kortik Posted October 28, 2006 Posted October 28, 2006 I could burn dvds just last 1hr. then I shut down my computer. come back to turn on and wanted to burn dvd? I put a blank divd hit imgburn it looks like it starts doing something then I/O error1 Device: [0:0:0] Plextor DVDR PX716A 1.10 (D:)(ATA) ScsiStatus: 0x2 Interpretation: Check condition CDB: 2A 00 00 00 00 20 00 00 20 00 Interpretation: Write (10) -Sectors: 32-63 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00 Interpretation: Ivalid Field in CDB thats what it shows I hit cancel and then it shows this: Finalize Disk Failed! Device: [0:0:0] Plextor DVDR PX716A 1.10 (D:)(ATA) Reason: Empty or Partially Written Reserved Track what also wierd is when I insert the balnk DVD+R in My Computer it says CD Drive: (D:) when I eject it and just close the drive w/out anything in there it recognizes it as DVD-RW Drive: (D:) I can play other burned DVDs and it shows fine using PowerDVD it just will not burn anymore do I have a media problem? I've used the same DVD+R before just 2-3 hours ago and it was fine. I've restared my comp still no good my media is Fujifilm DVD+R (plextools Proffesionla recognizes it as blank disk man. Id=PRODISK R05) Please help?
LIGHTNING UK! Posted October 28, 2006 Posted October 28, 2006 Sorry to have to tell you this but you need to ditch the Prodisc junk media and get yourself some decent Verbatim (with the MCC dye) or Taiyo Yuden media.
kortik Posted October 28, 2006 Author Posted October 28, 2006 so its just the media and thats it. whey does my drive say CD drive when I put the blank dvd+r in it. but when I take it out it shows as DVD-RW drvie. its just strage. plus I bought a 100pack and used abotu 10 of them w/out anyprobelms I dont know if I can return it now. what should I do
lfcrule1972 Posted October 28, 2006 Posted October 28, 2006 You need better media as the boss said. Sorry to hear you bought 100 of them but what you will see is maybe some ok burns but a lot of grief inbetween. If I were you I would contact the retailer and tell them that your drive refuses to recognise them and ask to return them. If the retailer sells Taiyo Yuden or MCC dye Verbatims get those instead.
LIGHTNING UK! Posted October 28, 2006 Posted October 28, 2006 Windows always changes the drive name to CD Drive when you put a blank in. It's because it's empty and it doesn't understand blanks very well. So basically ignore explorer and just trust your burning programs to do their job. Even though you've burnt a few of them ok, they're probably really bad burns. There's a very fine line between not working and working very badly. You're hovering right over it.
kortik Posted October 28, 2006 Author Posted October 28, 2006 thank you I'll go to Best Buy cause thats where I got mine. its true some burns work and some dont its wierd. cause 1 minute ago I burned one DVD w/out any probelms damn those DVD+Rs You know I alwasy bought Fujifilm and alwasy looked where they were made most of the time it said Made in Japan . PlextoolPro alwasy told me Taiyo Yuden disk. So this time I bought it again Fuji film but forgot to see where they were made it was Taiwan. and they are PRODISK R05 appareantly. so how can I tell in the store which media is ToyoYuden or MCC? should I just go for Vertbaitm brand always? I bought DVD+R DL from Verbatim and burnes were flawless. there were made in Singapour.
kevdriver Posted October 28, 2006 Posted October 28, 2006 kortik, Because of the up and down quality of most media, even the ones you may have had success with before, its best to stick with Verbatim or Taio Yuden. These two brands consistantly give good burns are arer of the highest quality dye formation.
kortik Posted October 28, 2006 Author Posted October 28, 2006 how can I tell if its Taoi Yuden Media. I can see Verbatim brand but never saw a Taoi Yuden brand media. last time I bought Taio Yuden disk were Fujifilm 100 pack DVD+R 4.7gb
LIGHTNING UK! Posted October 28, 2006 Posted October 28, 2006 You'll find somewhere selling Taiyo Yuden discs where that's the brand name, or you buy some using the TYG02 / TYG03 / YUDEN000-T02-00 / YUDEN000-T03-00 dyes. i.e. Verbatim / Plextor / Panasonic. If you buy them online you should be able to see the media id codes on the website. Most decent sites list them.
kortik Posted October 29, 2006 Author Posted October 29, 2006 (edited) thanks you for your time everybody I just went to the store and returned the junk DVD+Rs got some Verbatim the ID on it says MCC-004-00 and it burns flawless no probelm already burned 10 DVD w/out any errors. thanks again Edited October 29, 2006 by kortik
kevdriver Posted October 29, 2006 Posted October 29, 2006 Glad it worked out for you Kortik. Thanks for getting back.
kortik Posted October 29, 2006 Author Posted October 29, 2006 Yeah I love imageburn especially when burning DVD+R DL disk the best burning software ever thanks everybody
Flintkalle Posted October 31, 2006 Posted October 31, 2006 Hi, sorry for lending the thread. But I have the same problem with my NEC 2500A 1.07 and my brand new Verbatim DVD-R disc's. I get this error: [1:0:0] _NEC DVD_RW ND-2500A 1.07 (J:) (ATA) CDB: 53 00 00 00 00 00 22 A2 81 00 CDB Interpretation: Reserve Track - Sectors: 2 269 825 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 30 11 00 00 00 00 SENSE Interpretation: Cannot Format Medium - Unsupported Medium Write Speed Failed to Reserve Track! - Cannot Format Medium - Unsupported Medium Write Speed I've checked the media code for the discs on the webshop i ordered them from: media code: MCC03RG20/TYG03 I hope that someone can halp me with the problem.
LIGHTNING UK! Posted October 31, 2006 Posted October 31, 2006 Update your firmware and perhaps stick to 8x media next time. http://www.de.nec.de/software/1858_Firmwar...500A_WIN10A.zip That's the 1.0A firmware, you're currently only on 1.07.
polopony Posted October 31, 2006 Posted October 31, 2006 I've checked the media code for the discs on the webshop i ordered them from: media code: MCC03RG20/TYG03 these are actually 2 media codes the first Verbatim -R and the second TYG03 is Taiyo Yuden discs like LUK says your Firmware is really out of date , I have a 2500 and with the newest Firmware it definetly burns both of these discs
lfcrule1972 Posted October 31, 2006 Posted October 31, 2006 Maybe the retailers sends out either or in those dyes ? I have seen retailers do this before.........
Flintkalle Posted November 1, 2006 Posted November 1, 2006 Thanks Lightning UK. After I upgraded it, it worked
kortik Posted February 2, 2007 Author Posted February 2, 2007 (edited) Ok this is crazy I get the same errors but w/the best media, which is recomended by Plextor on their website. Ok just recived 200 pack DVD+R mediaID: YUDEN000 T02 000 but it sucks I've tried 4 dvds so far and my Plextor 716-A doesn't like it. Althogh if you look at this site http://www.plextor.be/technicalservices ? ed%20media hit the back button if you dont see anytihing and serach by media ID:YUDEN000 T02 000 Plextor recommended this media id for my drive. I have the latest firmware 1.10 I get errors and it wont burn at all using Imageburn I dont know what to do. I have 200 DVD+R and they wont burn so far I only tried 4 disk Im gonna trying to burn more to check I'll try more DVDs see if I can burn HELP I AM PISSED LOG I 22:23:52 ImgBurn Version 2.1.0.0 started! I 22:23:52 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 22:23:52 Initialising SPTI... I 22:23:52 Searching for SCSI / ATAPI devices... I 22:23:52 Found 2 DVD-ROMs and 1 DVD?RW! I 22:23:59 Operation Started! I 22:23:59 Source File: C:\Documents and Settings\KOT\Desktop\Three Outlaw Samurai\THREE OUTLAW SAMURAI.ISO I 22:23:59 Source File Sectors: 2,274,776 (MODE1/2048) I 22:23:59 Source File Size: 4,658,741,248 bytes I 22:23:59 Source File Volume Identifier: THREE OUTLAW SAMURAI I 22:23:59 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 22:23:59 Source File Implementation Identifier: mkisofs I 22:23:59 Source File File System(s): ISO9660, UDF (1.02) I 22:23:59 Destination Device: [0:0:0] PLEXTOR DVDR PX-716A 1.10 (D:) (ATA) I 22:23:59 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 4x, 6x, 8x, 12x, 16x) I 22:23:59 Destination Media Sectors: 2,295,104 I 22:23:59 Write Mode: DVD I 22:23:59 Write Type: DAO I 22:23:59 Write Speed: 16x I 22:23:59 Link Size: Auto I 22:23:59 Test Mode: No I 22:23:59 BURN-Proof: Enabled I 22:23:59 Filling Buffer... I 22:23:59 Writing LeadIn... W 22:24:21 Failed to Write Sectors 32 - 63 - Invalid Field in CDB W 22:24:21 Retrying (1 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (2 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (3 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (4 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (5 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (6 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (7 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (8 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (9 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (10 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (11 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (12 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (13 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (14 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (15 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (16 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (17 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (18 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (19 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB W 22:24:21 Retrying (20 of 20)... W 22:24:21 Retry Failed - Invalid Field in CDB E 22:24:22 Failed to Write Sectors 32 - 63 - Invalid Field in CDB I 22:24:22 Synchronising Cache... I 22:24:24 Closing Track... I 22:24:25 Finalising Disc... E 22:24:25 Finalise Disc Failed! - Reason: Empty or Partially Written Reserved Track E 22:24:25 Failed to Write Image! E 22:24:25 Operation Failed! - Duration: 00:00:26 I 22:24:25 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) Edited February 2, 2007 by kortik
LIGHTNING UK! Posted February 2, 2007 Posted February 2, 2007 They're actually 8x discs, not 16x ones (although the drive can burn at 16x). So if you've not already tried... do an 8x burn. Failing that, maybe your plextor is just faulty. My 716 died after a year and I just had it replaced by plextor. The new one came within a few days.
kortik Posted February 2, 2007 Author Posted February 2, 2007 (edited) Its impossible to blame it on my Plextor because after the burn using different speed the log is below I tried burning Verbatim MKM003 media DVD+R DL w/out a problem so its not my Plextor but something else. Well changing the speed to 8x didn't do anything same error. I 02:19:30 ImgBurn Version 2.1.0.0 started! I 02:19:30 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 02:19:30 Initialising SPTI... I 02:19:30 Searching for SCSI / ATAPI devices... I 02:19:30 Found 2 DVD-ROMs and 1 DVD?RW! I 02:19:43 Operation Started! I 02:19:43 Source File: C:\Documents and Settings\KOT\Desktop\Complete Torrents\Three Outlaw Samurai\THREE OUTLAW SAMURAI.ISO I 02:19:43 Source File Sectors: 2,274,776 (MODE1/2048) I 02:19:43 Source File Size: 4,658,741,248 bytes I 02:19:43 Source File Volume Identifier: THREE OUTLAW SAMURAI I 02:19:43 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR ? 1993 E.YOUNGDALE ? 1997 J.PEARSON/J.SCHILLING I 02:19:43 Source File Implementation Identifier: mkisofs I 02:19:43 Source File File System(s): ISO9660, UDF (1.02) I 02:19:43 Destination Device: [0:0:0] PLEXTOR DVDR PX-716A 1.10 (D:) (ATA) I 02:19:43 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 4x, 6x, 8x, 12x, 16x) I 02:19:43 Destination Media Sectors: 2,295,104 I 02:19:43 Write Mode: DVD I 02:19:43 Write Type: DAO I 02:19:43 Write Speed: 8x I 02:19:43 Link Size: Auto I 02:19:43 Test Mode: No I 02:19:43 BURN-Proof: Enabled I 02:19:43 Filling Buffer... I 02:19:44 Writing LeadIn... W 02:20:02 Failed to Write Sectors 32 - 63 - Invalid Field in CDB W 02:20:02 Retrying (1 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (2 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (3 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (4 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (5 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (6 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (7 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (8 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (9 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (10 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (11 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (12 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (13 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (14 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (15 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (16 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (17 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (18 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (19 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB W 02:20:02 Retrying (20 of 20)... W 02:20:02 Retry Failed - Invalid Field in CDB E 02:20:03 Failed to Write Sectors 32 - 63 - Invalid Field in CDB I 02:20:03 Synchronising Cache... I 02:20:04 Closing Track... I 02:20:05 Finalising Disc... E 02:20:06 Finalise Disc Failed! - Reason: Empty or Partially Written Reserved Track E 02:20:06 Failed to Write Image! E 02:20:06 Operation Failed! - Duration: 00:00:22 I 02:20:06 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) Here is Verbatim MKM003 DVD+R DL burn right after so many tries of TY media and its w/out a problem I 02:24:23 ImgBurn Version 2.1.0.0 started! I 02:24:23 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 02:24:23 Initialising SPTI... I 02:24:23 Searching for SCSI / ATAPI devices... I 02:24:23 Found 2 DVD-ROMs and 1 DVD?RW! I 02:24:24 Operation Started! I 02:24:24 Source File: C:\Documents and Settings\KOT\Desktop\Complete Torrents\Yumeji\YUMEJI.MDS I 02:24:24 Source File Sectors: 3,803,977 (MODE1/2048) I 02:24:24 Source File Size: 7,790,544,896 bytes I 02:24:24 Source File Volume Identifier: YUMEJI I 02:24:24 Source File Implementation Identifier: Sonic Scenarist 3.0 I 02:24:24 Source File File System(s): ISO9660, UDF (1.02) I 02:24:24 Destination Device: [0:0:0] PLEXTOR DVDR PX-716A 1.10 (D:) (ATA) I 02:24:24 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x) I 02:24:24 Destination Media Sectors: 4,173,824 I 02:24:24 Write Mode: DVD I 02:24:24 Write Type: DAO I 02:24:24 Write Speed: 16x I 02:24:24 Link Size: Auto I 02:24:24 Test Mode: No I 02:24:24 BURN-Proof: Enabled I 02:24:24 Optimal L0 Data Zone Capacity: 2,079,456 I 02:24:24 Optimal L0 Data Zone Method: Copied From Original Disc I 02:24:25 Filling Buffer... I 02:24:25 Writing LeadIn... I 02:25:21 Writing Image... I 02:25:21 Writing Layer 0... (LBA: 0 - 2079455) I 02:33:56 Writing Layer 1... (LBA: 2079456 - 3803976) I 02:41:05 Synchronising Cache... I 02:41:17 Closing Track... I 02:41:18 Finalising Disc... I 02:43:17 Image MD5: 484e1eaf34c9bc50aae0d80b946b62eb I 02:43:19 Operation Successfully Completed! - Duration: 00:18:52 I 02:43:19 Average Write Rate: 8,067 KB/s (5.8x) - Maximum Write Rate: 8,638 KB/s (6.2x) HEre is the log of most recent stuff Notice the minute I put Verbatim media it works ImgBurn.log Edited February 2, 2007 by kortik
dontasciime Posted February 2, 2007 Posted February 2, 2007 Your theory makes no sense unless the ty media you have is fake. Just because it burns to verbatim does not mean your plextor is not faulty, fair enough if you also burn thousands of disc's successfully with various dye, then the second you try and burn various batches of taiyo yuden you get a problem. Its like saying i tried ImgBurn to write to disc it failed but the 2nd i tried with nero it worked, as it would have not worked in nero and worked in ImgBurn if you had a time machine and reversed the order you tried. So maybe the tys you have are faulty or faked. Maybe your plextor is faulty. The plextor i had was faulty from day one woudl write 5 discs of the trot, t hen the next 5 would fail when trying to set book type on a dvd-r which is not possible but it still tried and destroyed multiple disc's. All you can do is update the firmware, make sure image is good, use decent media on a know clean install of XP or whichever operating system your using, then if it still fails like that accept it is faulty and return it as such.
kortik Posted February 2, 2007 Author Posted February 2, 2007 I dont belive that my Plextor is Faulty why would it burn on the other disk but not the TY media that I just bought It doenst make sense to me.
dontasciime Posted February 2, 2007 Posted February 2, 2007 OK then its not faulty , try burning some other DVD +R media that is not dual layer, try also tyg02 or 3 -r media. If it works with other +R single media and DVD-r media then the YUDEN + media you have is either substandard or faked
spinningwheel Posted February 4, 2007 Posted February 4, 2007 W 02:20:02 Failed to Write Sectors 32 - 63 - Invalid Field in CDB I get the same errors but w/the best media, which is recomended by Plextor I dont belive that my Plextor is Faulty It's your choice as to what you want to believe and not believe... Your disc's and drive have a compatibility problem...period. It matters not if Plextor recommended them or shipped them directly to your home from their warehouse...those particular discs don't work for you...get your money back from the supplier and buy more Verbs since they produce decent results on your machine.
Recommended Posts