Jump to content

Burn problems...


burf

Recommended Posts

Hi - - I don't think this is necessarily related to ImgBurn, but thought I'd try my luck here.

 

Lately, I've been having problems with my burns.

The burns go ok, but verifying, I'm getting read failures (Failed to Read Sector 2210689 - No Seek Complete). Usually, around 97-98% of the verify.

I had no problems with my current Taiyo Yuden Silver Thermal 8X TYG02

DVD-R 100-pack... but suddenly, with 30 or so to go, this started... the last 5-10 burns.

 

So, I'm wondering if it's the discs, or my drive (NEC DVD_RW ND-3520AW) is going.

Could someone advise how to figure out what the problem is?

 

I have DVDInfoPro installed, but the graphs mean nothing to me ;)

 

Any help would be appreciated... thanks!

Link to comment
Share on other sites

Hi - - I don't think this is necessarily related to ImgBurn, but thought I'd try my luck here.

 

Lately, I've been having problems with my burns.

The burns go ok, but verifying, I'm getting read failures (Failed to Read Sector 2210689 - No Seek Complete). Usually, around 97-98% of the verify.

I had no problems with my current Taiyo Yuden Silver Thermal 8X TYG02

DVD-R 100-pack... but suddenly, with 30 or so to go, this started... the last 5-10 burns.

 

So, I'm wondering if it's the discs, or my drive (NEC DVD_RW ND-3520AW) is going.

Could someone advise how to figure out what the problem is?

 

I have DVDInfoPro installed, but the graphs mean nothing to me ;)

 

Any help would be appreciated... thanks!

Hello burf. Welcome to the ImgBurn forum.

 

Your problem could be happening for a number of different reasons. Please post a log of one of the burns.

Link to comment
Share on other sites

Thanks MJ ;)

 

Two logs below... one near the end of verify, & one in the middle.

I really appreciate your help!

Thanks again!

 

; //****************************************\\

; ImgBurn Version 2.3.2.0 - Log

; Saturday, 04 August 2007, 13:14:53

; \\****************************************//

;

;

I 12:37:11 ImgBurn Version 2.3.2.0 started!

I 12:37:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 12:37:11 Total Physical Memory: 785,904 KB - Available: 495,928 KB

I 12:37:11 Initialising SPTI...

I 12:37:11 Searching for SCSI / ATAPI devices...

I 12:37:11 Found 1 DVD

Link to comment
Share on other sites

i thought genuine TYG02 only went upto 8x ?

 

i know some drives will write faster than 8x to them ( plextor ? ) but not sure about an NEC . maybe soemone with a drive that writes faster than 8x to a genuine TYG02 disc can confirm if it shows more than 8x in the disc ID info part of the log

I 12:42:09 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 2x, 4x, 6x, 8x, 12x) :thumbup:

Link to comment
Share on other sites

yep it does mate, plextor 716 report 16x on them

 

PLEXTOR DVDR PX-716A 1.10 (SCSI)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2.297.888

Free Space: 4.706.074.624 bytes

Free Time: 510:40:38 (MM:SS:FF)

Supported Write Speeds: 4x; 6x; 8x; 12x; 16x

 

Pre-recorded Information:

Manufacturer ID: TYG02

 

Recording Management Area Information:

PLEXTOR DVDR PX-716A

 

Physical Format Information (Last Recorded):

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196.608

Last Physical Sector of Data Area: 2.495.103

Last Physical Sector in Layer 0: 0

 

an nec3500 reports 12x with tyg02

 

_NEC DVD_RW ND-3500AG 2.1B (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 2x, 4x, 6x, 8x, 12x

 

Pre-recorded Information:

Manufacturer ID: TYG02

 

Physical Format Information (Last Recorded):

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,495,103

Last Physical Sector in Layer 0: 0

Link to comment
Share on other sites

after manufacturers realized that tyg02's were about as good as it would ever get with blank media they started writting

overspeeding into their firmware

 

 

his nec original also plans for the future

 

TYG02 12x,8x,6x,4x,2x

TYG03 16x,12x,8x,6x,4x,2x

TYG04 16x,12x,8x,6x,4x,2x

TYG05 16x,12x,8x,6x,4x,2x

TYG06 16x,12x,8x,6x,4x,2x

 

:whistling:

Link to comment
Share on other sites

Nope... never tried a lens cleaner. Any recommendations?

 

Yeah, I've always been curious about the 12x, too, but never tried faster than 8x.

They are the genuine... got them from Supermediastore.

 

I was wondering about the disks, because it just started suddenly, and most of the bad burns are happening around 97-98%, which to me, tended to point to them, rather than the drive.

Luckily, it's usually in the credits, so I'm not trying another disk.

 

Anyone know of a good app that can test the drive?

Thanks again for the help!

Link to comment
Share on other sites

Just to throw my 2 cents into the mix, The drive is fairly old so it could be getting ready to retire. New drives are so reasonably priced now, it might be an idea to just buy a new one and be done with it. :)

Link to comment
Share on other sites

Yeah, I've thought about just buying a new one, but wondered if there is any good software, to diagnose drives.

As for the lens cleaner, I've never bought one. Anything specific to try?

 

Thanks again for the help!

Link to comment
Share on other sites

lens cleaner its a CD with a couple of bristles on one WET the other Dry drop some of the solution that comes with it onto the Wet bristle pop the CD into ROM drive and open my computer browse for the CD and it will have a few audio tracks on it play and follow instructions.

 

Depends where you live as to choice and price generally a couple of

Link to comment
Share on other sites

I used to just take drive apart get some lense cleaning cloth and isoprol alcohol and clean it that way, too much hassle with some drives though

 

Sounds like a warranty voider as well... :D

Link to comment
Share on other sites

The Lite-On you listed should be a pretty good drive. The new Samsungs, Pioneers and LG's are also strong contenders. I think the current Pioneers are 112D's and Blu should be able to give good insight on a good LG. Stay away from Sony, memorex & HP...they are typically rebranded drives from the manufacturers listed above with a slight premium in price added.

 

A cheap and reliable source would be http://www.newegg.com

Link to comment
Share on other sites

Hello, I am new to the forum and not that tech savy. I have been using the program successfully for a few months but now I can't burn anything. The program runs fine and even gives me the little jingle when complete, but when I check the disk to see if anything is on it, it's blank. Can anyone help me?

Link to comment
Share on other sites

Here's the log.

 

I 19:36:47 ImgBurn Version 2.3.2.0 started!

I 19:36:47 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 19:36:47 Total Physical Memory: 2,095,480 KB - Available: 1,512,424 KB

I 19:36:48 Initialising SPTI...

I 19:36:48 Searching for SCSI / ATAPI devices...

I 19:36:48 Found 1 DVD

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.