Jump to content

Did I choose the correct DL layer break?


DjKilla

Recommended Posts

The 3rd one from the top is "excellently excellent" as it has the advantage of having the whole of VTS3 (and higher VTSs) on a single layer.

 

Regards

Link to comment
Share on other sites

The 3rd one from the top is "excellently excellent" as it has the advantage of having the whole of VTS3 (and higher VTSs) on a single layer.
Dj, this is the answer to your question as posted by Blutach.
Link to comment
Share on other sites

If you look at the LBA column, you'll see that 4 and 5 are essentially the same thing, just different representations of it.

 

What you need to remember (or learn!) is that the order of files goes...

 

IFO -> VOBs -> BUP, (next VTS set) IFO -> VOBs -> BUP, (next VTS set)......

 

So by putting the IFO at the start of the 2nd layer, it's exactly as Blutach says - 'having the whole of VTS3 (and higher VTSs) on a single layer' - whereby 'single layer' is of course the 2nd one.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.