Jump to content

Booktype for Dell HL-DT-ST dvd+-RW GU90N (sata)


Garyflyer

Recommended Posts

If it's anything like my HL BD drive, the HL-DT-ST BD-RE BU40N A102, in Write mode, right click on the target drive in the drop down list of available drives while it has selected your drive in question.  Towards the end, there's a Change Book Type option.  Try that and see if that does the trick.  I've never used it before so I don't know.

 

Link to comment
Share on other sites

Thanks for your help.  I've set the booktype on other DVD burners.  The booktype changes the default booktype of DVD+R to DVD-ROM. In the lower right hand corner of the ImgBrn GUI there is a small icon that looks like an open book or you can use the method you describe.  In either case you must select a/the tab that corresponds to your drive, i.e. Plextor Ricoh, Samsung, BenQ, LG, LITE-ON, NEC or NuTech.  I don't know what HL-DT-ST corresponds to.  I have tried all the available tabs, but the command fails.

Thanks again, Garyflyer

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.