ravi Posted June 24, 2012 Share Posted June 24, 2012 Getting errors on closing track and finalizing disc. My drive is Asus DRW-24B3ST crossflashed with ixtreme max firmware. Here is my log. I 09:49:51 ImgBurn Version 2.5.7.0 started! I 09:49:51 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 09:49:51 Total Physical Memory: 4,176,172 KB - Available: 2,774,320 KB I 09:49:51 Initialising SPTI... I 09:49:51 Searching for SCSI / ATAPI devices... I 09:49:51 -> Drive 1 - Info: DTSOFT BDROM 1.05 (I:) (Virtual) I 09:49:51 -> Drive 2 - Info: ATAPI iHAS524 B AL2A (F:) (ATA) I 09:49:52 -> Drive 3 - Info: HL-DT-ST DVDRAM GH22NS50 TN02-01 (G:) (ATA) I 09:49:52 Found 2 DVD±RW/RAMs and 1 BD-ROM! I 10:03:25 Operation Started! I 10:03:25 Source File: C:\Users\Ravi.B.Patel\Desktop\imars-legobat2.360.dvd I 10:03:25 Source File Sectors: 4,267,015 (MODE1/2048) I 10:03:25 Source File Size: 8,738,846,720 bytes I 10:03:25 Source File Volume Identifier: DVD_ROM I 10:03:25 Source File Volume Set Identifier: 2afd0000MS UDFBridge I 10:03:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:03:25 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:03:25 Source File File System(s): ISO9660, UDF (1.50) I 10:03:25 Destination Device: [0:0:0] ATAPI iHAS524 B AL2A (F:) (ATA) I 10:03:25 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R12-00) I 10:03:25 Destination Media Supported Write Speeds: 4x, 6x, 8x I 10:03:25 Destination Media Sectors: 4,267,040 I 10:03:25 Write Mode: DVD I 10:03:25 Write Type: DAO I 10:03:25 Write Speed: 2.4x I 10:03:25 DVD+R DL Reserve Track: No I 10:03:25 Link Size: Auto I 10:03:25 Lock Volume: Yes I 10:03:25 Test Mode: No I 10:03:25 OPC: No I 10:03:25 BURN-Proof: Enabled W 10:03:25 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) W 10:03:25 The drive only supports writing these discs at 4x, 6x, 8x. I 10:03:25 Book Type Setting: DVD-ROM I 10:03:25 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 10:03:25 Optimal L0 Data Zone Capacity: 2,133,520 I 10:03:25 Optimal L0 Data Zone Method: Copied From Original Disc I 10:03:25 Set L0 Data Zone Capacity Succeeded! I 10:03:26 Filling Buffer... (80 MB) I 10:03:27 Writing LeadIn... I 10:04:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 10:04:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 10:04:25 Writing Layer 0... (LBA: 0 - 2133519) I 10:17:38 Writing Layer 1... (LBA: 2133520 - 4267014) I 10:30:58 Synchronising Cache... I 10:31:16 Closing Track... W 10:31:32 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 10:31:32 Close Track Failed! - Reason: Power Calibration Area Is Full W 10:31:32 Retrying (1 of 3)... W 10:31:48 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 10:31:48 Retry Failed - Reason: Power Calibration Area Is Full W 10:31:48 Retrying (2 of 3)... W 10:32:04 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 10:32:04 Retry Failed - Reason: Power Calibration Area Is Full W 10:32:04 Retrying (3 of 3)... W 10:32:20 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power Calibration Area Is Full W 10:32:20 Retry Failed - Reason: Power Calibration Area Is Full I 10:32:27 Finalising Disc... W 10:32:27 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 10:32:27 Retrying (1 of 3)... W 10:32:42 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 10:32:42 Retrying (2 of 3)... W 10:32:58 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 10:32:58 Retrying (3 of 3)... W 10:33:15 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 10:34:11 Retrying (4)... W 10:34:26 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session I 10:35:21 Exporting Graph Data... I 10:35:21 Graph Data File: C:\Users\Ravi.B.Patel\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS524_B_AL2A_SUNDAY-JUNE-24-2012_10-03_AM_MBIPG101-R12-00_2.4x.ibg I 10:35:21 Export Successfully Completed! I 10:35:21 Operation Successfully Completed! - Duration: 00:31:56 I 10:35:21 Average Write Rate: 5,357 KB/s (3.9x) - Maximum Write Rate: 5,652 KB/s (4.1x) I 10:35:21 Cycling Tray before Verify... W 10:35:29 Waiting for device to become ready... I 10:35:51 Device Ready! I 10:35:53 Operation Started! I 10:35:53 Source Device: [0:0:0] ATAPI iHAS524 B AL2A (F:) (ATA) I 10:35:53 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MBIPG101-R12-00) I 10:35:53 Source Media Supported Write Speeds: 4x, 6x, 8x I 10:35:53 Image File: C:\Users\Ravi.B.Patel\Desktop\imars-legobat2.360.dvd I 10:35:53 Image File Sectors: 4,267,015 (MODE1/2048) I 10:35:53 Image File Size: 8,738,846,720 bytes I 10:35:53 Image File Volume Identifier: DVD_ROM I 10:35:53 Image File Volume Set Identifier: 2afd0000MS UDFBridge I 10:35:53 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:35:53 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 10:35:53 Image File File System(s): ISO9660, UDF (1.50) I 10:35:53 Read Speed (Data/Audio): MAX / MAX I 10:35:54 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 10:35:54 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 10:35:54 Verifying Layer 0... (LBA: 0 - 2133519) W 10:42:07 Failed to Read Sectors 2112480 - 2112511 - Reason: L-EC Uncorrectable Error W 10:42:16 Failed to Read Sector 2112480 - Reason: L-EC Uncorrectable Error W 10:44:00 Retrying (1)... W 10:44:07 Retry Failed - Reason: L-EC Uncorrectable Error W 10:44:15 Failed to Read Sector 2112480 - Reason: L-EC Uncorrectable Error W 10:44:23 Failed to Read Sector 2112481 - Reason: L-EC Uncorrectable Error Getting following error on verification Link to comment Share on other sites More sharing options...
mmalves Posted June 24, 2012 Share Posted June 24, 2012 http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
ravi Posted June 24, 2012 Author Share Posted June 24, 2012 (edited) I'm using verbatiem media MBIPG101-R12-00 made in india.is it bad? Truncted method works with this media on other drive. Edited June 24, 2012 by ravi Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 24, 2012 Share Posted June 24, 2012 Yes, it's bad. You need to use the proper MKM-003-00 or MKM-001-00 Verbatim stuff. Link to comment Share on other sites More sharing options...
Recommended Posts