Jump to content

I'm on my last blank DVD, any suggestions.


Borador

Recommended Posts

So I have ripped an image of a professionally done wedding video using nero 7. The video loads perfectly when mounting the image on a virtual drive. I have tried burning the video twice, once using nero 7 and the other time using alcohol 120, which results in a completely unreadable disk (even in windows). It should be noted that the file itself is over 5 GB, so I am using dual layer disks. My burner is DL +R compatible so that shouldnt be a problem. I was reading on another site about ImgBurn, so I decided to give it a try, but am getting an error immediatlely about the file not being mastered for a dual layer disk (even though it was ripped from a DL disk). The log looks like this:

 

I 14:01:53 ImgBurn Version 2.3.2.0 started!

I 14:01:53 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 14:01:53 Total Physical Memory: 523,760 KB - Available: 229,428 KB

I 14:01:53 Initialising SPTI...

I 14:01:53 Searching for SCSI / ATAPI devices...

I 14:01:53 Found 1 CD-RW and 1 DVD±RW!

I 14:02:26 Operation Started!

I 14:02:26 Source File: C:\Documents and Settings\bob marley\Desktop\Image.nrg

I 14:02:26 Source File Sectors: 2,941,232 (MODE1/2048)

I 14:02:26 Source File Size: 6,023,643,136 bytes

I 14:02:26 Source File Volume Identifier: CORY_&_SARA

I 14:02:26 Source File Application Identifier: iDVD:6.0.3

I 14:02:26 Source File Implementation Identifier: Apple Computer, Inc.

I 14:02:26 Source File File System(s): ISO9660, UDF (1.02)

I 14:02:26 Destination Device: [1:1:0] _NEC DVD_RW ND-3550A 1.07 (E:) (ATA)

I 14:02:26 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)

I 14:02:26 Destination Media Sectors: 4,173,824

I 14:02:26 Write Mode: DVD

I 14:02:26 Write Type: DAO

I 14:02:26 Write Speed: MAX

I 14:02:26 Link Size: Auto

I 14:02:26 Test Mode: No

I 14:02:26 BURN-Proof: Enabled

E 14:02:31 Optimal L1 Data Zone Start LBA: None Found! (VTS_01) // The error is here

E 14:02:31 Operation Failed! - Duration: 00:00:05

I 14:02:31 Average Write Rate: N/A - Maximum Write Rate: N/A

 

This is frustrating, any help is appreciated.

Link to comment
Share on other sites

bin the one you have left and get something better Taiyo yuden or verbatim with ty or mcc dye

 

Actually scrap that your using dual layer so just get some verbatim 2.4x

 

another actually, you would be better off splitting that to 2 single layer discs

 

you get that used to seeing posts about that media erroring out :D

 

find a program that can compress a dual layer down to single layer

 

 

try using ImgBurns read mode

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.