Jump to content

Problem burning ISO file


Pops

Recommended Posts

Trying to burn an ISO file created with Ulead Video Studio SE but keep getting a failure about 20% of the way in. Here is my log file:

 

I 21:16:22 ImgBurn Version 2.3.2.0 started!

I 21:16:22 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 21:16:22 Total Physical Memory: 522,992 KB - Available: 195,812 KB

I 21:16:22 Initialising SPTI...

I 21:16:22 Searching for SCSI / ATAPI devices...

I 21:16:22 Found 1 DVD±RW!

I 21:19:39 Operation Started!

I 21:19:39 Source File: C:\Documents and Settings\Dave\My Documents\Ulead VideoStudio SE\9.0\Disc Image file\Dawn\dvd.iso

I 21:19:39 Source File Sectors: 664,640 (MODE1/2048)

I 21:19:39 Source File Size: 1,361,182,720 bytes

I 21:19:39 Source File Volume Identifier: Dawn

I 21:19:39 Source File Implementation Identifier: Ulead Systems USA Inc.

I 21:19:39 Source File File System(s): ISO9660, UDF (1.02)

I 21:19:39 Destination Device: [1:0:0] AOPEN DUW1608/ARR A110 (E:) (ATA)

I 21:19:39 Destination Media Type: DVD+R (Disc ID: CMC MAG-E01-00) (Speeds: 4x, 6x, 8x)

I 21:19:39 Destination Media Sectors: 2,295,104

I 21:19:39 Write Mode: DVD

I 21:19:39 Write Type: DAO

I 21:19:39 Write Speed: MAX

I 21:19:39 Link Size: Auto

I 21:19:39 Test Mode: No

I 21:19:39 BURN-Proof: Enabled

I 21:19:40 Filling Buffer... (20 MB)

I 21:19:40 Writing LeadIn...

I 21:20:05 Writing Image... (LBA: 0 - 664639)

W 21:20:59 Failed to Write Sectors 134976 - 135007 - Unknown (0x91, 0x25)

W 21:20:59 Retrying (1 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (2 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (3 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (4 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (5 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (6 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (7 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (8 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (9 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (10 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (11 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (12 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (13 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (14 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (15 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (16 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (17 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (18 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (19 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:20:59 Retrying (20 of 20)...

W 21:20:59 Retry Failed - Unknown (0x91, 0x25)

W 21:21:15 Retrying (21)...

W 21:21:15 Retry Failed - Unknown (0x91, 0x25)

W 21:21:16 Retrying (22)...

W 21:21:16 Retry Failed - Unknown (0x91, 0x25)

E 21:21:16 Failed to Write Sectors 134976 - 135007 - Unknown (0x91, 0x25)

I 21:21:16 Synchronising Cache...

W 21:21:21 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Unknown (0x91, 0x25)

E 21:21:24 Synchronise Cache Failed! - Reason: Unknown (0x91, 0x25)

I 21:21:24 Synchronising Cache (Last Attempt!)...

I 21:21:24 Closing Track...

I 21:21:25 Finalising Disc...

E 21:22:47 Failed to Write Image!

E 21:22:48 Operation Failed! - Duration: 00:03:07

I 21:22:48 Average Write Rate: 3,802 KB/s (2.7x) - Maximum Write Rate: 5,618 KB/s (4.1x)

 

 

Any suggestions???

Edited by Pops
Link to comment
Share on other sites

most likely cause is the media your using CMC Mag . VERY low quality and consistency

21:19:39 Destination Media Type: DVD+R (Disc ID: CMC MAG-E01-00) (Speeds: 4x, 6x, 8x)

 

I am using TDK +R, I have used them for hundreds of burns with no problems until now. Will get a different media brand and try again.

Link to comment
Share on other sites

I am using TDK +R, I have used them for hundreds of burns with no problems until now. Will get a different media brand and try again.

 

Although they are TDK , TDK have used the CMC MAG dye , another example of leading brand companies using other peoples product in mabufacturing .

Have a look HERE

to see how many brands use the CMC ink/dye on +R media If your unsure what the ink/dye is, its the coloured layer you can see from the bottom side of the disc. Its this part that your writer ( burner) actually burns to create a series of 1's and 0's, the binary data

This in turn is what your player reads and interprates into sound, so basically a low quality dye or ink will not get perfect burning and so cant be read later on after the disc is created.

 

we have had cases of CMC ink/dye that wont read back straight after its been burned >_<

 

Vebratim and Taiyo yuden are probably the better manufacturers of ink/dye. In fact, verbatim actually use the Taiyo yuden dye on some of there +R media as well as the MCC dye ( MCC = Mitsubishi chemical company) , personally I'd go for the genuine Taiyo yuden as they DONT use any one elses dye/ink

Link to comment
Share on other sites

the dye/mid code may be an important factor, but quality control is just as important or even more so

 

look at the wide variance of pie/pif results from batch to batch of the same media, I have had verbatim and TY both that were substandard, but other batches that were near perfect

 

TY's original tyg01/4x dvd-r's were probably some of the best blanks made, I had some ricoh dvd+r 4x, that was end of stock(2 years old when I bought it) that burned with more consistency than newer batches of ty or verbatim, I seriously doubt it was the die, but the manufacturing process

 

Even the 4x ricoh burned better than my latest batches of verbatim, even at the same speeds(8x and 12x)

 

A few companies claim they use TY die and equiptment(presses) to manufacture disks outside of japan(hongkong for example)

these disks are pure crap, even if they were using the real dye, they can't get a good spread of it

 

We see a wide variance from verbatim, where the dye/mid codes are the same as the original plant used in singapore,

quality is all over the board.

 

Prodisc makes some verbatims in tawain, but they have a line of their own dye/disks that can and often does exceed the mcc quality.

 

Damn can of worms

Link to comment
Share on other sites

Id say both ink/dye and quality control go hand in hand

If the ink/dye isnt applied correctly in manufacture it doesnt matter if its the best ink/dye in the world. it will still be a poor disc

For that reason IMO Taiyo Yuden come out top every time . Ive only lost 7 -R's in over 800 discs. works out at less than 1% failure rate :thumbup:

I would say burn 16x TY's ( TYG03) at 8x though. i stuck to TYGO2's discs.

 

you MUST get Taiyos from a reputable source though, as mentioned, theres lots of fakes about

Link to comment
Share on other sites

Everyone,

 

I just did a burn with Sony +R DVDs and it worked perfectly. Guess the batch of TDKs I had had some bad disks as it was a pack of 50 and i have already successfully burned about 20. Thanks for the help...

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.