Jump to content

burning log help


pyneface

Recommended Posts

I was wondering if anyone can help me in interpreting this log. Why do i get these errors? THANKS!

 

W 17:06:33 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied.

 

W 17:18:38 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Peripheral Device Write Fault

 

 

I 17:06:10 Searching for SCSI / ATAPI devices...

I 17:06:10 Found 1 DVD±RW/RAM!

I 17:06:10 Operation Started!

I 17:06:10 Source File: C:\Users\pyneface\Documents\DVD\dvd.iso

I 17:06:10 Source File Sectors: 2,147,248 (MODE1/2048)

I 17:06:10 Source File Size: 4,397,563,904 bytes

I 17:06:10 Source File Volume Identifier: DVD

I 17:06:10 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 17:06:10 Source File Implementation Identifier: ImgBurn

I 17:06:10 Source File File System(s): ISO9660, UDF (1.02)

I 17:06:10 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-851S 1.50 (E:) (ATA)

I 17:06:10 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 17:06:10 Destination Media Sectors: 2,295,104

I 17:06:10 Write Mode: DVD

I 17:06:10 Write Type: DAO

I 17:06:10 Write Speed: MAX

I 17:06:10 Link Size: Auto

I 17:06:10 Test Mode: No

I 17:06:10 BURN-Proof: Enabled

W 17:06:33 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied.

I 17:06:33 Filling Buffer... (40 MB)

I 17:06:34 Writing LeadIn...

I 17:07:00 Writing Image... (LBA: 0 - 2147247)

I 17:18:28 Synchronising Cache...

I 17:18:30 Closing Track...

I 17:18:31 Finalising Disc...

W 17:18:38 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Peripheral Device Write Fault

E 22:18:37 Finalise Disc Failed! - Reason: Cannot Write Medium - Incompatible Format

I 22:18:37 Finalising Disc (Last Attempt!)...

E 22:18:37 Finalise Disc Failed! - Reason: Cannot Write Medium - Incompatible Format

E 22:18:37 Failed to Write Image!

E 22:18:37 Operation Failed! - Duration: 05:12:27

I 22:18:37 Average Write Rate: 6,242 KB/s (4.5x) - Maximum Write Rate: 8,690 KB/s (6.3x)

I 22:18:37 Close Request Acknowledged

I 22:18:37 Closing Down...

I 22:18:43 Shutting down SPTI...

I 22:18:43 ImgBurn closed!

Link to comment
Share on other sites

Also that drive is by all accounts a very poor drive and has no support.

 

Check the maker of your laptop to see if they have any firmware updates for that drive.

 

buy some better disc's Verbatim MCC or TY

 

You would be better off using DVD-R as that drive cannot set dvd+r to dvd-rom if you have any reader/Player that requires +r to be set as dvd-rom

 

Failing that get yourself an external dvd writer

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.