Lucusade Posted October 16, 2007 Share Posted October 16, 2007 Im sure this is an issue that has been addressed by many of you before and i apologise for boring the life out of you, but ive search the net and cant find a definitive answer to my problem. Ive got a sony AW-G170A burner with fully updated firmware (mate of mine uses one with no coasters) and its running as the primary master on the secondary IDE channel. i extracted the .iso/.dvd using Schtrom version 3.3. I kept the task as whole disc (stealth extreme 3.0 splitvid), and used a sammy for the extraction. Im using Aone discs (with i think are rebaged RICOH discs) and again i know these work as my mate with the same burner has no problems (a coaster in 10, i think he said), but i have also had 2 coasters using Verbs. Using ImgBurn 2.3.2.0 I always get the same error. Half way through verification (just as it goes from one layer to the next) and i get the error below. My error log is this: SONY DVD RW AW-G170A 1.73 (ATA) Current Profile: DVD+R DL Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 3,825,936 Size: 7,835,516,928 bytes Time: 850:14:36 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1,913,760 Changeable: No TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 3825935) -> LeadOut (LBA: 3825936) Physical Format Information (ADIP): Disc ID: RICOHJPN-D01-67 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded): Disc ID: RICOHJPN-D01-67 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,579,023 Last Physical Sector in Layer 0: 2,110,367 Layer Information: Layer 0 Sectors: 1,913,760 (50.02%) Layer 1 Sectors: 1,912,176 (49.98%) ******************************************************************************** ****** I 19:33:06 ImgBurn Version 2.3.2.0 started! I 19:33:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 19:33:06 Total Physical Memory: 1,047,792 KB - Available: 620,612 KB I 19:33:06 Initialising SPTI... I 19:33:06 Searching for SCSI / ATAPI devices... I 19:33:06 Found 1 DVD±RW/RAM! I 22:45:23 Operation Started! I 22:45:23 Source File: C:\Documents and Settings\Luke\Desktop\Xbox 360 Files\Games\Two Worlds\IMAGE1.dvd I 22:45:23 Source File Sectors: 3,825,924 (MODE1/2048) I 22:45:23 Source File Size: 7,835,492,352 bytes I 22:45:23 Source File Volume Identifier: XGD2DVD_NTSC I 22:45:23 Source File Implementation Identifier: Sonic Scenarist 3.1 I 22:45:23 Source File File System(s): ISO9660, UDF (1.02) I 22:45:23 Destination Device: [1:0:0] SONY DVD RW AW-G170A 1.73 (E:) (ATA) I 22:45:23 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x) I 22:45:24 Destination Media Sectors: 4,173,824 I 22:45:24 Write Mode: DVD I 22:45:24 Write Type: DAO I 22:45:24 Write Speed: 2.4x I 22:45:24 Link Size: Auto I 22:45:24 Test Mode: No I 22:45:24 BURN-Proof: Enabled I 22:45:24 Optimal L0 Data Zone Capacity: 1,913,760 I 22:45:24 Optimal L0 Data Zone Method: Copied From Original Disc I 22:45:51 Filling Buffer... (40 MB) I 22:45:53 Writing LeadIn... I 22:45:54 Writing Image... (LBA: 0 - 3825923) I 22:45:54 Writing Layer 0... (LBA: 0 - 1913759) I 23:05:04 Writing Layer 1... (LBA: 1913760 - 3825923) I 23:24:48 Synchronising Cache... I 23:24:49 Closing Track... I 23:24:58 Finalising Disc... I 23:25:56 Image MD5: 22cf6e2fb9e9149c8b25e11dc7ecbefe I 23:25:57 Operation Successfully Completed! - Duration: 00:40:32 I 23:25:57 Average Write Rate: 3,279 KB/s (2.4x) - Maximum Write Rate: 3,465 KB/s (2.5x) I 23:25:57 Cycling Tray before Verify... I 23:26:25 Device Ready! I 23:26:26 Operation Started! I 23:26:26 Source Device: [1:0:0] SONY DVD RW AW-G170A 1.73 (E:) (ATA) I 23:26:26 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x) I 23:26:26 Image File: C:\Documents and Settings\Luke\Desktop\Xbox 360 Files\Games\Two Worlds\IMAGE1.dvd I 23:26:26 Image File Sectors: 3,825,924 (MODE1/2048) I 23:26:26 Image File Size: 7,835,492,352 bytes I 23:26:26 Image File Volume Identifier: XGD2DVD_NTSC I 23:26:26 Image File Implementation Identifier: Sonic Scenarist 3.1 I 23:26:26 Image File File System(s): ISO9660, UDF (1.02) I 23:26:26 Verifying Sectors... (LBA: 0 - 3825923) I 23:26:26 Verifying Layer 0... (LBA: 0 - 1913759) I 23:32:15 Verifying Layer 1... (LBA: 1913760 - 3825923) E 23:51:01 Failed to Read Sector 1913760 - Unrecovered Read Error E 23:51:01 Failed to Verify Sectors! E 23:51:01 Operation Failed! - Duration: 00:24:35 I 23:51:01 Average Verify Rate: 2,594 KB/s (1.9x) - Maximum Verify Rate: 16,009 KB/s (11.6x) ******************************************************************************** **************** Any ideas? Ive searched the net with these one for weeks and i cant find any definitive answer to what might be happening. thanks for any help. Link to comment Share on other sites More sharing options...
dontasciime Posted October 16, 2007 Share Posted October 16, 2007 Yet another post with log from crap media but says the same thing happens with Verbs. Do yourself a favour and buy another writer and use verbs @2.4x Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2007 Share Posted October 16, 2007 If Verbatims don't work either, clean your drive or buy a new one. The error is from the drive producing low quality burns which it then can't read back - or that the reading in general is messed up (cleaning may fix that, along with improving write quality). Never assume that because your mates drive / media combo work that yours will too. No two drives are created equal - nor are two spindles of discs. Link to comment Share on other sites More sharing options...
Lucusade Posted October 16, 2007 Author Share Posted October 16, 2007 Yet another post with log from crap media but says the same thing happens with Verbs. Do yourself a favour and buy another writer and use verbs @2.4x so would i be right to assume that my problem is poor media and a poor burner? obviously i could go out and buy a pioneer 112D and use verbs, but ideally i want to know what is wrong with the current set up i have. i can burn another verbs coaster and post the log if that helps (just didnt want to waste my discs) Link to comment Share on other sites More sharing options...
Lucusade Posted October 16, 2007 Author Share Posted October 16, 2007 If Verbatims don't work either, clean your drive or buy a new one. The error is from the drive producing low quality burns which it then can't read back - or that the reading in general is messed up (cleaning may fix that, along with improving write quality). Never assume that because your mates drive / media combo work that yours will too. No two drives are created equal - nor are two spindles of discs. cheers for that lightning. i appriciate the response. i will invest in a pioneer and see where that goes. do you know if the pioneer will run as a slave to the samsung? the samsung only appears to read xbox discs when running as the master? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2007 Share Posted October 16, 2007 I have a pioneer 112 running as a slave (to a LiteOn though). No issues to report. The log from a Verb burn would come in handy - if nothing else than to see if you get the exact same error and in the same place. Link to comment Share on other sites More sharing options...
chewy Posted October 16, 2007 Share Posted October 16, 2007 Sony distributes these drives under their own brand, labelling them Sony AW-G170A (Optiarc AD-7170A) http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7170A/ I would try dee's 1.M1 with the drive as master(standalone) on those ricoh disks Link to comment Share on other sites More sharing options...
dontasciime Posted October 16, 2007 Share Posted October 16, 2007 Maybe try a cd cleaner on the sony drive b4 ditching it. That is if after cleaning it still refuses to write verbs at 2.4x EDIT . Consider Chewy's suggestion above b4 your buy new drive as well. Link to comment Share on other sites More sharing options...
Lucusade Posted October 16, 2007 Author Share Posted October 16, 2007 The log from a Verb burn would come in handy - if nothing else than to see if you get the exact same error and in the same place. i'll see if i saved the error logs. i know i took a screen shot of the error message that comes up, but i dont think i saved the full log. if not i will run a coaster through the burner for research purposes Link to comment Share on other sites More sharing options...
Lucusade Posted October 16, 2007 Author Share Posted October 16, 2007 I would try dee's 1.M1 with the drive as master(standalone) on those ricoh disks cheers chewy. i'll give it a go. whats the worse that can happen Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 16, 2007 Share Posted October 16, 2007 You can access the logs via the 'Help' menu. They're saved by default. Link to comment Share on other sites More sharing options...
Recommended Posts