Jump to content

Problems burning xbox360 game w/ imgburn


Recommended Posts

Hi, I just bought an external samsung dual layer dvd writer, and was trying to burn an xbox 360 game to a blank dl dvd+r. I did everything right, I think: saved the .ISO, created a .dvd file with the layer break info, set the layerbreak on IMGBurn to 1913760, and started burning to a VERBATIM dvd+r dual layer. Then IMGBurn burns the image (100% completion), and, in "verify" mode, the following message appears at the 50% mark:



DEVICE [0.0.0] TSSTcorp CD/DVDW SH-S182M SB05 (E: USB)

SciStatus: 0x02

Interpretation: Check Condition

CDB: 28 00 00 1D 33 A0 00 00 01 00

Interpretation: Read (10) – Sector: 1913760

Sense Area: 70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 00 00 00 00

Interpretation: Timeout on Logical Unit


When I insert the dvd into the xbox360, it says something like "invalid disk"

What am I doing wrong??? I already wasted 2 dl dvds and they aren´t exactly cheap! I have the latest firmware for the dvd and, of course, my 360 is modded.

Link to comment
Share on other sites

you do not have to manually set laybreak if .DVD is present )eg right click on .DVD and choose burn with ImgBurn and make sure your using the latest firmware for your writer and set booktype to DVD-ROM and burn at 2.4.



use xbc2.5 and it will create .DVD , the way you typed it appears as if your manually creating .DVD file and make sure in xbc2.5 you tick complete and not just partition


The full log would help as pointed out above.

Link to comment
Share on other sites

Please post the log from that burn (you can find it at Help/ImgBurn logs).



Here you go:


I 11:03:19 ImgBurn Version started!

I 11:03:19 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 11:03:19 Total Physical Memory: 1.178.152 KB - Available: 803.692 KB

I 11:03:19 Initialising SPTI...

I 11:03:19 Searching for SCSI / ATAPI devices...

I 11:03:19 Found 1 DVD-ROM/CD-RW and 1 DVD±RW/RAM!

I 11:03:43 Operation Started!

I 11:03:43 Source File: C:\Downloads\HALO3JOGOISO\ccclx-halo3.FIX.dvd

I 11:03:43 Source File Sectors: 3.825.924 (MODE1/2048)

I 11:03:43 Source File Size: 7.835.492.352 bytes

I 11:03:43 Source File Volume Identifier: XGD2DVD_NTSC

I 11:03:43 Source File Implementation Identifier: Sonic Scenarist 3.1

I 11:03:43 Source File File System(s): ISO9660; UDF (1.02)

I 11:03:43 Destination Device: [0:0:0] TSSTcorp CD/DVDW SH-S182M SB03 (E:) (USB)

I 11:03:43 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2,4x)

I 11:03:43 Destination Media Sectors: 4.173.824

I 11:03:43 Write Mode: DVD

I 11:03:43 Write Type: DAO

I 11:03:43 Write Speed: 2x

I 11:03:43 Link Size: Auto

I 11:03:43 Test Mode: No

I 11:03:43 BURN-Proof: Enabled

I 11:03:43 User Specified L0 Data Zone Capacity: 1.913.760

I 11:04:46 Filling Buffer... (40 MB)

I 11:04:47 Writing LeadIn...

I 11:05:04 Writing Image... (LBA: 0 - 3825923)

I 11:05:04 Writing Layer 0... (LBA: 0 - 1913759)

I 11:24:18 Writing Layer 1... (LBA: 1913760 - 3825923)

I 11:43:41 Synchronising Cache...

I 11:43:43 Closing Track...

I 11:43:58 Finalising Disc...

I 11:45:07 Image MD5: 94ff11b0d46d69935b9179e275f6165d

I 11:45:07 Operation Successfully Completed! - Duration: 00:41:24

I 11:45:07 Average Write Rate: 3.303 KB/s (2.4x) - Maximum Write Rate: 3.413 KB/s (2.5x)



I 14:03:12 Verifying Sectors... (LBA: 0 - 3825923)

I 14:03:12 Verifying Layer 0... (LBA: 0 - 1913759)

I 14:11:35 Verifying Layer 1... (LBA: 1913760 - 3825923)

W 14:16:51 Failed to Read Sector 1913760 - Timeout on Logical Unit

E 14:17:09 Failed to Read Sector 1913761 - Timeout on Logical Unit

E 14:17:10 Failed to Verify Sectors!

E 14:17:10 Operation Failed! - Duration: 00:14:02

I 14:17:10 Average Verify Rate: 4.572 KB/s (3.3x) - Maximum Verify Rate: 11.259 KB/s (8.1x)

I 14:21:39 Close Request Acknowledged

I 14:21:39 Closing Down...

I 14:21:39 Shutting down SPTI...

I 14:21:39 ImgBurn closed!



Oh, and i´ve already got the latest firmware for my dvd driver (it´s an external usb one, samsung SE-S184M)

Link to comment
Share on other sites

and started burning to a VERBATIM dvd+r dual layer.



strange looking verbatim disc's you have with ritek mid code


I 11:03:43 Destination Device: [0:0:0] TSSTcorp CD/DVDW SH-S182M SB03 (E:) (USB)

I 11:03:43 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2,4x)



Why not save yourself hassle and Buy the game then back it up using Genuine Verbatim + DL

Link to comment
Share on other sites

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.