nwasquad Posted August 15, 2007 Posted August 15, 2007 I tried to burn a game I got via IMGBURN and I found several problems along the way. The game was TimeSplitters 2. Here is the error message that comes up on my Philips DVD+-RW drive when I tried to burn mini DVD (Ridata) at 2x write speed. It started up briefly but crashed soon after: I/O error! Device:[0:1:0] Philips DVD+-RW DVD8701 5D24(F ATA Scsi Status: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 10 00 Interpretation: Write(10) - Sectors: 0-15 Sense Area: 70 00 03 00 00 00 00 12 00 00 00 00 0C 00 00 00 00 00 00 01 02 03 04 05 Interpretation: Write Error Here is the log: I 00:40:33 ImgBurn Version 2.3.2.0 started! I 00:40:33 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 00:40:33 Total Physical Memory: 1,046,620 KB - Available: 621,348 KB I 00:40:34 Initialising SPTI... I 00:40:34 Searching for SCSI / ATAPI devices... I 00:40:34 Found 3 DVD-ROMs and 1 DVD±RW! I 00:42:51 Operation Started! I 00:42:51 Source File: D:\Timesplitters 2 NTSC USA\Timesplitters 2\Timesplitters 2.iso I 00:42:51 Source File Sectors: 712,880 (MODE1/2048) I 00:42:51 Source File Size: 1,459,978,240 bytes I 00:42:51 Source File Volume Identifier: TimeSplitters 2 I 00:42:51 Source File File System(s): None I 00:42:51 Destination Device: [0:1:0] PHILIPS DVD+-RW DVD8701 5D24 (F (ATA) I 00:42:51 Destination Media Type: DVD-R (Disc ID: RITEKG04 01) (Speeds: 4x) I 00:42:51 Destination Media Sectors: 714,544 I 00:42:51 Write Mode: DVD I 00:42:51 Write Type: DAO I 00:42:51 Write Speed: 2x I 00:42:51 Link Size: Auto I 00:42:51 Test Mode: No I 00:42:51 BURN-Proof: Enabled I 00:42:51 Filling Buffer... (40 MB) I 00:42:52 Writing LeadIn... W 00:43:22 Failed to Write Sectors 0 - 15 - Write Error W 00:43:22 Retrying (1 of 20)... W 00:43:22 Retry Failed - Invalid Address For Write W 00:43:22 Retrying (2 of 20)... W 00:43:22 Retry Failed - Invalid Address For Write W 00:43:22 Retrying (3 of 20)... W 00:43:22 Retry Failed - Invalid Address For Write W 00:43:22 Retrying (4 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (5 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (6 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (7 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (8 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (9 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (10 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (11 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (12 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (13 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (14 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (15 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (16 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (17 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (18 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (19 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write W 00:43:23 Retrying (20 of 20)... W 00:43:23 Retry Failed - Invalid Address For Write E 00:46:51 Failed to Write Sectors 0 - 15 - Write Error I 00:46:51 Synchronising Cache... E 00:46:52 Failed to Write Image! E 00:46:52 Operation Failed! - Duration: 00:04:01 I 00:46:52 Average Write Rate: N/A - Maximum Write Rate: N/A Please help me resolve this issue. Is my burner the problem? I tried looking for updated firmware for the Philips DVD8701 model which came shipped with my Dell system (Windows XP SP2 Professional) but there weren't any updates.
nwasquad Posted August 15, 2007 Author Posted August 15, 2007 Okay so I tried writing the iso file at 4x since I noticed that was the only supported speed by my blank mini DVDs and I encountered teh same error
blutach Posted August 15, 2007 Posted August 15, 2007 I 00:42:51 Destination Media Type: DVD-R (Disc ID: RITEKG04 01) (Speeds: 4x) Change to Verbatim or Taiyo Yuden blanks. No need for a mini DVD, unless your console requires it. Regards
nwasquad Posted August 15, 2007 Author Posted August 15, 2007 (edited) why? what is wrong with Ritek mini DVDs? and minis are required for me, I'm using a console that uses minis Edited August 15, 2007 by nwasquad
blutach Posted August 15, 2007 Posted August 15, 2007 Ritek media has gone downhill at a rapid rate in ther last couple of years. Really, try to find Verbatims or Yudens in minis. Not sure if they are made. Regards
nwasquad Posted August 15, 2007 Author Posted August 15, 2007 I checked their websites. Neither of them make minis. What could be wrong with IMGBURN though? Surely theres a solution besides swtiching media
LIGHTNING UK! Posted August 15, 2007 Posted August 15, 2007 If you can't use any other media you'll have to change your drive to one that can burn them - yours does not appear to be able to. You could try crossflashing to a BenQ 1640 if you've exhausted all attempts at getting it working. There's nothing 'wrong' with ImgBurn, the drive is just erroring out and ImgBurn is reporting the error. The software being used shouldn't even come into it as these are drive/firmware/media combination errors.
nwasquad Posted August 15, 2007 Author Posted August 15, 2007 sorry I didnt mean to be blaming IMGBURN as the problem. I meant more of what is wrong with my setup or drive that IMGBURN isnt working. And being a newb, could you explain how I could crossflash my drive to a BenQ 1640 or give me a link to such a tutorial? Thanks
LIGHTNING UK! Posted August 15, 2007 Posted August 15, 2007 Try the link from this thread http://club.cdfreaks.com/showthread.php?t=187779
Shamus_McFartfinger Posted August 15, 2007 Posted August 15, 2007 sorry I didnt mean to be blaming IMGBURN as the problem. I meant more of what is wrong with my setup or drive that IMGBURN isnt working. And being a newb, could you explain how I could crossflash my drive to a BenQ 1640 or give me a link to such a tutorial? Thanks Okey dokey.... how about I translate for you in non-geek technobabble? Your drive has its own internal software called "firmware". ImgBurn and other burning programs send a set of instructions to your drive telling it what to do and when to do it. Your drive will "listen" for these instructions and will usually do as it's told. If the firmware has a bug of some sort, it will occasionally not do what it's supposed to do. The people responsible for making the drive can issue what's called a "firmware update". This update is like a Windows update for your drive. It can correct problems or add new commands that Lightning_UK! and other programmers can utilise. Secondly, your drive is only as good as the media you put into it. Think of your media or disks as ingredients in a cake. If you use substandard ingredients in a cake it will show in the finished product. The same goes for media. If you use cheap and nasty media you're going to have problems. Use only Verbatim +R, Verbatim -R, Verbatim +R/DL or Taiyo Yuden -R and you'll be fine. Crossflashing can be done with certain drives because some drive manufacturers outsource to other companies. For example: Sony don't make their own drives. They're made by Lite-On. The same drive can be installed with different firmware from different companies. As drive A and drive B are essentially the same, they can use the firmware (internal software) from a different manufacturer. If you have problems with anything (such as understanding the different media types above) - ask. It's what we're here for. As Lightning_UK! said above, Imgburn isn't the source of most problems. Your drive is reporting an error and Imgburn is displaying it.
nwasquad Posted August 15, 2007 Author Posted August 15, 2007 yea I tried looking for a firmware update but Philips no longer makes/issues the drive I have so their site doesnt have a firmware update. I was able, however, to crossflash to a BenQ drive and use BenQ's website to get a firmware update but I'm still having trouble getting the drive to read/write my media. And for the record I am using Ritek/Ridata mini DVD with RitekG04 ink (supposedly Ritek changed their dye to one of poorer quality now but I still have the good dye in my batch). Finally, does imgburn automatically close sessions? i was trying to find that feature and i couldnt so i am asking.
LIGHTNING UK! Posted August 15, 2007 Posted August 15, 2007 So even with the drive now running the official BenQ 1640 BSRB firmware it still won't burn to those discs? Sounds like you're stuck then I'm afraid and you'll probably have to buy a new drive. To answer your other question - yes, ImgBurn always closes tracks / sessions / discs when it burns them.
nwasquad Posted August 15, 2007 Author Posted August 15, 2007 yup Lightning, even with my drive running with the BSRB firmware as a BenQ 1640, it's not burning; not to mention the only supported speed that comes up for the discs is still just 4x (same as in the original log). I DID however find a way to burn what I needed. I had an older computer that I'd used for about 10 years and still kept around with a now extinct Pioneer Drive and with that Pioneer drive I was able to burn my mini DVDs at 1x, 2x, and/or 4x (which is why I thought it weird the BenQ could only support and burn at 4x). The only hassle of course is moving everything over to that computer and burning that way. Thanks for the help.
LIGHTNING UK! Posted August 16, 2007 Posted August 16, 2007 You'll find a lot of newer drives do that. Hardly anything will burn at 1x these days, the drives are optimised for burning at faster speeds.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now