Jump to content

philips dvd+r dl (burnt couple disk) Now says: incompatible medium installed


pricej051582

Recommended Posts

Thanks for responding. I'm not sure If this is what is being requested, however, under Device manager, DVD/CD-ROM drives: hp_DVDRW__DU8A6SH 

And beneath Firmware: System Firmware and nothing more when double clicking on System Firmware. 

Truly appreciate any suggestions on how to resolve this issue. 

Link to comment
Share on other sites

I 07:18:48 ImgBurn Version 2.5.8.0 started!
I 07:18:48 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 07:18:48 Total Physical Memory: 4,059,376 KiB  -  Available: 824,424 KiB
I 07:18:48 Initialising SPTI...
I 07:18:48 Searching for SCSI / ATAPI devices...
I 07:18:49 -> Drive 1 - Info: hp DVDRW  DU8A6SH DH61 (E:) (SATA)
I 07:18:49 Found 1 DVD±RW/RAM!

The above is all that reads in the log since it's not recognizing the blank dvd. 

At the Bottom of Imgburn; the program says: "Device Not Ready (Medium Not Present-Tray Open)"

I Close The Tray, Program Says: "Device Not Ready: Logical Unit In the process of becoming ready" then says: "Incompatible Medium Installed" 

It's not recognizing the disc. 

Please let me know if this is not what you're asking for, I'm not very tech inclined. 

Link to comment
Share on other sites

To me, it appears that there is a setting on the cd-rom or dvd drive itself preventing the recognition of the blank disks since three different burn programs are not recognizing the blank disk philips dvd+r dl rw disks. I was able to burn the dvd's a day or two before on these disks. The confusing is, i'm able to put in, and the program recognizes a dvd-r single layer disk, but doesn't have enough space for the burn. Seems the only issue is the dvd+r dl rw. 

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.