Jump to content

some problem of threshold


maxim's

Recommended Posts

Hi all,i'm a french user of imgburn who's experencing some threshold problems.Here are my system's components:

-proc: AMD athlon 64 2.40 Ghz

-motherchip: ASROCK Alive NF7g-hd ready

-2Go of ram (kingston 1066 Mhz)

-Hard disk: Maxtor STM3160211 (7200 tr/min, 160Go)

 

While i'm burning my iso files, imgburn is the only software working.

Here's a log:

 

I 21:32:11 ImgBurn Version 2.5.6.0 started!

I 21:32:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 21:32:11 Total Physical Memory: 2 358 512 KB - Available: 1 750 580 KB

I 21:32:11 Initialising SPTI...

I 21:32:11 Searching for SCSI / ATAPI devices...

I 21:32:11 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.02-07 (D:) (ATA)

I 21:32:11 -> Drive 2 - Info: ATAPI iHAS224 B GL0A (E:) (ATA)

I 21:32:11 Found 2 DVD±RW/RAMs!

I 21:35:44 Operation Started!

I 21:35:44 Source File: C:\Documents and Settings\maxime\Mes documents\x.dvd

I 21:35:44 Source File Sectors: 3 827 488 (MODE1/2048)

I 21:35:44 Source File Size: 7 838 695 424 bytes

I 21:35:44 Source File Volume Identifier: DVD_ROM

I 21:35:44 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 21:35:44 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 21:35:44 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 21:35:44 Source File File System(s): ISO9660; UDF (1.50)

I 21:35:44 Destination Device: [2:0:0] ATAPI iHAS224 B GL0A (E:) (ATA)

I 21:35:44 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 21:35:44 Destination Media Supported Write Speeds: 4x; 6x; 8x

I 21:35:44 Destination Media Sectors: 4 173 824

I 21:35:44 Write Mode: DVD

I 21:35:44 Write Type: DAO

I 21:35:44 Write Speed: 4x

I 21:35:44 Link Size: Auto

I 21:35:44 Lock Volume: Yes

I 21:35:44 Test Mode: No

I 21:35:44 OPC: No

I 21:35:44 BURN-Proof: Enabled

I 21:35:44 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x)

I 21:35:44 Book Type Setting: DVD-ROM

I 21:35:44 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 21:35:44 User Specified L0 Data Zone Capacity: 1 913 760

I 21:36:24 Set L0 Data Zone Capacity Succeeded!

I 21:36:33 Filling Buffer... (20 MB)

I 21:36:34 Writing LeadIn...

I 21:36:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 21:36:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 21:36:35 Writing Layer 0... (LBA: 0 - 1913759)

I 21:48:28 Writing Layer 1... (LBA: 1913760 - 3827487)

W 21:51:25 Waiting for buffers to recover... (LBA: 2371744)

W 21:51:34 Waiting for hard disk activity to reach threshold level...

I 21:51:41 Writing Sectors...

W 21:52:24 Waiting for buffers to recover... (LBA: 2460096)

W 21:52:30 Waiting for hard disk activity to reach threshold level...

I 21:52:32 Writing Sectors...

W 21:52:57 Waiting for buffers to recover... (LBA: 2512064)

W 21:53:02 Waiting for hard disk activity to reach threshold level...

I 21:53:16 Writing Sectors...

W 21:54:01 Waiting for buffers to recover... (LBA: 2607200)

W 21:54:07 Waiting for hard disk activity to reach threshold level...

I 21:54:21 Writing Sectors...

W 21:54:41 Waiting for buffers to recover... (LBA: 2649536)

W 21:54:47 Waiting for hard disk activity to reach threshold level...

I 21:54:53 Writing Sectors...

W 21:55:13 Waiting for buffers to recover... (LBA: 2691136)

W 21:55:20 Waiting for hard disk activity to reach threshold level...

I 21:55:27 Writing Sectors...

W 21:55:49 Waiting for buffers to recover... (LBA: 2736768)

W 21:55:57 Waiting for hard disk activity to reach threshold level...

I 21:56:05 Writing Sectors...

I 22:02:55 Synchronising Cache...

I 22:03:02 Closing Track...

I 22:03:03 Finalising Disc...

I 22:03:36 Export Successfully Completed!

I 22:03:36 Operation Successfully Completed! - Duration: 00:27:52

I 22:03:36 Average Write Rate: 4 844 KB/s (3.5x) - Maximum Write Rate: 5 645 KB/s (4.1x)

I 22:03:36 Cycling Tray before Verify...

W 22:03:43 Waiting for device to become ready...

I 22:03:58 Device Ready!

I 22:03:58 Operation Started!

I 22:03:58 Source Device: [2:0:0] ATAPI iHAS224 B GL0A (E:) (ATA)

I 22:03:58 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)

I 22:03:58 Source Media Supported Write Speeds: 4x; 6x; 8x

I 22:03:58 Image File: C:\Documents and Settings\maxime\Mes documents\x.dvd

I 22:03:58 Image File Sectors: 3 827 488 (MODE1/2048)

I 22:03:58 Image File Size: 7 838 695 424 bytes

I 22:03:58 Image File Volume Identifier: DVD_ROM

I 22:03:58 Image File Volume Set Identifier: ec67c000MS UDFBridge

I 22:03:58 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 22:03:58 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 22:03:58 Image File File System(s): ISO9660; UDF (1.50)

I 22:03:58 Read Speed (Data/Audio): MAX / MAX

I 22:03:59 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 22:03:59 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 22:03:59 Verifying Layer 0... (LBA: 0 - 1913759)

I 22:09:42 Verifying Layer 1... (LBA: 1913760 - 3827487)

I 22:15:24 Operation Successfully Completed! - Duration: 00:11:24

I 22:15:24 Average Verify Rate: 11 207 KB/s (8.1x) - Maximum Verify Rate: 16 114 KB/s (11.6x)

I 23:08:31 Close Request Acknowledged

I 23:08:31 Closing Down...

I 23:08:32 Shutting down SPTI...

I 23:08:32 ImgBurn closed!

 

I hope someone will help me.

regards,

 

Maxime

Link to comment
Share on other sites

After using enditall (I tried to "kill" as many applications as i could, following instructions found on the web) here's a new log of my burn (the disc is still not recognized by my xbox360, played as a dvd media) for the same file:

 

I 13:18:03 ImgBurn Version 2.5.6.0 started!

I 13:18:04 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 13:18:04 Total Physical Memory: 2 358 512 KB - Available: 2 004 580 KB (That's better!)

I 13:18:04 Initialising SPTI...

I 13:18:04 Searching for SCSI / ATAPI devices...

I 13:18:04 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.02-07 (D:) (ATA)

I 13:18:04 -> Drive 2 - Info: ATAPI iHAS224 B GL0A (E:) (ATA)

I 13:18:04 Found 2 DVD±RW/RAMs!

I 13:19:10 Operation Started!

I 13:19:10 Source File: C:\Documents and Settings\maxime\x.dvd

I 13:19:10 Source File Sectors: 3 827 488 (MODE1/2048)

I 13:19:10 Source File Size: 7 838 695 424 bytes

I 13:19:10 Source File Volume Identifier: DVD_ROM

I 13:19:10 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 13:19:10 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 13:19:10 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 13:19:10 Source File File System(s): ISO9660; UDF (1.50)

I 13:19:10 Destination Device: [2:0:0] ATAPI iHAS224 B GL0A (E:) (ATA)

I 13:19:11 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 13:19:11 Destination Media Supported Write Speeds: 4x; 6x; 8x

I 13:19:11 Destination Media Sectors: 4 173 824

I 13:19:11 Write Mode: DVD

I 13:19:11 Write Type: DAO

I 13:19:11 Write Speed: 4x

I 13:19:11 Link Size: Auto

I 13:19:11 Lock Volume: Yes

I 13:19:11 Test Mode: No

I 13:19:11 OPC: No

I 13:19:11 BURN-Proof: Enabled

I 13:19:11 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x)

I 13:19:11 Book Type Setting: DVD-ROM

I 13:19:11 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 13:19:11 User Specified L0 Data Zone Capacity: 1 913 760

I 13:19:53 Set L0 Data Zone Capacity Succeeded!

I 13:19:55 Filling Buffer... (20 MB)

I 13:19:55 Writing LeadIn...

I 13:19:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 13:19:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 13:19:57 Writing Layer 0... (LBA: 0 - 1913759)

I 13:31:51 Writing Layer 1... (LBA: 1913760 - 3827487)

I 13:43:50 Synchronising Cache...

I 13:43:56 Closing Track...

I 13:43:57 Finalising Disc...

I 13:44:31 Exporting Graph Data...

I 13:44:31 Graph Data File: C:\Documents and Settings\maxime\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS224_B_GL0A_SAMEDI-21-JANVIER-2012_13-19_MKM-003-00_4x.ibg

I 13:44:31 Export Successfully Completed!

I 13:44:31 Operation Successfully Completed! - Duration: 00:25:20

I 13:44:31 Average Write Rate: 5 345 KB/s (3.9x) - Maximum Write Rate: 5 645 KB/s (4.1x)

I 13:44:31 Cycling Tray before Verify...

W 13:44:38 Waiting for device to become ready...

I 13:44:52 Device Ready!

I 13:44:52 Operation Started!

I 13:44:52 Source Device: [2:0:0] ATAPI iHAS224 B GL0A (E:) (ATA)

I 13:44:52 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)

I 13:44:52 Source Media Supported Write Speeds: 4x; 6x; 8x

I 13:44:52 Image File: C:\Documents and Settings\maxime\x.dvd

I 13:44:52 Image File Sectors: 3 827 488 (MODE1/2048)

I 13:44:52 Image File Size: 7 838 695 424 bytes

I 13:44:52 Image File Volume Identifier: DVD_ROM

I 13:44:52 Image File Volume Set Identifier: ec67c000MS UDFBridge

I 13:44:52 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 13:44:52 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 13:44:52 Image File File System(s): ISO9660; UDF (1.50)

I 13:44:52 Read Speed (Data/Audio): MAX / MAX

I 13:44:54 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 13:44:54 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 13:44:54 Verifying Layer 0... (LBA: 0 - 1913759)

I 13:50:36 Verifying Layer 1... (LBA: 1913760 - 3827487)

I 13:56:18 Exporting Graph Data...

I 13:56:18 Graph Data File: C:\Documents and Settings\maxime\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS224_B_GL0A_SAMEDI-21-JANVIER-2012_13-19_MKM-003-00_4x.ibg

I 13:56:18 Export Successfully Completed!

I 13:56:18 Operation Successfully Completed! - Duration: 00:11:24

I 13:56:18 Average Verify Rate: 11 207 KB/s (8.1x) - Maximum Verify Rate: 16 147 KB/s (11.7x)

 

"Filling buffer" and "writing lead in" took place in the same second , that's a good point. But I still have a "Waiting for device to become ready..." message.

Anyway i'm starting to think my console is also responsible for those failures, i guess "I'm a :pirate: and a bad one at that.", as you said.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.