Jump to content

overburn errors on dl


makaveli801
 Share

Recommended Posts

Hello all I have burned many games on imgburn. Even using imgburn through wine. I have a file that exceeds the limit of my dual layer disk, I'm not using verbatim but I know my tdk disk work just fine. All my firmware is up to date. Wonder if you all can take a peak at my log and see what's going on what if anything I am doing wrong i will appreciate any help.

 

 

 

I 18:14:39 ImgBurn Version 2.5.5.0 started!

I 18:14:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 18:14:39 Total Physical Memory: 1,542,508 KB - Available: 1,264,552 KB

I 18:14:40 Initialising ASPI...

I 18:14:40 Searching for Auto Loader devices...

I 18:14:40 Found 0 Auto Loaders!

I 18:14:40 Searching for SCSI / ATAPI devices...

I 18:14:40 -> Drive 1 - Info: HL-DT-ST DVD-ROM GDR8163B 0D20

I 18:14:40 -> Drive 2 - Info: _NEC DVD_RW ND-3550A 1.07

I 18:14:40 Found 1 DVD-ROM and 1 DVD±RW!

I 18:15:50 Rebuilding SCSI / ATAPI device map...

I 18:15:50 Searching for Auto Loader devices...

I 18:15:50 Found 0 Auto Loaders!

I 18:15:50 Searching for SCSI / ATAPI devices...

I 18:15:50 -> Drive 1 - Info: HL-DT-ST DVD-ROM GDR8163B 0D20

I 18:15:50 -> Drive 2 - Info: _NEC DVD_RW ND-3550A 1.07

I 18:15:50 Found 1 DVD-ROM and 1 DVD±RW!

W 18:16:59 I/O Interface has been changed!

I 18:16:59 Shutting down ASPI...

I 18:16:59 Initialising ASAPI...

E 18:16:59 Unable to initialise ASAPI! - ASAPI.DLL

E 18:16:59 Reason: Module not found

E 18:16:59 You need to install an ASAPI manager.

E 18:16:59 Visit http://www.imgburn.com to download one.

E 18:16:59 Alternatively, try changing the 'I/O Interface' in the Settings to a different one.

W 18:17:26 I/O Interface has been changed!

I 18:17:26 Shutting down ASAPI...

I 18:17:26 Initialising SPTI...

I 18:17:26 Searching for Auto Loader devices...

I 18:17:26 Found 0 Auto Loaders!

I 18:17:26 Searching for SCSI / ATAPI devices...

I 18:17:26 -> Drive 1 - Info: HTC Android Phone 0100 (E:)

I 18:17:26 Found 1 Unknown!

W 18:19:39 I/O Interface has been changed!

I 18:19:40 Shutting down SPTI...

I 18:19:40 Initialising ASPI...

I 18:19:40 Searching for Auto Loader devices...

I 18:19:40 Found 0 Auto Loaders!

I 18:19:40 Searching for SCSI / ATAPI devices...

I 18:19:40 -> Drive 1 - Info: HL-DT-ST DVD-ROM GDR8163B 0D20

I 18:19:40 -> Drive 2 - Info: _NEC DVD_RW ND-3550A 1.07

I 18:19:40 Found 1 DVD-ROM and 1 DVD±RW!

I 18:22:25 Searching for Auto Loader devices...

I 18:22:25 Found 0 Auto Loaders!

I 18:22:25 Searching for SCSI / ATAPI devices...

I 18:22:25 -> Drive 1 - Info: HL-DT-ST DVD-ROM GDR8163B 0D20

I 18:22:25 -> Drive 2 - Info: _NEC DVD_RW ND-3550A 1.07

I 18:22:25 Found 1 DVD-ROM and 1 DVD±RW!

W 18:22:54 User accepted disc space warning and is attempting to overburn!

I 18:22:55 Operation Started!

I 18:22:55 Source File: Z:\media\FantomHD\XBOX 360 Games\MGS_Disc1_xEvilx_upload.dvd

I 18:22:55 Source File Sectors: 4,267,024 (MODE1/2048)

I 18:22:55 Source File Size: 8,738,865,152 bytes

I 18:22:55 Source File Volume Identifier: DVD_ROM

I 18:22:55 Source File Volume Set Identifier: 37594000MS UDFBridge

I 18:22:55 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 18:22:55 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 18:22:55 Source File File System(s): ISO9660, UDF (1.50)

I 18:22:55 Destination Device: [1:1:0] _NEC DVD_RW ND-3550A 1.07

I 18:22:55 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x)

I 18:22:55 Destination Media Sectors: 4,173,824

I 18:22:55 Write Mode: DVD

I 18:22:55 Write Type: DAO

I 18:22:55 Write Speed: 2x

I 18:22:55 Link Size: Auto

I 18:22:55 Lock Volume: Yes

I 18:22:55 Test Mode: No

I 18:22:55 OPC: Yes

I 18:22:55 BURN-Proof: Enabled

W 18:22:55 Write Speed Miscompare! - MODE SENSE: 8,467 KB/s (6.3x), GET PERFORMANCE: 5,540 KB/s (4x)

W 18:22:55 Write Speed Miscompare! - MODE SENSE: 8,467 KB/s (6.3x), GET PERFORMANCE: 5,540 KB/s (4x)

W 18:22:55 Write Speed Miscompare! - MODE SENSE: 8,467 KB/s (6.3x), GET PERFORMANCE: 5,540 KB/s (4x)

W 18:22:55 Write Speed Miscompare! - MODE SENSE: 8,467 KB/s (6.3x), GET PERFORMANCE: 5,540 KB/s (4x)

W 18:22:55 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 8,467 KB/s (6.3x) / 5,540 KB/s (4x)

I 18:22:55 Book Type Setting: DVD-ROM

W 18:24:57 Optimal layer break position exceeds L0 capacity.

W 18:24:57 Optimal L0 Sectors: 2,133,520

W 18:24:57 Maximum L0 Sectors: 2,086,912

I 18:24:57 Optimal L0 Data Zone Capacity: 2,133,520

I 18:24:57 Optimal L0 Data Zone Method: ECC Block Boundary

W 18:25:04 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

I 18:25:04 Filling Buffer... (20 MB)

I 18:25:05 Writing LeadIn...

I 18:25:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267023)

I 18:25:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267023)

I 18:25:08 Writing Layer 0... (LBA: 0 - 2086911)

I 18:37:48 Writing Layer 1... (LBA: 2086912 - 4267023)

W 18:51:03 Failed to Write Sectors 4173824 - 4173855 - Reason: Logical Block Address out of Range

W 18:51:03 Retrying (1 of 20)...

W 18:51:03 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:03 Retrying (2 of 20)...

W 18:51:03 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:03 Retrying (3 of 20)...

W 18:51:03 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:03 Retrying (4 of 20)...

W 18:51:03 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:03 Retrying (5 of 20)...

W 18:51:03 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:03 Retrying (6 of 20)...

W 18:51:03 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:03 Retrying (7 of 20)...

W 18:51:03 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:03 Retrying (8 of 20)...

W 18:51:03 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:03 Retrying (9 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (10 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (11 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (12 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (13 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (14 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (15 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (16 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (17 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (18 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (19 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:51:04 Retrying (20 of 20)...

W 18:51:04 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:38 Retrying (21)...

W 18:55:38 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:38 Retrying (22)...

W 18:55:38 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:39 Retrying (23)...

W 18:55:39 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:39 Retrying (24)...

W 18:55:39 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:39 Retrying (25)...

W 18:55:39 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:39 Retrying (26)...

W 18:55:39 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:40 Retrying (27)...

W 18:55:40 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:40 Retrying (28)...

W 18:55:40 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:40 Retrying (29)...

W 18:55:40 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:40 Retrying (30)...

W 18:55:40 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:40 Retrying (31)...

W 18:55:40 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:40 Retrying (32)...

W 18:55:40 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:41 Retrying (33)...

W 18:55:41 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:41 Retrying (34)...

W 18:55:41 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:41 Retrying (35)...

W 18:55:41 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:41 Retrying (36)...

W 18:55:41 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:41 Retrying (37)...

W 18:55:41 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:42 Retrying (38)...

W 18:55:42 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:42 Retrying (39)...

W 18:55:42 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:42 Retrying (40)...

W 18:55:42 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:42 Retrying (41)...

W 18:55:42 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:42 Retrying (42)...

W 18:55:42 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:42 Retrying (43)...

W 18:55:42 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:43 Retrying (44)...

W 18:55:43 Retry Failed - Reason: Logical Block Address out of Range

W 18:55:43 Retrying (45)...

W 18:55:43 Retry Failed - Reason: Logical Block Address out of Range

E 18:55:44 Failed to Write Sectors 4173824 - 4173855 - Reason: Logical Block Address out of Range

I 18:55:44 Synchronising Cache...

W 18:55:46 User opted to skip the 'Close Track/Session/Disc' functions.

E 18:55:46 Failed to Write Image!

I 18:55:47 Exporting Graph Data...

I 18:55:47 Graph Data File: C:\users\pat\Application Data\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-3550A_1.07_FRIDAY-AUGUST-17-2012_6-22_PM_RITEK-S04-66_2x.ibg

I 18:55:47 Export Successfully Completed!

E 18:55:47 Operation Failed! - Duration: 00:32:51

I 18:55:47 Average Write Rate: 4,549 KB/s (3.3x) - Maximum Write Rate: 5,984 KB/s (4.3x)

 

Link to comment
Share on other sites

If you don't have an iHASx24 burner with the appropriate firmware then you should truncate, not overburn, and even then the game might not work (you'll have to search online to find this out).

 

Also your drive supports the media you're using at 4x, 6x and 8x, so you might want to try burning at 6x or 8x if 4x isn't working anymore (you've selected 2x but since the burner doesn't support that media at that speed it automatically elects 4x as the burn speed).

 

//edit I knew I forgot something! :doh:

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.