can someone tell me what went wrong here

[meathed666]

i was hoping to post this log and have soemone tell me what went awry. Single layer dvd-r? what di I do wrong?

 

 

;

I 11:58:16 ImgBurn Version 2.2.0.0 started!

I 11:58:16 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 11:58:16 Total Physical Memory: 2,095,504 KB - Available: 1,613,292 KB

W 11:58:16 Drive D:\ (FAT32) does not support single files > 4 GB in size.

I 11:58:16 Initialising SPTI...

I 11:58:16 Searching for SCSI / ATAPI devices...

I 11:58:17 Found 1 DVD-ROM and 1 DVD?RW/RAM!

I 11:59:09 Operation Started!

I 11:59:09 Source File: C:\Documents and Settings\HP_Administrator\My Documents\DVD MOVIES\bound\UNDEFINED.MDS

I 11:59:09 Source File Sectors: 2,274,304 (MODE1/2048)

I 11:59:09 Source File Size: 4,657,774,592 bytes

I 11:59:09 Source File Volume Identifier: UNDEFINED

I 11:59:09 Source File Implementation Identifier: Daikin U.S. Comtec Lab

I 11:59:09 Source File File System(s): ISO9660, UDF (1.02)

I 11:59:09 Destination Device: [1:0:0] HP DVD Writer 940d 3H23 (E:) (ATA)

I 11:59:09 Destination Media Type: DVD-R (Disc ID: ProdiscF02) (Speeds: 6x, 8x, 12x, 16x)

I 11:59:09 Destination Media Sectors: 2,297,888

I 11:59:09 Write Mode: DVD

I 11:59:09 Write Type: DAO

I 11:59:09 Write Speed: MAX

I 11:59:09 Link Size: Auto

I 11:59:09 Test Mode: No

I 11:59:09 BURN-Proof: Enabled

I 11:59:09 Filling Buffer... (40 MB)

I 11:59:10 Writing LeadIn...

I 12:00:00 Writing Image...

I 12:09:55 Synchronising Cache...

I 12:10:15 Image MD5: d1e444d067a5546a589effd11fcfe84a

I 12:10:15 Operation Successfully Completed! - Duration: 00:11:05

I 12:10:15 Average Write Rate: 7,657 KB/s (5.5x) - Maximum Write Rate: 8,398 KB/s (6.1x)

I 12:10:15 Cycling Tray before Verify...

W 12:10:22 Waiting for device to become ready...

I 12:10:35 Device Ready!

I 12:10:35 Operation Started!

I 12:10:35 Source Device: [1:0:0] HP DVD Writer 940d 3H23 (E:) (ATA)

I 12:10:35 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: ProdiscF02) (Speeds: 6x, 8x, 12x, 16x)

I 12:10:35 Image File: C:\Documents and Settings\HP_Administrator\My Documents\DVD MOVIES\bound\UNDEFINED.MDS

I 12:10:35 Image File Sectors: 2,274,304 (MODE1/2048)

I 12:10:35 Image File Size: 4,657,774,592 bytes

I 12:10:35 Image File Volume Identifier: UNDEFINED

I 12:10:35 Image File Implementation Identifier: Daikin U.S. Comtec Lab

I 12:10:35 Image File File System(s): ISO9660, UDF (1.02)

I 12:10:35 Verifying Sectors... (LBA: 0 - 2274303)

E 12:14:07 Failed to read Sector 7091 - L-EC Uncorrectable Error

E 12:14:07 Sector 7091 maps to File: VIDEO_TS\VIDEO_TS.VOB

E 12:14:07 Failed to Verify Sectors!

E 12:14:10 Operation Failed! - Duration: 00:03:32

I 12:14:10 Average Verify Rate: 67 KB/s (0.0x) - Maximum Verify Rate: 2,624 KB/s (1.9x)

I 12:14:21 Close Request Acknowledged

I 12:14:21 Closing Down...

I 12:14:21 Shutting down SPTI...

I 12:14:21 ImgBurn closed!

;

[Kenadjian]

i was hoping to post this log and have soemone tell me what went awry. Single layer dvd-r? what di I do wrong?

 

 

I 11:59:09 Destination Device: [1:0:0] HP DVD Writer 940d 3H23 (E:) (ATA)

I 11:59:09 Destination Media Type: DVD-R (Disc ID: ProdiscF02) (Speeds: 6x, 8x, 12x, 16x)

I 11:59:09 Destination Media Sectors: 2,297,888

 

I have no doubt what I highlighted would be your problem.

Try some TY discs or Verbs with MCC dye.

If you want persist with the ones you got, then lower your burn speed and see what happens, altho this is not really a fix, the discs are just shite.

Forget the lat bit, I see your drive only burnt them 6X anyway even tho you selected max, just while you're at it, you might want to check for firmware updates for your drive.