Jump to content

Problems burning in Vista


TLM

Recommended Posts

I've been having problems finding a good reliable burning program to use within Windows Vista. I can dual boot into XP and burn just about anything, without any problems at all, but can't get anything to burn correctly within Vista using ImgBurn. I've tried using the Microsoft driver (default) and even switching it over to the Elaborate Bytes driver. The problem is always the same: It starts to burn, gets to maybe 1% or 2%, then just stops and does nothing. Even aborting does nothing. I have to forcable close the program and reboot to regain control of the DVD drive. But I can use the EXACT same software on the exact same drive by dual-booting into Windows XP and have no troubles at all - any ideas? Here's an example of a typical burn log:

 

I 08:32:13 ImgBurn Version 2.1.0.0 started!

I 08:32:13 Microsoft Windows Vista Ultimate Edition (6.0, Build 5744)

I 08:32:13 Initialising ElbyCDIO...

I 08:32:13 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 5.1.1.2

I 08:32:13 Searching for SCSI / ATAPI devices...

I 08:32:13 Found 2 DVD?RWs!

I 08:32:49 Operation Started!

I 08:32:49 Source File: E:\CONTROL4.MDS

I 08:32:49 Source File Sectors: 340,928 (MODE1/2048)

I 08:32:49 Source File Size: 698,220,544 bytes

I 08:32:49 Source File Volume Identifier: CONTROL4

I 08:32:49 Source File Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT © 1997-2004 ROXIO, INC. - HAVE A NICE DAY

I 08:32:49 Source File Implementation Identifier: Roxio Toast

I 08:32:49 Source File File System(s): ISO9660, UDF (1.02)

I 08:32:49 Destination Device: [1:0:0] PLEXTOR DVDR PX-760A 1.02 (F:) (ATA)

I 08:32:49 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 6x, 8x, 12x, 16x)

I 08:32:49 Destination Media Sectors: 2,297,888

I 08:32:49 Write Mode: DVD

I 08:32:49 Write Type: DAO

I 08:32:49 Write Speed: MAX

I 08:32:49 Link Size: Auto

I 08:32:49 Test Mode: No

I 08:32:49 BURN-Proof: Enabled

I 08:32:50 Filling Buffer...

I 08:32:50 Writing LeadIn...

I 08:33:32 Writing Image...

Link to comment
Share on other sites

With XP and Vista on the same machine.... same drives, same hardware, same discs etc it can only be the drivers.

 

If there's no error shown (and it's stopped burning) it means the I/O call hasn't come back as being successful or that it failed. That's out of my (and any software's) control.

 

You'd do well to update to the 1.04 firmware and start using decent Verbatim (MCC dye) or Taiyo Yuden discs though.

Link to comment
Share on other sites

I also have XP and Vista on different drives but I am able to burn flawlessly with Vista.

 

The program Imgburn resides on my disc with XP but I load and run Imgburn from Vista. Since I have a ton of programs that were on my drive with XP, I have not added them to my new drive with Vista, only a few programs I run often.

 

 

You should not have any troubles with Vista burning.

Link to comment
Share on other sites

I too have tested buring with Vista, using an nForce 4 (AMD) motherboard and again on an Intel 975X ICH7 one.

 

There *shouldn't* be any problems but obviously something's not quite right on your PC.

 

I'd still do the firmware update and purchasing of decent discs before I waste too much time on it though if I were you.

Link to comment
Share on other sites

I'd still do the firmware update and purchasing of decent discs before I waste too much time on it though if I were you.

 

I'll try the firmware upgrade, but the Ritek / Ridata discs have typically been super in the past (DVD-R). I do use only the Verbatim's for DVD+R DL burning. Neither set of discs has ever given me problems in the past. But, I will do as suggested and report back as to what happens. Thanks!

Link to comment
Share on other sites

Strange - I've had no problems with Ritek / Ridata in the past (or present).

 

Anyways - I flashed the drive to 1.04 and changed the driver back to the built in driver and got the same results at 3%:

 

I 10:06:39 ImgBurn Version 2.1.0.0 started!

I 10:06:39 Microsoft Windows Vista Ultimate Edition (6.0, Build 5744)

I 10:06:39 Initialising SPTI...

I 10:06:39 Searching for SCSI / ATAPI devices...

I 10:06:39 Found 2 DVD?RWs!

I 10:07:24 Operation Started!

I 10:07:24 Source File Sectors: 469,299 (MODE1/2048)

I 10:07:24 Source File Size: 961,124,352 bytes

I 10:07:24 Source File Application Identifier: ULTRAISO V8.0 CD & DVD IMAGE CREATOR, COPYRIGHT ©2002-2006 EZB SYSTEMS, INC.

I 10:07:24 Source File File System(s): ISO9660, Joliet

I 10:07:24 Destination Device: [1:0:0] PLEXTOR DVDR PX-760A 1.04 (F:) (ATA)

I 10:07:24 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 6x, 8x, 12x, 16x)

I 10:07:24 Destination Media Sectors: 2,297,888

I 10:07:25 Write Mode: DVD

I 10:07:25 Write Type: DAO

I 10:07:25 Write Speed: MAX

I 10:07:25 Link Size: Auto

I 10:07:25 Test Mode: No

I 10:07:25 BURN-Proof: Enabled

I 10:07:25 Filling Buffer...

I 10:07:25 Writing LeadIn...

I 10:08:06 Writing Image...

 

 

Still stuck. Yet - I can open up CloneCD and burn ISO images (same file) without any problems... YET AGAIN - if I use their driver in ImgBurn - I get the same results.

 

So to recap:

 

SAME MEDIA, SAME OS, SAME DRIVE, SAME FIRMWARE, SAME DRIVER (ElbyCDIO), Different Programs (CloneCD vs. ImgBurn) = different results (CloneCD = Burn successfully, ImgBurn = Dud).

 

Now Lighting UK - you mentioned: "If there's no error shown (and it's stopped burning) it means the I/O call hasn't come back as being successful or that it failed. That's out of my (and any software's) control." - but I'm guessing it isn't quite so?? If CloneCD is working - but ImgBurn (and I used DVD Decrypter originally to try to burn with) both resulted in the exact same problem - is it possible how the program handles the messages back?? What is it that CloneCD does different?

 

Here are the logs files from CloneCD burning the exact same image using the same media and same drive etc... (even same session of Windows - did NOT reboot, I had to END TASK for ImgBurn - and normally I would reboot, but I just wanted to see what would happen and it worked fine):

 

I 10:19:02 AM CloneCD Version 5.2.8.1 started!

I 10:19:02 AM ElbyCDIO Driver 5.1.0.1

I 10:19:02 AM ElbyCDIO.dll 5.1.1.2

I 10:19:02 AM CCDDriver.dll 5.0.0.1

I 10:19:02 AM ElbyECC.dll 4.0.0.0

I 10:19:02 AM WriteDVD.dll 2.5.2.9

I 10:19:02 AM Registered to: City Radio Network

I 10:19:02 AM Searching for SCSI/ATAPI devices...

I 10:19:03 AM Device Scan found 0 CD-ROMs and 2 CD-Writers!

I 10:19:25 AM Starting copy from E:\image.iso to PLEXTOR DVDR PX-760A

I 10:19:25 AM Write Speed: Maximum

I 10:19:25 AM Writing Session 1 LeadIn...

I 10:19:25 AM Writing Session 1 image file...

I 10:21:40 AM Writing Session 1 LeadOut...

I 10:21:52 AM Duration of operation: 00:02:27

I 10:21:52 AM Average Speed: 6385 kBytes/s (4.73)

 

So I'm stumped.

Link to comment
Share on other sites

Here's an interesting update... I switched drives to the 2nd drive (which I hardly use for burning) which is a Pioneer 111 drive... and that seems to burn the images everytime without any problems. So it's isolated to the Plextor drive (which is by far, the better drive). But still doesn't explain why in CloneCD it'll work everytime on the Plextor.

Link to comment
Share on other sites

drive/driver issue or you got a spindle of disc's where some disc's are good and some are bad, eg if you had time machine and used the failed imgburn ones in clone, they still would have failed in clone, also when you got clone to burn disc, imgburn would have also burned that disc.

 

 

If however you have say 75 left on spindle and one after the other burned 20 of them using clone all successful, then tried to burn the next 5 in imgburn and all failed to start lead in etc, then although possible you had a run of 20 good disc's, and now you back to the duff ones. It would seem to indicate imgburn being at fault then. (doubt it though without it being somehow corrupted)

 

Have you set imgburn back to defaults and then tried ?

Link to comment
Share on other sites

I'm burning one after another after another without problems in CloneCD - but the moment I switch to ImgBurn - next 2 or 3 in a row will all fail. BUT - switching over to the Pioneer drive - they'll work fine again (only burned 2 so far this way - and both went without any problems).

 

I've already reset to defaults and uninstalled / reinstalled the program - no change. So whatever it is, seems to be linked to this Plextor drive in Windows Vista using ImgBurn... anyone else have the Plextor PX-760A drive and a copy of Vista willing to try this out for me? :)

Link to comment
Share on other sites

Like this you mean?

 

ImgBurn_Vista.png

 

I 16:49:28 ImgBurn Version 2.1.0.6 Beta started!

I 16:49:28 Microsoft Windows Vista Ultimate Edition (6.0, Build 5744)

I 16:49:28 Total Physical Memory: 1,047,488 KB - Available: 481,216 KB

I 16:49:28 Initialising SPTI...

I 16:49:28 Searching for SCSI / ATAPI devices...

I 16:49:28 Found 1 DVD-ROM and 1 DVD?RW!

I 16:49:51 Operation Started!

I 16:49:51 Source File: -==/\/[DISCOVERY IMAGE]\/\==-

I 16:49:51 Source File Sectors: 2,297,888 (MODE1/2048)

I 16:49:51 Source File Size: 4,706,074,624 bytes

I 16:49:51 Source File Volume Identifier: DISCOVERY_IMAGE

I 16:49:51 Source File File System(s): None

I 16:49:51 Destination Device: [0:0:0] PLEXTOR DVDR PX-760A 1.04 (O:) (ATA)

I 16:49:51 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 6x, 8x, 12x, 16x)

I 16:49:51 Destination Media Sectors: 2,297,888

I 16:49:51 Write Mode: DVD

I 16:49:51 Write Type: DAO

I 16:49:51 Write Speed: MAX

I 16:49:51 Link Size: Auto

I 16:49:51 Test Mode: No

I 16:49:51 BURN-Proof: Enabled

I 16:49:51 Filling Buffer...

I 16:49:51 Writing LeadIn...

I 16:50:48 Writing Image...

I 16:56:36 Synchronising Cache...

I 16:56:42 Operation Successfully Completed! - Duration: 00:06:51

I 16:56:42 Average Write Rate: 13,206 KB/s (9.5x) - Maximum Write Rate: 21,941 KB/s (15.8x)

I 16:56:42 Cycling Tray before Verify...

I 16:56:45 Device Ready!

I 16:56:45 Operation Started!

I 16:56:45 Source Device: [0:0:0] PLEXTOR DVDR PX-760A 1.04 (O:) (ATA)

I 16:56:45 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: RITEKF1) (Speeds: 6x, 8x, 12x, 16x)

I 16:56:45 Image File: -==/\/[DISCOVERY IMAGE]\/\==-

I 16:56:45 Image File Sectors: 2,297,888 (MODE1/2048)

I 16:56:45 Image File Size: 4,706,074,624 bytes

I 16:56:45 Image File Volume Identifier: DISCOVERY_IMAGE

I 16:56:45 Image File File System(s): None

I 16:56:45 Verifying Sectors... (LBA: 0 - 2297887)

I 17:03:53 Operation Successfully Completed! - Duration: 00:07:08

I 17:03:53 Average Verify Rate: 10,737 KB/s (7.8x) - Maximum Verify Rate: 16,534 KB/s (11.9x)

Link to comment
Share on other sites

I just downloaded the DVD speed, I had Cd/DVD spped but never installed it because I did not have the WNASPI32.dll so I just got the dvd version only. Should I get the 4.7.0.0?

 

Also could some post the levels for jitter etc, if they are posted elsewhere, just a pointer.

 

TIA

Link to comment
Share on other sites

Yes, the other versions are about a million years old.

 

What do you mean by post the levels? The lower the better (as is always the case with scans like these). I believe you want to keep jitter below 10.

 

Also, only Liteon and Benq (and maybe plextor?) drives support jitter reading like this.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.