Jump to content

Setting DVD-RW/DL Booktype


Cambion7

Recommended Posts

I have the following drive:

 

PIONEER DVD-RW DVR-108 1.14 (ATA)

Current Profile: DVD+R DL

 

I try to go to DVD Drive and change book-type settings but my make is not present. Where, if at all, can this be set? I'd love to use ImgBurn to burn a 7.7gig image (ISO) to a +R/DL media with a DVD-ROM booktype.

 

Thanks in advance.

Cambion7

Link to comment
Share on other sites

Well I ended up purchasing a Plextor PX-716UF and am running it off my firewire port. So far I've ripped The Skeleton Key in 12 minutes (I had never paid attention to how long the usual rip takes). I'll be testing the burn using the DVD+R 16x media in a little while.

 

For what it's worth, I ended up updated my Pioneer DVR-108 firmware to a DVR-108DX version 1.18 because the descriptor said that this firmware would automatically set bitsetting for book type to DVD-ROM for both DVD+R and DVD+R/DL.

 

Thanks again for everyones input on this matter. Now onto another question...

 

With ImgBurn, as with DVDD, the drive info on the right-hand pane says the current profile is DVD+R DL. When I go to the proper section to change book-type, make the change, get the "Success!" box, the profile on the right-hand pane doesn't change. Is this normal behavior for ImgBurn?

 

Best Regards,

Cambion7

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.