this post... http://forum.imgburn.com/index.php?showtopic=18871&view=findpost&p=136519 Look at 'Attempt 8'. Hello, here is FAmily tree I 15:07:37 Family Tree: I 15:07:37 -> ACPI Multiprocessor-pc I 15:07:37 -> Systeem dat voldoet aan Microsoft ACPI I 15:07:37 -> PCI-bus I 15:07:37 -> VIA Serial ATA Controller - 5337 (VEN_1106&DEV_5337 - VIA) I 15:07:37 -> VIA ATA Channel I 15:07:37 -> Cd-rom-station (ATAPI iHAS224 B GL0A) (0-0) Filter drive info =============================================== Filter Driver Load Order - ImgBurn v2.5.6.0 =============================================== Upper Device Filter: redbook Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: PxHelp20 Lower Class Filter: ElbyCDFL Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys File Version: 5.1.2600.5512 (xpsp.080413-2108) File Description: Redbook Audio Filter-stuurprogramma Product Name: Besturingssysteem Microsoft® Windows® Product Version: 5.1.2600.5512 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. Alle rechten voorbehouden. Filter Name: PxHelp20 File Name: C:\WINDOWS\System32\Drivers\PxHelp20.sys File Version: 3.00.93.0 [3.0.93.0] File Description: Px Engine Device Driver for Windows 2000/XP Product Name: PxHelp20 Product Version: [2.0.0.0] Company Name: Sonic Solutions Copyright: Copyright © Sonic Solutions Filter Name: ElbyCDFL File Name: C:\WINDOWS\System32\Drivers\ElbyCDFL.sys File Version: 5, 2, 1, 3 [5.2.1.3] File Description: ElbyCDIO Filter Driver Product Name: CloneCD Product Version: 5, 2, 1, 3 [5.2.1.3] Company Name: SlySoft, Inc. Copyright: Copyright © 2003 - 2006 SlySoft, Inc. Filter Name: imapi File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys File Version: 5.1.2600.5512 (xpsp.080413-2108) File Description: IMAPI Kernel Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.5512 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Also here's a log when i used opc at 4X. i cancelled after the error so i could still use it for another burn try is i thuoght the disk have not been burned yet. I 02:32:14 ImgBurn Version 2.5.6.0 started! I 02:32:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 02:32:14 Total Physical Memory: 3.078.576 KB - Available: 2.375.356 KB I 02:32:14 Initialising SPTI... I 02:32:14 Searching for SCSI / ATAPI devices... I 02:32:14 -> Drive 1 - Info: ATAPI iHAS224 B GL0A (H:) (ATA) I 02:32:14 -> Drive 2 - Info: _NEC DVD_RW ND-4571A 1-01 (V:) (ATA) I 02:32:14 Found 2 DVD±RW/RAMs! I 02:33:01 Operation Started! I 02:33:01 Source File: I:\Spellen\X360\The Elder Scrolls V_ Skyrim[1]\s-skydr.dvd I 02:33:01 Source File Sectors: 4.267.015 (MODE1/2048) I 02:33:01 Source File Size: 8.738.846.720 bytes I 02:33:01 Source File Volume Identifier: DVD_ROM I 02:33:01 Source File Volume Set Identifier: 90bd4000MS UDFBridge I 02:33:01 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 02:33:01 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 02:33:01 Source File File System(s): ISO9660; UDF (1.50) I 02:33:01 Destination Device: [1:0:0] ATAPI iHAS224 B GL0A (H:) (ATA) I 02:33:01 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 02:33:01 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8x I 02:33:01 Destination Media Sectors: 4.267.040 I 02:33:01 Write Mode: DVD I 02:33:01 Write Type: DAO I 02:33:01 Write Speed: 4x I 02:33:01 Link Size: Auto I 02:33:01 Lock Volume: Yes I 02:33:01 Test Mode: No I 02:33:01 OPC: Yes I 02:33:01 BURN-Proof: Enabled I 02:33:01 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 02:33:01 Book Type Setting: DVD-ROM I 02:33:01 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes W 02:33:16 Optimum Power Calibration Failed! - Reason: No Additional Sense Information E 02:33:38 Optimum Power Calibration Failed! - Reason: No Additional Sense Information E 02:33:38 Operation Failed! - Duration: 00:00:37 I 02:33:38 Average Write Rate: N/A - Maximum Write Rate: N/A Thanks in advance. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 3, 2011 Share Posted December 3, 2011 Can you get it off the via controller? Link to comment Share on other sites More sharing options...
Nesio Posted December 3, 2011 Author Share Posted December 3, 2011 Can you get it off the via controller? Not sure how its hooked up to sata. i have been googling and found some topics about changing bios settings sata/ide. is that what you mean? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 3, 2011 Share Posted December 3, 2011 Do you actually have a VIA controller on your motherboard or is the drive plugged into a PCI card that uses a VIA controller? Link to comment Share on other sites More sharing options...
mmalves Posted December 3, 2011 Share Posted December 3, 2011 If you really can't move the burner to another SATA controller, try installing this driver for the VIA SATA controller. Link to comment Share on other sites More sharing options...
Nesio Posted December 4, 2011 Author Share Posted December 4, 2011 (edited) Do you actually have a VIA controller on your motherboard or is the drive plugged into a PCI card that uses a VIA controller? I have both But the burner is hooked up to sata on motherboard but there is a via vt6421 hooked up in pci with raid disabled. I also have ide ports on the motherboard but i don't have adapter from sata to ide. i hear they catch fire or something. my motherboard is from biostar. Edited December 4, 2011 by Nesio Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 4, 2011 Share Posted December 4, 2011 Wow, 2 VIA controllers - that's just bad luck! If no drivers get your machine working correctly, get yourself a Silicon Image chipset (Sil3512) based PCI card and put the drive on that. Link to comment Share on other sites More sharing options...
Recommended Posts