Thrissy Posted November 1, 2007 Share Posted November 1, 2007 Hello guys, In this last couple of weeks i've burned about 10 games on DVD+R DL MediaRange but i needed to buy some more so i thit, 5 days later i got some new discs and wanted to burn again but this time i got a error :S ------------------------------------------------------------------------------- I/Q Error! Device: [2:1:0] BENQ DVD DC DW1670 103 (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 1D 95 E0 00 01 00 Interpretation: Read (10) - Sector: 1938912 Sense Area: F0 00 03 00 1D 95 EO 0A 00 00 20 00 02 00 00 00 00 00 Interpretation: No Seek Complete ------------------------------------------------------------------------------- I 23:38:42 ImgBurn Version 2.3.2.0 started! I 23:38:42 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:38:42 Total Physical Memory: 1.039.856 KB - Available: 697.724 KB I 23:38:42 Initialising SPTI... I 23:38:42 Searching for SCSI / ATAPI devices... I 23:38:42 Found 1 DVD±RW/RAM! I 23:39:58 Operation Started! I 23:39:58 Source File: C:\Program Files\BitLord\Downloads\Command.and.Conquer.3.Tiberium.Wars.PAL.XBOX360-RANT\rnt-cnc3.dvd I 23:39:58 Source File Sectors: 3.697.696 (MODE1/2048) I 23:39:58 Source File Size: 7.572.881.408 bytes I 23:39:58 Source File Volume Identifier: XGD2DVD_NTSC I 23:39:58 Source File Implementation Identifier: Sonic Scenarist 3.1 I 23:39:58 Source File File System(s): ISO9660; UDF (1.02) I 23:39:58 Destination Device: [2:1:0] BENQ DVD DC DW1670 103 (D:) (ATA) I 23:39:58 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2,4x; 4x; 6x) I 23:39:58 Destination Media Sectors: 4.173.824 I 23:39:58 Write Mode: DVD I 23:39:58 Write Type: DAO I 23:39:58 Write Speed: MAX I 23:39:58 Link Size: Auto I 23:39:58 Test Mode: No I 23:39:58 BURN-Proof: Enabled I 23:39:58 Optimal L0 Data Zone Capacity: 1.913.760 I 23:39:58 Optimal L0 Data Zone Method: Copied From Original Disc I 23:41:00 Filling Buffer... (40 MB) I 23:41:00 Writing LeadIn... I 23:41:04 Writing Image... (LBA: 0 - 3697695) I 23:41:04 Writing Layer 0... (LBA: 0 - 1913759) I 23:49:55 Writing Layer 1... (LBA: 1913760 - 3697695) I 23:58:07 Synchronising Cache... I 23:58:08 Closing Track... I 23:58:10 Finalising Disc... I 23:59:28 Image MD5: d2ff89a62712d3f18cc6a66c82adbf3c I 23:59:28 Operation Successfully Completed! - Duration: 00:19:30 I 23:59:28 Average Write Rate: 7.236 KB/s (5.2x) - Maximum Write Rate: 8.402 KB/s (6.1x) I 23:59:28 Cycling Tray before Verify... W 23:59:36 Waiting for device to become ready... I 23:59:58 Device Ready! I 23:59:59 Operation Started! I 23:59:59 Source Device: [2:1:0] BENQ DVD DC DW1670 103 (D:) (ATA) I 23:59:59 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 2,4x; 4x; 6x) I 23:59:59 Image File: C:\Program Files\BitLord\Downloads\Command.and.Conquer.3.Tiberium.Wars.PAL.XBOX360-RANT\rnt-cnc3.dvd I 23:59:59 Image File Sectors: 3.697.696 (MODE1/2048) I 23:59:59 Image File Size: 7.572.881.408 bytes I 23:59:59 Image File Volume Identifier: XGD2DVD_NTSC I 23:59:59 Image File Implementation Identifier: Sonic Scenarist 3.1 I 23:59:59 Image File File System(s): ISO9660; UDF (1.02) I 23:59:59 Verifying Sectors... (LBA: 0 - 3697695) I 23:59:59 Verifying Layer 0... (LBA: 0 - 1913759) I 00:08:30 Verifying Layer 1... (LBA: 1913760 - 3697695) W 00:28:44 Failed to Read Sector 1938912 - No Seek Complete And i got 1 more little question about Dubble Layer because before i burn i always put it on 2.4x so when it's burning it stands on 2.4 but when the program wants to burn the second layer then it risses up to 6.0 +/-. Please help me with this ^^. Greetz Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 1, 2007 Share Posted November 1, 2007 Throw it in the bin and try again. If it happens again, switch to Verbatim 2.4x DVD+R DL media. Link to comment Share on other sites More sharing options...
Thrissy Posted November 1, 2007 Author Share Posted November 1, 2007 HHHHmmmm... it's weird because i already burned 10 working games and now i've got 5 dead disk but do you know how i can change the speed of the burning process on the second layer? Because when i put it on 2.4x speed then it will keep that way until the first layer is done and it will reise again up to +/- 6x speed on the second layer. Greetz, kev. Link to comment Share on other sites More sharing options...
polopony Posted November 2, 2007 Share Posted November 2, 2007 Verbs are the only discs that are really consistent in their quality when it comes to DL stuff .While you got 10 good ones then you get another batch of discs and 5 bad ones thats how it goes with iffy media. To set the write speed dont select max ,when you do the disc will start off writing slow and then as more info can be written to disc the speed increases to the max speed for the media in your case its 6x I 23:39:58 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2,4x; 4x; 6x) I 23:39:58 Write Speed: MAX with IMGburn in the write mode you'll see a box "Settings " (lower right side of the main window) under that you'll see write speed, from the drop down menu you can select the speed and the disc will burn at that speed only. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 2, 2007 Share Posted November 2, 2007 I 23:41:04 Writing Layer 0... (LBA: 0 - 1913759) I 23:49:55 Writing Layer 1... (LBA: 1913760 - 3697695) I 23:58:07 Synchronising Cache... The speed isn't changing after the LB, it's burning at 6x all the time. But then for that burn you'd left 'Write Speed' on MAX. I 23:39:58 Write Speed: MAX Link to comment Share on other sites More sharing options...
Thrissy Posted November 2, 2007 Author Share Posted November 2, 2007 Yeah i know, because i wanted to test it out 1 time on MAX (the other 4 times i put it on 2.4x) maybey that would work but stil got the same problem. Now i already have bruned 11 discs and stil got the same problem. O yeah, wanted to say 1 more thing maybey you guys know it what the problem could be. When it's ready burning it Verifys, and it will always quit on 50% :S. And about the speed that goes to about 6 / 8 is that normal 2 when it stands on 2.4x Hope you guys can help me, otherwise ty for the time and help. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 2, 2007 Share Posted November 2, 2007 If you set the speed to 2.4x it should burn at that speed (and no faster) for the entire disc, not just for the first layer. When you say 'quit' do you mean it errors out? (as in how it does in your initial post) That's normal if you use crappy media, it's not normal if you're using Verbatim discs and getting decent quality burns! Link to comment Share on other sites More sharing options...
Thrissy Posted November 2, 2007 Author Share Posted November 2, 2007 -----When you say 'quit' do you mean it errors out? (as in how it does in your initial post)----- Yes. This is the error that i got when the Verifying is on 50% sometimes 51% ^^. But the burning goes great it continue until the 100% and pops the disc out then it will go back in to Verify and then on 50% i got the error. I/Q Error! Device: [2:1:0] BENQ DVD DC DW1670 103 (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 1D 95 E0 00 01 00 Interpretation: Read (10) - Sector: 1938912 Sense Area: F0 00 03 00 1D 95 EO 0A 00 00 20 00 02 00 00 00 00 00 Interpretation: No Seek Complete otherwise shall i make some pictures so you can see it more propely. Ty for the time tho. Link to comment Share on other sites More sharing options...
Thrissy Posted November 2, 2007 Author Share Posted November 2, 2007 o yeah, about my pre posts i mensioned that it will reise the speed up on the second layer. but i meaned with the second layer -Verifying- . Link to comment Share on other sites More sharing options...
Thrissy Posted November 2, 2007 Author Share Posted November 2, 2007 Otherwise could it be that a virus is stopping it because the first 10 where going perfect true the burning proces and the verifying proces. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 2, 2007 Share Posted November 2, 2007 No, it's not a virus. Link to comment Share on other sites More sharing options...
polopony Posted November 3, 2007 Share Posted November 3, 2007 try 1 Verbatim disc , we've seen every other dual layer disc there is here and Verbs are the only ones that work time after time Link to comment Share on other sites More sharing options...
Thrissy Posted November 9, 2007 Author Share Posted November 9, 2007 Tried 1 Verbatim disc and it worked again . Cheers, Thank you guys. Greetz, Kevin. Link to comment Share on other sites More sharing options...
Recommended Posts