Jump to content

Power Calibration Error


Kieranearth

Recommended Posts

I get the Power Calibration Error when trying to burn to DL Disks, I have updated to the latest firmware and searched for a fix for this and have read this http://forum.imgburn.com/index.php?showtopic=8000. I want to try and get it too burn with the disks I have rather than wasting money on Verbatim when Therese disks have worked for me before I have also tried burning on different speeds with no avail.

 

Here is my Log.

 

 

I 14:16:21 ImgBurn Version 2.5.7.0 started!

I 14:16:21 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)

I 14:16:21 Total Physical Memory: 1,572,216 KB - Available: 377,632 KB

W 14:16:21 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 14:16:21 Initialising SPTI...

I 14:16:21 Searching for SCSI / ATAPI devices...

I 14:16:22 -> Drive 1 - Info: HP DVD Writer 630c CH01 (E:) (ATA)

I 14:16:25 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S223B SB03 (D:) (ATA)

I 14:16:25 -> Drive 3 - Info: ANW QFKTEFO5QZ 3.5Z (F:) (SCSI)

I 14:16:25 Found 1 DVD±RW, 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

W 14:17:11 User accepted disc space warning and is attempting to truncate!

I 14:17:11 Operation Started!

I 14:17:11 Source File: C:\Users\Kieran\Desktop\complex-nfstherun.dvd

I 14:17:11 Source File Sectors: 4,267,015 (MODE1/2048)

I 14:17:11 Source File Size: 8,738,846,720 bytes

I 14:17:11 Source File Volume Identifier: DVD_ROM

I 14:17:11 Source File Volume Set Identifier: df7ac000MS UDFBridge

I 14:17:11 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 14:17:12 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 14:17:12 Source File File System(s): ISO9660, UDF (1.50)

I 14:17:12 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S223B SB03 (D:) (ATA)

I 14:17:12 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)

I 14:17:12 Destination Media Supported Write Speeds: 4x, 6x, 8x

I 14:17:12 Destination Media Sectors: 4,173,824

I 14:17:12 Write Mode: DVD

I 14:17:12 Write Type: DAO

I 14:17:12 Write Speed: 2x

I 14:17:12 DVD+R DL Reserve Track: No

I 14:17:12 Link Size: Auto

I 14:17:12 Lock Volume: Yes

I 14:17:12 Test Mode: No

I 14:17:12 OPC: No

I 14:17:12 BURN-Proof: Enabled

W 14:17:12 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x)

W 14:17:12 The drive only supports writing these discs at 4x, 6x, 8x.

I 14:17:12 Book Type Setting: DVD-ROM

W 14:17:12 Optimal layer break position exceeds L0 capacity.

W 14:17:12 Optimal L0 Sectors: 2,133,520

W 14:17:12 Maximum L0 Sectors: 2,086,912

I 14:17:12 Optimal L0 Data Zone Capacity: 2,133,520

I 14:17:12 Optimal L0 Data Zone Method: Copied From Original Disc

W 14:17:12 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

I 14:17:14 Filling Buffer... (40 MB)

I 14:17:15 Writing LeadIn...

W 14:17:15 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error

W 14:17:15 Retrying (1 of 20)...

W 14:17:15 Retry Failed - Reason: Power Calibration Area Error

W 14:17:15 Retrying (2 of 20)...

W 14:17:15 Retry Failed - Reason: Power Calibration Area Error

W 14:17:15 Retrying (3 of 20)...

W 14:17:15 Retry Failed - Reason: Power Calibration Area Error

W 14:17:15 Retrying (4 of 20)...

W 14:17:15 Retry Failed - Reason: Power Calibration Area Error

W 14:17:15 Retrying (5 of 20)...

W 14:17:16 Retry Failed - Reason: Power Calibration Area Error

W 14:17:16 Retrying (6 of 20)...

W 14:17:16 Retry Failed - Reason: Power Calibration Area Error

W 14:17:16 Retrying (7 of 20)...

W 14:17:16 Retry Failed - Reason: Power Calibration Area Error

W 14:17:16 Retrying (8 of 20)...

W 14:17:16 Retry Failed - Reason: Power Calibration Area Error

W 14:17:16 Retrying (9 of 20)...

W 14:17:16 Retry Failed - Reason: Power Calibration Area Error

W 14:17:16 Retrying (10 of 20)...

W 14:17:16 Retry Failed - Reason: Power Calibration Area Error

W 14:17:16 Retrying (11 of 20)...

W 14:17:16 Retry Failed - Reason: Power Calibration Area Error

W 14:17:16 Retrying (12 of 20)...

W 14:17:17 Retry Failed - Reason: Power Calibration Area Error

W 14:17:17 Retrying (13 of 20)...

W 14:17:17 Retry Failed - Reason: Power Calibration Area Error

W 14:17:17 Retrying (14 of 20)...

W 14:17:17 Retry Failed - Reason: Power Calibration Area Error

W 14:17:17 Retrying (15 of 20)...

W 14:17:17 Retry Failed - Reason: Power Calibration Area Error

W 14:17:17 Retrying (16 of 20)...

W 14:17:17 Retry Failed - Reason: Power Calibration Area Error

W 14:17:17 Retrying (17 of 20)...

W 14:17:17 Retry Failed - Reason: Power Calibration Area Error

W 14:17:17 Retrying (18 of 20)...

W 14:17:17 Retry Failed - Reason: Power Calibration Area Error

W 14:17:17 Retrying (19 of 20)...

W 14:17:18 Retry Failed - Reason: Power Calibration Area Error

W 14:17:18 Retrying (20 of 20)...

W 14:17:18 Retry Failed - Reason: Power Calibration Area Error

W 14:17:20 Retrying (21)...

W 14:17:20 Retry Failed - Reason: Power Calibration Area Error

E 14:17:21 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error

I 14:17:21 Synchronising Cache...

W 14:17:24 User opted to skip the 'Close Track/Session/Disc' functions.

E 14:17:24 Failed to Write Image!

E 14:17:24 Operation Failed! - Duration: 00:00:12

I 14:17:24 Average Write Rate: N/A - Maximum Write Rate: N/A

Link to comment
Share on other sites

I 14:17:12 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)

W 14:17:12 The drive only supports writing these discs at 4x, 6x, 8x.

You can try burning at 6x or 8x to see if it works. Your only other option would be to get a new burner, which may or may not be able to burn those discs.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.