Jump to content

burning bluray dual layer file


goose21

Recommended Posts

ok here is the problem and have searched and found nothing to solve it.

used any dvd ripper. this works great if file is under 25 G.

when burning a Dual layer disk (50 G) will not burn the file. will only one layer. Tired of making 14 dollar coasters.

Any suggestions would be greatly appreciated

Link to comment
Share on other sites

Can you post a log from such a burn?

 

 

Cynthia here is the log file from when i tried to do a dual layer disk

Not to sound stupid but when i use the help files on how to burn a blu ray disk the directions to me seem to leave out a few things. I was under the assumption that the directions were from start to finish(Disk to file then back to disk) and not in the middle (File to disk). I can get the file to the hard drive. When i make a file it makes a iso file and the stuff described in the procedure to burn a blu ray don't even show up( no bdsm file or any of the files that were posted to the help file. so far the biggest problem is dual layer. I did a disk under 25 gig and it came out beautiful> tahnk you for your patience.

D

 

//****************************************\\

; ImgBurn Version 2.5.6.0 - Log

; Thursday, 20 October 2011, 18:04:16

; \\****************************************//

;

;

I 17:19:00 ImgBurn Version 2.5.6.0 started!

I 17:19:00 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 17:19:00 Total Physical Memory: 2,096,172 KB - Available: 1,300,448 KB

W 17:19:00 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 17:19:00 Initialising SPTI...

I 17:19:00 Searching for SCSI / ATAPI devices...

I 17:19:00 -> Drive 1 - Info: ATAPI iHBS212 2 5L03 (D:) (ATA)

I 17:19:00 Found 1 BD-RE!

I 17:19:20 Operation Started!

I 17:19:20 Source File: C:\Documents and Settings\Damian\My Documents\GULLIVERS_TRAVELS.dvd

I 17:19:20 Source File Sectors: 16,188,512 (MODE1/2048)

I 17:19:20 Source File Size: 33,154,072,576 bytes

I 17:19:20 Source File Volume Identifier: GULLIVERS_TRAVELS

I 17:19:20 Source File Volume Set Identifier: 8CD8E0EE8CB83F09_VOLUME_SET_ID

I 17:19:20 Source File Application Identifier: APPLICATION_ID

I 17:19:20 Source File Implementation Identifier: IMPLEMENTATION_ID

I 17:19:20 Source File File System(s): UDF (2.50)

I 17:19:20 Destination Device: [2:0:0] ATAPI iHBS212 2 5L03 (D:) (ATA)

I 17:19:20 Destination Media Type: BD-R (Disc ID: MEI-T02-001)

I 17:19:20 Destination Media Supported Write Speeds: 4x

I 17:19:20 Destination Media Sectors: 24,438,784

I 17:19:20 Write Mode: BD

I 17:19:20 Write Type: DAO

I 17:19:20 Write Speed: MAX

I 17:19:20 BD-R Verify Not Required: Yes

I 17:19:20 Link Size: Auto

I 17:19:20 Lock Volume: Yes

I 17:19:20 Test Mode: No

I 17:19:20 OPC: No

I 17:19:20 BURN-Proof: Enabled

I 17:19:22 Write Speed Successfully Set! - Effective: 17,980 KB/s (4x)

I 17:19:22 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 17:20:23 Filling Buffer... (40 MB)

I 17:20:25 Writing LeadIn...

I 17:20:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 16188511)

I 17:20:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 16188511)

I 17:20:27 Writing Layer 0... (LBA: 0 - 12219391)

W 17:37:52 Waiting for buffers to recover... (LBA: 9009984)

W 17:38:02 Waiting for hard disk activity to reach threshold level...

I 17:38:03 Writing Sectors...

I 17:44:19 Writing Layer 1... (LBA: 12219392 - 16188511)

I 17:51:56 Synchronising Cache...

I 17:52:00 Closing Track...

I 17:52:01 Finalising Disc...

I 17:52:19 Exporting Graph Data...

I 17:52:19 Graph Data File: C:\Documents and Settings\Damian\Application Data\ImgBurn\Graph Data Files\ATAPI_iHBS212_2_5L03_THURSDAY-OCTOBER-20-2011_5-19_PM_MEI-T02-001_MAX.ibg

I 17:52:19 Export Successfully Completed!

I 17:52:19 Operation Successfully Completed! - Duration: 00:32:58

I 17:52:19 Average Write Rate: 17,148 KB/s (3.8x) - Maximum Write Rate: 18,293 KB/s (4.1x)

I 17:52:19 Cycling Tray before Verify...

W 17:52:26 Waiting for device to become ready...

I 17:52:45 Device Ready!

I 17:52:49 Operation Started!

I 17:52:49 Source Device: [2:0:0] ATAPI iHBS212 2 5L03 (D:) (ATA)

I 17:52:49 Source Media Type: BD-R (Disc ID: MEI-T02-001)

I 17:52:49 Source Media Supported Write Speeds: 4x

I 17:52:49 Image File: C:\Documents and Settings\Damian\My Documents\GULLIVERS_TRAVELS.dvd

I 17:52:49 Image File Sectors: 16,188,512 (MODE1/2048)

I 17:52:49 Image File Size: 33,154,072,576 bytes

I 17:52:49 Image File Volume Identifier: GULLIVERS_TRAVELS

I 17:52:49 Image File Volume Set Identifier: 8CD8E0EE8CB83F09_VOLUME_SET_ID

I 17:52:49 Image File Application Identifier: APPLICATION_ID

I 17:52:49 Image File Implementation Identifier: IMPLEMENTATION_ID

I 17:52:49 Image File File System(s): UDF (2.50)

I 17:52:49 Read Speed (Data/Audio): MAX / MAX

I 17:52:50 Verifying Session 1 of 1... (1 Track, LBA: 0 - 16188511)

I 17:52:50 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 16188511)

I 17:52:50 Verifying Layer 0... (LBA: 0 - 12219391)

W 18:01:46 Failed to Read Sector 5287073 - Reason: L-EC Uncorrectable Error

W 18:01:46 Sector 5287073 maps to File: \BDMV\STREAM\00800.m2ts

W 18:02:02 Retrying (1)...

W 18:02:11 Miscompare at LBA: 5287072, Offset: 0, File: \BDMV\STREAM\00800.m2ts

W 18:02:11 Device: 0x30

W 18:02:11 Image File: 0x08

W 18:02:11 Total Errors in Sector: 2,034

I 18:02:11 Verifying Sectors...

W 18:02:18 Retry Failed - Reason: L-EC Uncorrectable Error

W 18:03:01 Failed to Read Sector 5287073 - Reason: L-EC Uncorrectable Error

W 18:03:01 Sector 5287073 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:07 Failed to Read Sector 5287074 - Reason: L-EC Uncorrectable Error

W 18:03:07 Sector 5287074 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:09 Failed to Read Sector 5287074 - Reason: L-EC Uncorrectable Error

W 18:03:09 Sector 5287074 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:16 Failed to Read Sector 5287075 - Reason: L-EC Uncorrectable Error

W 18:03:16 Sector 5287075 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:18 Failed to Read Sector 5287075 - Reason: L-EC Uncorrectable Error

W 18:03:18 Sector 5287075 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:24 Failed to Read Sector 5287076 - Reason: L-EC Uncorrectable Error

W 18:03:24 Sector 5287076 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:30 Failed to Read Sector 5287076 - Reason: L-EC Uncorrectable Error

W 18:03:30 Sector 5287076 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:37 Failed to Read Sector 5287077 - Reason: L-EC Uncorrectable Error

W 18:03:37 Sector 5287077 maps to File: \BDMV\STREAM\00800.m2ts

E 18:03:57 Failed to Read Sector 5287077 - Reason: L-EC Uncorrectable Error

E 18:03:57 Sector 5287077 maps to File: \BDMV\STREAM\00800.m2ts

E 18:03:57 Failed to Verify Sectors!

I 18:03:58 Exporting Graph Data...

I 18:03:58 Graph Data File: C:\Documents and Settings\Damian\Application Data\ImgBurn\Graph Data Files\ATAPI_iHBS212_2_5L03_THURSDAY-OCTOBER-20-2011_5-19_PM_MEI-T02-001_MAX.ibg

I 18:03:58 Export Successfully Completed!

E 18:03:58 Operation Failed! - Duration: 00:11:07

I 18:03:58 Average Verify Rate: 15,877 KB/s (3.5x) - Maximum Verify Rate: 26,676 KB/s (5.9x)

I 18:04:16 Close Request Acknowledged

I 18:04:16 Closing Down...

I 18:04:16 Shutting down SPTI...

I 18:04:16 ImgBurn closed!

;

Link to comment
Share on other sites

  • 1 year later...

I know this topic is really old but just in case anyone comes across this in the future. I had a similar drive (iHBS112 2) that was actually rebranded as an asus drive (BW-12B1ST). It would not burn DL discs with the one and only asus firmware available. I flashed it as the iHBS112 2 with the latest firmware at the time (PL06) and was able to burn a DL with imgburn but it fails verification. I tried again with Cyberlink Power2go 8 and it worked fine, no problems. I'm not sure where the problem lies but for some reason it wouldnt burn in imgburn.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.