Jump to content

Acronova Nimbie NB12 and drive not detected


mmichele

Recommended Posts

this is the log

 

I 11:28:40 ImgBurn Version 2.5.8.0 started!
I 11:28:40 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 11:28:40 Total Physical Memory: 16.683.092 KiB  -  Available: 10.247.936 KiB
I 11:28:40 Initialising BS_Robots...
I 11:28:40 BS_SDK Version 2.2.0.333 Build 2016.07.27
I 11:28:40 Initialising SPTI...
I 11:28:40 Searching for Auto Loader devices...
I 11:33:08 -> Auto Loader 1 - Info: Nimbie NB12 Ver:1.11.07.21
W 11:33:08 Auto Loader 1 has no drives associated with it!
E 11:34:26 Auto Loader 1 has no drives associated with it!
I 11:34:26 Found 1 Auto Loader!
I 11:34:26 Searching for SCSI / ATAPI devices...
I 11:34:27 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (E:) (SCSI)
I 11:34:27 Found 1 BD-ROM/HD DVD-ROM!
 

Link to comment
Share on other sites

What's listed under the Unita DVD/CD-ROM section?

The drive inside the Nimbie unit should show up in there.

When you power on the Nimbie, can you see / hear the drive doing anything? It could be that something has gone wrong with the unit itself.

Link to comment
Share on other sites

Why does the log list one entry as a Warning but right below it, the same line is listed as an Error?

 

I 11:28:40 Searching for Auto Loader devices...
I 11:33:08 -> Auto Loader 1 - Info: Nimbie NB12 Ver:1.11.07.21
W 11:33:08 Auto Loader 1 has no drives associated with it!
E 11:34:26 Auto Loader 1 has no drives associated with it!
I 11:34:26 Found 1 Auto Loader!

Link to comment
Share on other sites

8 hours ago, dbminter said:

Why does the log list one entry as a Warning but right below it, the same line is listed as an Error?

 

I 11:28:40 Searching for Auto Loader devices...
I 11:33:08 -> Auto Loader 1 - Info: Nimbie NB12 Ver:1.11.07.21
W 11:33:08 Auto Loader 1 has no drives associated with it!
E 11:34:26 Auto Loader 1 has no drives associated with it!
I 11:34:26 Found 1 Auto Loader!

because imgburn help me in select the unit.. but it is a clone unit..

Link to comment
Share on other sites

The actual drive inside the nimbie should be listed in the cd/dvd devices section within Device Manager. If it can’t see it, ImgBurn won’t be able to either.

The ‘elby clonedrive’ device that is listed is a virtual drive from a bit of software loaded on your pc. It has nothing to do with the nimbie unit.

So something is wrong with your Nimbie unit or the drive inside it.

Link to comment
Share on other sites

2 hours ago, LIGHTNING UK! said:

The actual drive inside the nimbie should be listed in the cd/dvd devices section within Device Manager. If it can’t see it, ImgBurn won’t be able to either.

The ‘elby clonedrive’ device that is listed is a virtual drive from a bit of software loaded on your pc. It has nothing to do with the nimbie unit.

So something is wrong with your Nimbie unit or the drive inside it.

is the problem with driver?

Link to comment
Share on other sites

3 hours ago, LIGHTNING UK! said:

I don’t know.

The unit itself shows up ok, so I’d say the driver is ok.

Speak to Acronova and see what they say.

You didn’t answer my questions about if you can hear or see the drive doing anything when you turn the nimbie on.

When I turn the nimbie, I hear the drive moves.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.