roden Posted January 11, 2007 Posted January 11, 2007 Hi all, check this error message out. http://www.rickfordrise.co.uk/images/j/error.jpg I have burned 10x xbox 360 games perfect, i have a LG-4163B 106 FW drive, and i was using Ridisc DL +R discs. I ran out, and purchased some infiniti 8x dl discs, now, whenever i go to write a disc, as soon as i press the write button i get http://www.rickfordrise.co.uk/images/j/error.jpg If i then press cancel, it starts writing the leadout track and coasters the disc, i have now lost 6 discs, what in the hell is going on???? Anybody.?????
roden Posted January 11, 2007 Author Posted January 11, 2007 please post a log of a failed burn Hi bud how do i get the log?
dontasciime Posted January 11, 2007 Posted January 11, 2007 (edited) try lowering the speed on them, don't think your gonna have much luck with those disc's with your particular drive, maybe its a completely duff batch of disc's, rather than just duff ones, if you were happy with the ridisc maybe get some more(little or no quality control on them or anything but verbs at the minute), or invest a little more money and be pretty much guaranteed a 100% burn with verbatim dl+ Edited January 11, 2007 by dontasciime
roden Posted January 11, 2007 Author Posted January 11, 2007 (edited) try lowering the speed on them, don't think your gonna have much luck with those disc's with your particular drive, maybe its a completely duff batch of disc's, rather than just duff ones, if you were happy with the ridisc maybe get some more(little or no quality control on them or anything but verbs at the minute), or invest a little more money and be pretty much guaranteed a 100% burn with verbatim dl+ Well like i say, i burned 10x discs with ridisc and all were perfect, no coasters at all, these infiniti are supposed to be better. Heres the Log. HL-DT-ST DVDRAM GSA-4163B A106 (ATA) Current Profile: DVD+R DL Disc Information: Status: Incomplete Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Supported Write Speeds: 2.4x DVD?R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: No Physical Format Information (Last Recorded): Disc ID: RICOHJPN-D01-67 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 I 23:19:23 ImgBurn Version 2.1.0.0 started! I 23:19:23 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:19:24 Initialising SPTI... I 23:19:24 Searching for SCSI / ATAPI devices... I 23:19:24 Found 1 DVD?RW/RAM! I 23:22:04 Operation Started! I 23:22:04 Source File: G:\10 - CHRONO TFLUX\DONE\IMAGE.dvd I 23:22:04 Source File Sectors: 3,697,696 (MODE1/2048) I 23:22:04 Source File Size: 7,572,881,408 bytes I 23:22:04 Source File Volume Identifier: XBOX360 I 23:22:04 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 23:22:04 Source File File System(s): ISO9660, UDF (1.02) I 23:22:04 Destination Device: [2:3:0] HL-DT-ST DVDRAM GSA-4163B A106 (Z:) (ATA) I 23:22:04 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x) I 23:22:04 Destination Media Sectors: 4,173,824 I 23:22:04 Write Mode: DVD I 23:22:04 Write Type: DAO I 23:22:04 Write Speed: 1x I 23:22:04 Link Size: Auto I 23:22:04 Test Mode: No I 23:22:04 BURN-Proof: Enabled I 23:22:04 User Specified L0 Data Zone Capacity: 1,913,760 THEN ERROR POPS UP Edited January 11, 2007 by roden
roden Posted January 11, 2007 Author Posted January 11, 2007 PS then after this if i hit cancel it will try to finalize the disc, and screw it up, i have to reset the pc, to stop it wasting a disc every time, crap!
spinningwheel Posted January 11, 2007 Posted January 11, 2007 An I/O error generally indicates a firmware or disc problem. Using Ritek discs is not recommended here since the quality of their products has greatly decreased in the last....about 7-9 months. The only +R DL disc we recommend here is Verbatim. Since you did get some good burns, count yourself lucky and now move on to the recommended Verbs.
roden Posted January 11, 2007 Author Posted January 11, 2007 An I/O error generally indicates a firmware or disc problem. Using Ritek discs is not recommended here since the quality of their products has greatly decreased in the last....about 7-9 months. The only +R DL disc we recommend here is Verbatim. Since you did get some good burns, count yourself lucky and now move on to the recommended Verbs. So are you saying then, that these discs are so bad they will not even burn?, looks like ill be asking for a refund then.....
spinningwheel Posted January 11, 2007 Posted January 11, 2007 looks like ill be asking for a refund then..... That's the ticket!!!
roden Posted January 12, 2007 Author Posted January 12, 2007 Well i have contacted them about the discs, and ordered a Pioneer 111D, as well, not that i have ever had any trouble with my LG until now, i also cant stand pioneers, see how long this one lasts before the lazer burns out. This will be number 5.
dontasciime Posted January 12, 2007 Posted January 12, 2007 (edited) 1X writing use 2.4x if writer says only 1x then it looks like they are incompatible with your writer, check manufacturers website or rpc1.org for the latest firmware for your writer.(did not look b4 typing) so you may already have latest firmware. may be off the mark here, as there maybe 1x dl+ not seen any, 1x dl+ seems out of spec to me though. Edit ... BTW when i suggested lowering burn speed i assumed you were trying to write them at 8X, I meant try writing them at 2.4 Edited January 12, 2007 by dontasciime
lfcrule1972 Posted January 12, 2007 Posted January 12, 2007 Just to add my comments to this - if you look at the Media Section of this forum ( http://forum.imgburn.com/index.php?showforum=15 ) you will see that the results with DL media other than Verbs is very hit and miss. If you are looking to burn to DL's we only recommend the Verbs otherwise you can expect these kind of problems. I would say you did very well getting the succesful burns with the Ritek DL's....
avada Posted January 12, 2007 Posted January 12, 2007 I get this error message when I'm triyng to burn in build mode. It worked previously without problem.
zacoz Posted January 12, 2007 Posted January 12, 2007 @avada It's generally better to start a new thread unless you're encountering EXACTLY the same problem - avoids confusion. But anyway, could you post the log (Help --> ImgBurn Logs...) from that failed burn - it contains heaps of information that can help the guru's here narrow down your problem.
LIGHTNING UK! Posted January 12, 2007 Posted January 12, 2007 avada, Please don't hijack other peoples threads. Your question is more likely to be answered if you start your own one. You're attempting to overburn and the drive isn't having it. You should have had a warning message to that affect when you started off the burn. So basically, your image (or rather the files you're attempting to burn) is too big for the disc.
roden Posted January 12, 2007 Author Posted January 12, 2007 Well i must have been lucky lol, i used Ridisc Extreme 2.4x and burned 10 of them, all work perfect. My burner LG-4163B has latest 106 fw installed. Also this is the strange bit, this error pops up immediatley, before its even burnt a thing, it just will not touch them, then if i press cancel it write the leadout ttrack??? Anyway, my pioneer 111d will be here tomorrow, so ill try that, if thats no good these are going back anyway.
LIGHTNING UK! Posted January 12, 2007 Posted January 12, 2007 Indeed, the bit it's erroring out on is where it sets the layerbreak. This is done before and burning starts. The drives aren't stupid, if there's nothing to close then they won't close anything. The trouble is, when you set the LB position, some drives (perhaps all?) will actually write something to the disc. So even if it failed and ImgBurn didn't then try to finish the burn off nicely, the disc would still be useless.
avada Posted January 12, 2007 Posted January 12, 2007 avada, Please don't hijack other peoples threads. Your question is more likely to be answered if you start your own one. You're attempting to overburn and the drive isn't having it. You should have had a warning message to that affect when you started off the burn. So basically, your image (or rather the files you're attempting to burn) is too big for the disc. Thanks for the reply. Next time I will start an own.
Recommended Posts