Jump to content

Successful burn won't play


DVD_Guy

Recommended Posts

I have done many, many copies to DVD5 but recently have been trying to get a good DVD9 burn that will play in a standalone player with no success.

 

Sony DVD RW DW-Q30A (YYS2)

Verbatim DVD+R DL (MKM001)

 

ripped using DVDFab Decrypter

ISO created and layer break set using PgcEdit

burn by ImgBurn

-invoked directly from PgcEdit

-no warning messages in the log

-verify successful

scanned disc using KProbe2

-showed a very good burn

-PI max 33

-PIF max 5

 

DVD plays perfectly on 3 different PC's

DVD will not play in a standalone player. I have tried 4 different players (all different brands). 2 would not play the disc at all. 2 appeared to play but produced only a blank grey screen.

 

None of this points to ImgBurn as the problem but I would appreciate any help you might be able to provide.

Link to comment
Share on other sites

I have done many, many copies to DVD5 but recently have been trying to get a good DVD9 burn that will play in a standalone player with no success.

 

None of this points to ImgBurn as the problem but I would appreciate any help you might be able to provide.

It is possible that the stand alone player you are using is not set up to play either + discs or at least + DL discs. You could try bit-setting to see if that would work but what you might want to try first is, if you are close by a Circuit City, Best Buy, etc. to take the disc with you and try it in some of the newer DVD players to see if it will work in any of them. If it does then you know the problem is with your player and not the disc.
Link to comment
Share on other sites

That's often the problem with buying a rebadged drive, poor firmware support, the liteon 1635 is a very decent drive with much better support.

http://club.cdfreaks.com/showthread.php?t=...ghlight=DW-Q30A

http://forum.rpc1.org/dl_firmware.php?cate...4&manufactor=30

 

be patient sony will come thru sooner or later

 

http://forum.rpc1.org/dl_firmware.php?download_id=2141

Edited by chewy
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.