Jump to content

Burning seems to stop at 92% lately - why?


PumpkinKing

Recommended Posts

Why does this keep happening? The latest times I've been trying to burn an IMG file, the burning goes up to 92% and then it says "Error, Interpretation: Check condition, Interpretation: Invalid Adress For Write" and other technical crap. I can look through the entire movie almost but it just stops at the end.

 

Anyone know why and how to fix it?

Link to comment
Share on other sites

Okay, here's the latest one:

 

 

I 16:55:11 ImgBurn Version 2.3.2.0 started!

I 16:55:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 16:55:11 Total Physical Memory: 2 095 196 KB - Available: 1 523 452 KB

I 16:55:11 Initialising SPTI...

I 16:55:11 Searching for SCSI / ATAPI devices...

I 16:55:11 Found 1 DVD±RW!

I 16:55:43 Operation Started!

I 16:55:43 Source File: C:\Documents and Settings\Robin & Sylle\Mina dokument\Downloads\####################.img

I 16:55:43 Source File Sectors: 2 273 704 (MODE1/2048)

I 16:55:43 Source File Size: 4 656 545 792 bytes

I 16:55:43 Source File Volume Identifier: LIVE_FREE_DIE_HARD_PROPER

I 16:55:43 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 16:55:43 Source File Implementation Identifier: mkisofs

I 16:55:43 Source File File System(s): ISO9660; UDF (1.02)

I 16:55:43 Destination Device: [1:0:0] PHILIPS DVD+-RW DVD8701 5D24 (N:) (ATA)

I 16:55:43 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2,4x; 4x; 8x; 12x; 16x)

I 16:55:43 Destination Media Sectors: 2 295 104

I 16:55:43 Write Mode: DVD

I 16:55:43 Write Type: DAO

I 16:55:43 Write Speed: MAX

I 16:55:43 Link Size: Auto

I 16:55:43 Test Mode: No

I 16:55:43 BURN-Proof: Enabled

I 16:55:44 Filling Buffer... (40 MB)

I 16:55:45 Writing LeadIn...

I 16:56:00 Writing Image... (LBA: 0 - 2273703)

W 17:01:04 Failed to Write Sectors 2109504 - 2109535 - Invalid Address For Write

W 17:01:04 Retrying (1 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (2 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (3 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (4 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (5 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (6 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (7 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (8 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (9 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (10 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (11 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (12 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (13 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (14 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (15 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (16 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (17 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (18 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (19 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:01:04 Retrying (20 of 20)...

W 17:01:04 Retry Failed - Invalid Address For Write

W 17:07:50 Retrying (21)...

W 17:07:50 Retry Failed - Invalid Address For Write

W 17:07:52 Retrying (22)...

W 17:07:52 Retry Failed - Invalid Address For Write

W 17:07:52 Retrying (23)...

W 17:07:52 Retry Failed - Invalid Address For Write

W 17:07:53 Retrying (24)...

W 17:07:53 Retry Failed - Invalid Address For Write

W 17:07:56 Retrying (25)...

W 17:07:56 Retry Failed - Invalid Address For Write

E 17:08:48 Failed to Write Sectors 2109504 - 2109535 - Invalid Address For Write

E 17:08:48 Next Writable Address: 2109232

I 17:08:49 Synchronising Cache...

I 17:08:50 Closing Track...

I 17:08:58 Finalising Disc...

E 17:09:09 Failed to Write Image!

E 17:09:11 Operation Failed! - Duration: 00:13:25

I 17:09:11 Average Write Rate: 5 493 KB/s (4.0x) - Maximum Write Rate: 21 346 KB/s (15.4x)

I 17:17:09 Close Request Acknowledged

I 17:17:09 Closing Down...

I 17:17:09 Shutting down SPTI...

I 17:17:09 ImgBurn closed!

Link to comment
Share on other sites

I 16:55:43 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2,4x; 4x; 8x; 12x; 16x)

I 16:55:43 Write Speed: MAX

Those are very poor quality discs, so try burning them at slower speeds and they might work. Also leave the Verify option enabled to ensure they were properly burnt. Next time you're buying blanks, get Verbatim or Taiyo Yuden discs and you'll never have this problem again.

Link to comment
Share on other sites

Hello everyone, this is my first post here. I also have this problem. First time it happened while verifying Verbatim 16X DVD-R, second time while verifying Verbatim 16X DVD+R. Every time, error was reported while verifying somewhere in the last 10% of disc. I haveNEC DVD+-RW ND-6650A 1.42 (ATA) in my laptop, and the max burning speed is 8x. So, I'm burning at half of DVDs writing speed, using Verbatim media and still getting this read errors? Why? :unsure:

post-8736-1191315329_thumb.png

post-8736-1191315339_thumb.png

Link to comment
Share on other sites

welcome to the forum

 

burning at 8X with that old of a laptop drive is a little dangerous, lower burn speed to 4x

 

the blanks are great at 8X in a newer dvd burner, laptop burners are not as good as regular full size, they break down quicker also

 

ps, it's better to start your own thread

Link to comment
Share on other sites

Thank You for your advice, and Your welcome. Will try it and see how it works out. Although I bought my laptop 2 years ago, i didn't use burner very often. I don't think I have burned more than 50 DVDs+CDs, even if we count RW-s. I'm sorry I used this tread, instead of creating new. I taught since I had same problem it should go in the same topic, and thus keeping the forum less cluttered. Well I have just one more question, and than I'll leave this topic alone :innocent: You said that laptop burners break down quicker. Can they the be replaced in such case? I know that memory, HD, can be replaced or upgraded, but i don't remember reading in manual about burner being replaced. Or maybe to buy external burner (rack + classic burner) is better option?

 

If You recommend second option, could You recommend some model, or what to look for when choosing. I can read from some forums that there is no brand that is reliable these days, not even if You by the most expensive one. It all depends on the production series you get your hands on. <_<

Link to comment
Share on other sites

Internal laptop drives are replacable , but VERY expenxive ,you will probably get 2 external burners for the same cost as a laptop dvd drive, and as long as you ahve usb 2 , you should happily reach 8x , but stick to 8x whatever PC set up you have, its more reliable

its worth doing as Chewy said above, reduce burn to 4x , or you may have to go as low as 2x ( despite what the manufacturer of the drive says it can do)

 

also in TOOLS>SETTINGS>READ tab , check the "set read speed" and set it to say 8x for data and see if that helps.

 

even though you errored out in the verify process, the disc may still be fully readable by a standalone dvd player

Link to comment
Share on other sites

Thank You both. I'll start looking for external burner. I've set the max burning speed in ImgBurn to 6x for now, I will lower it again, and again until those verify errors stop showing. I forgot to mention that even with the 8x speed, they show up roughly every 10th DVD. But I'll burn at lover speeds.

 

As for that read option that You recommend volvofl10, I don't think it would have any effect, since mu drive's max read speed for DVD+-R is already 8x. Don't have a standalone dvd player, but every time the verify fails, I try to copy that disc on a HD, just to be sure, and it always failed. But, if it's a video file, you can forward over the damaged place, so DVD isn't wasted completely. Thank You for your time.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.