Jump to content

ImgBurn 2.4.0.0 suddenly closes


warfab

Recommended Posts

Ok well I give up for tonight now!

 

Assuming your forum email accepts files, I'll mail you a build where you have to 'ok' each of the 3 TOC related commands in the morning and we'll take it from there.

 

Night!

 

Okay, will wait for the files...

Link to comment
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Out of curiosity what firmware was in the drive b4 you updated to 1.05

 

1.03. And before that 1.01 (stock firmware which came with my drive)

Upgraded to 1.05 since it gave me better performance with dvdrws.

Edited by warfab
Link to comment
Share on other sites

Did you read this about not updating 1.03 firmware with 1.05

 

Readme

 

GSA-H55L Version 1.05 Firmware Update

 

To update the firmware of the GSA-H55L please refer to the following instructions:

 

Note: Not following the subsequent update instructions explicitly will result in

permanent damage to your drive, for which LG will not be responsible.

 

This firmware update is for drives with original firmware versions below 1.03.

The drives must be original LG branded drives with the DVD Writer model number

GSA-H55L(no OEM units).

 

If you have an OEM unit, branded with another manufacturers name,

please contact that manufacturer for support and firmware updates.

 

This firmware update is for use only on PC¡¯s with Windows Vista, Windows XP,

Windows 2000.

 

¡Ø Critical Instructions: (to be followed carefully)

 

1. Connect the drive as¡°master¡±by it self, on the secondary IDE controller

with no other device on the same IDE cable, making note to set the jumper

on the back of the drive to the¡°master¡±position.

 

2. Download the file GSA-H55L_1.05(EW).ZIP to a folder of your choice.

This download includes this¡°Read me(ew)¡±text file,

as well as the GSA-H55L_1.05.EXE program, which will auto-update your drive's firmware.

 

3. Close all other programs including: screen saver, antivirus and/or power-down programs.

(If these programs are not closed, they will try to engage the PC,

during the update process, thus interrupting the update and damaging the drive).

 

4. Check the drive to ensure that there is no disk in the tray before you start

the update procedure.

 

5. Go into the folder with the update file and double click the GSA-H55L_1.05.EXE program

and click the ¡°update¡± button. Once the update is complete,

you will see ¡°Firmware Update Complete¡± and then advise you to reboot the system.

You will need to reboot your PC.

 

The update will be complete, after you reboot your system.

 

WARNING: Do not open any programs or start any system functions during the update,

as they will interfere with data transfer and damage the drive.

Do not cancel the operation once it has been started or the drive will

become permanently damaged, as a result.

 

[Edit] Looks more like a case of strange wording from LG as the 1.03 firmware update read me says

 

This firmware update is for drives with original firmware versions below 1.02.

The drives must be original LG branded drives with the DVD Writer model number

GSA-H55N(no OEM units).

 

The more I read it the more it makes no sense :D

Link to comment
Share on other sites

Next thing to try is running it in winbdg as mentioned in a previous post.

 

http://www.microsoft.com/whdc/devtools/deb...installx86.mspx

 

Load up windbg and click 'File' -> Open Executable.

 

Point it to the one I just sent you.

 

You'll then see some stuff scroll in the window and it'll appear to pause.

 

Click the 'Debug' menu and then 'Go'.

 

ImgBurn should then load up.

 

Go into Read mode and insert your disc.

 

Hopefully it'll then capture some sort of error.

Link to comment
Share on other sites

From Windbg after running ImgBurn a 2nd time...

 

(9a8.a68): Unknown exception - code 0eedfade (first chance)
(9a8.a68): Unknown exception - code 0eedfade (first chance)
(9a8.a68): Unknown exception - code 0eedfade (first chance)
(9a8.a68): Unknown exception - code 0eedfade (first chance)
(9a8.a68): Unknown exception - code 0eedfade (first chance)
(9a8.a68): Unknown exception - code 0eedfade (first chance)
(9a8.a68): Unknown exception - code 0eedfade (first chance)
(9a8.f0c): Access violation - code c0000005 (first chance)
First chance exceptions are reported before any exception handling.
This exception may be expected and handled.
eax=00000001 ebx=01846fc0 ecx=7c801600 edx=7c90eb94 esi=eeeeeeee edi=eeeeeeee
eip=00000001 esp=0386cc6c ebp=42000800 iopl=0         nv up ei pl zr na pe nc
cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00010246
00000001 ??              ???

Link to comment
Share on other sites

How about a copy of the windbg log?

 

The cgl shows everything is fine, it hasn't logged any errors.

 

My mistake, it was a cgl file that was created before I used windbg wherein I didn't load any cds and just exited imgburn.

Link to comment
Share on other sites

Not the cgl, the entire log from windbg.

 

It should contain loads more info than that.

 

It lists where all the various modules/dll are loaded into the memory address space. Then the bit where it crashes should list the address that crashed and hopefully it'll match with one of those modules.

 

I'm pretty certain the crash isn't inside ImgBurn's own code.

 

I can't even reproduce it under Win 95 / NT4 and everything crashes on that! lol

Link to comment
Share on other sites

Microsoft ® Windows Debugger Version 6.8.0004.0 X86
Copyright © Microsoft Corporation. All rights reserved.

CommandLine: E:\ImgBurn\ImgBurn.exe
Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path.           *
* Use .symfix to have the debugger choose a symbol path.                   *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is: 
ModLoad: 00400000 00dbd000   ImgBurn.exe
ModLoad: 7c900000 7c9b0000   ntdll.dll
ModLoad: 7c800000 7c8f5000   C:\WINDOWS\system32\kernel32.dll
ModLoad: 0cd00000 0cdc8000   E:\ImgBurn\CG32.DLL
ModLoad: 77dd0000 77e6b000   C:\WINDOWS\system32\ADVAPI32.DLL
ModLoad: 77e70000 77f01000   C:\WINDOWS\system32\RPCRT4.dll
ModLoad: 77d40000 77dd0000   C:\WINDOWS\system32\USER32.DLL
ModLoad: 77f10000 77f57000   C:\WINDOWS\system32\GDI32.dll
ModLoad: 77c00000 77c08000   C:\WINDOWS\system32\VERSION.DLL
ModLoad: 73000000 73026000   C:\WINDOWS\system32\WINSPOOL.DRV
ModLoad: 77c10000 77c68000   C:\WINDOWS\system32\msvcrt.dll
ModLoad: 773d0000 774d3000   C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\COMCTL32.DLL
ModLoad: 77f60000 77fd6000   C:\WINDOWS\system32\SHLWAPI.dll
ModLoad: 763b0000 763f9000   C:\WINDOWS\system32\COMDLG32.DLL
ModLoad: 7c9c0000 7d1de000   C:\WINDOWS\system32\SHELL32.dll
ModLoad: 77be0000 77bf5000   C:\WINDOWS\system32\MSACM32.DLL
ModLoad: 76b40000 76b6d000   C:\WINDOWS\system32\WINMM.dll
ModLoad: 76780000 76789000   C:\WINDOWS\system32\SHFOLDER.DLL
ModLoad: 774e0000 7761d000   C:\WINDOWS\system32\OLE32.DLL
ModLoad: 77120000 771ac000   C:\WINDOWS\system32\OLEAUT32.DLL
(dd4.594): Break instruction exception - code 80000003 (first chance)
eax=00251eb4 ebx=7ffdd000 ecx=00000001 edx=00000002 esi=00251f48 edi=00251eb4
eip=7c901230 esp=0012fb20 ebp=0012fc94 iopl=0         nv up ei pl nz na po nc
cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000202
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntdll.dll - 
ntdll!DbgBreakPoint:
7c901230 cc              int     3
0:000> g
ModLoad: 76390000 763ad000   C:\WINDOWS\system32\IMM32.DLL
ModLoad: 21150000 21161000   E:\ImgBurn\borlndmm.dll
ModLoad: 5ad70000 5ada8000   C:\WINDOWS\system32\uxtheme.dll
ModLoad: 51880000 51971000   C:\PROGRA~1\DVDIDL~1\DVDSYS.DLL
ModLoad: 10000000 10008000   C:\Program Files\FlashGet\fgmgr.dll
ModLoad: 74720000 7476c000   C:\WINDOWS\system32\MSCTF.dll
ModLoad: 018b0000 018b4000   C:\Program Files\Unlocker\UnlockerHook.dll
ModLoad: 018c0000 018ce000   C:\Program Files\PS Tray Factory\HKDll.dll
ModLoad: 755c0000 755ee000   C:\WINDOWS\system32\msctfime.ime
ModLoad: 5edd0000 5ede7000   C:\WINDOWS\system32\olepro32.dll
ModLoad: 01930000 01937000   C:\Program Files\Volumouse\vlmshlp.dll
ModLoad: 74000000 74056000   C:\WINDOWS\system32\pdh.dll
ModLoad: 74320000 7435d000   C:\WINDOWS\system32\ODBC32.dll
ModLoad: 711a0000 711a6000   C:\WINDOWS\system32\odbcbcp.dll
ModLoad: 77a80000 77b14000   C:\WINDOWS\system32\CRYPT32.dll
ModLoad: 77b20000 77b32000   C:\WINDOWS\system32\MSASN1.dll
ModLoad: 20000000 20017000   C:\WINDOWS\system32\odbcint.dll
ModLoad: 74810000 7497d000   C:\WINDOWS\system32\quartz.dll
ModLoad: 73b30000 73b45000   C:\WINDOWS\system32\mscms.dll
ModLoad: 76fd0000 7704f000   C:\WINDOWS\system32\CLBCATQ.DLL
ModLoad: 77050000 77115000   C:\WINDOWS\system32\COMRes.dll
ModLoad: 75f80000 7607d000   C:\WINDOWS\system32\browseui.dll
(dd4.594): Unknown exception - code 0eedfade (first chance)
(dd4.594): Unknown exception - code 0eedfade (first chance)
(dd4.594): Unknown exception - code 0eedfade (first chance)
(dd4.594): Unknown exception - code 0eedfade (first chance)
(dd4.594): Unknown exception - code 0eedfade (first chance)
(dd4.594): Unknown exception - code 0eedfade (first chance)
(dd4.594): Unknown exception - code 0eedfade (first chance)
(dd4.594): Unknown exception - code 0eedfade (first chance)
ModLoad: 771b0000 7727e000   C:\WINDOWS\system32\WININET.DLL
ModLoad: 71660000 71669000   C:\WINDOWS\system32\Normaliz.dll
ModLoad: 5dca0000 5dce5000   C:\WINDOWS\system32\iertutil.dll
ModLoad: 77fe0000 77ff1000   C:\WINDOWS\system32\Secur32.dll
ModLoad: 71ab0000 71ac7000   C:\WINDOWS\system32\ws2_32.dll
ModLoad: 71aa0000 71aa8000   C:\WINDOWS\system32\WS2HELP.dll
ModLoad: 76ee0000 76f1c000   C:\WINDOWS\system32\RASAPI32.dll
ModLoad: 76e90000 76ea2000   C:\WINDOWS\system32\rasman.dll
ModLoad: 5b860000 5b8b5000   C:\WINDOWS\system32\NETAPI32.dll
ModLoad: 76eb0000 76edf000   C:\WINDOWS\system32\TAPI32.dll
ModLoad: 76e80000 76e8e000   C:\WINDOWS\system32\rtutils.dll
ModLoad: 769c0000 76a73000   C:\WINDOWS\system32\USERENV.dll
ModLoad: 77c70000 77c93000   C:\WINDOWS\system32\msv1_0.dll
ModLoad: 76d60000 76d79000   C:\WINDOWS\system32\iphlpapi.dll
ModLoad: 722b0000 722b5000   C:\WINDOWS\system32\sensapi.dll
ModLoad: 71a50000 71a8f000   C:\WINDOWS\System32\mswsock.dll
ModLoad: 76f20000 76f47000   C:\WINDOWS\system32\DNSAPI.dll
ModLoad: 16080000 16099000   C:\Program Files\Bonjour\mdnsNSP.dll
ModLoad: 76fc0000 76fc6000   C:\WINDOWS\system32\rasadhlp.dll
ModLoad: 662b0000 66308000   C:\WINDOWS\system32\hnetcfg.dll
ModLoad: 71a90000 71a98000   C:\WINDOWS\System32\wshtcpip.dll
ModLoad: 61410000 61534000   C:\WINDOWS\system32\urlmon.dll
(dd4.730): Access violation - code c0000005 (first chance)
First chance exceptions are reported before any exception handling.
This exception may be expected and handled.
eax=00000001 ebx=018466f0 ecx=7c801600 edx=7c90eb94 esi=eeeeeeee edi=eeeeeeee
eip=00000000 esp=0376ce70 ebp=001b89af iopl=0         nv up ei pl zr na pe nc
cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00010246
00000000 ??              ???

Link to comment
Share on other sites

  • 1 year later...
Is there anything interesting in the Dr Watson folder?

 

C:\Documents and Settings\[username]\Local Settings\Application Data\Microsoft\Dr Watson

Just for info, I've been using ImgBurn for a while now, great great program.

 

I just upgraded to the latest version (2.4.2.0) and I'm seeing the exact same problems as is highlighted here.

 

I have two DVD+-RW drives (both DVD-RAM capable) and when trying to create an ISO from a CD, the program just disappears. DVDs work OK.

 

DVD Drives are:

HL-DT-ST DVDRAM GSA-4163B (A106)

TSSTcorp CD/DVDW SH-S183L SB01 (SCSI)

 

Shane.

Link to comment
Share on other sites

Could you try doing what post #32 says?

 

By the way, there's firmware SB03 available for your SH-S183L burner. Remove any disc and close the tray before updating, then reboot after it has finished.

Thanks for the heads-up on the firmware....

 

This is what happens when I try to rea<d from CD in my TSST drive.....

 

CommandLine: "C:\Program Files\ImgBurn\ImgBurn.exe"

Symbol search path is: *** Invalid ***

****************************************************************************

* Symbol loading may be unreliable without a symbol search path. *

* Use .symfix to have the debugger choose a symbol path. *

* After setting your symbol path, use .reload to refresh symbol locations. *

****************************************************************************

Executable search path is:

ModLoad: 00400000 00ca9000 image00400000

ModLoad: 7c900000 7c9af000 ntdll.dll

ModLoad: 7c800000 7c8f6000 C:\WINDOWS\system32\kernel32.dll

ModLoad: 77dd0000 77e6b000 C:\WINDOWS\system32\ADVAPI32.DLL

ModLoad: 77e70000 77f02000 C:\WINDOWS\system32\RPCRT4.dll

ModLoad: 77fe0000 77ff1000 C:\WINDOWS\system32\Secur32.dll

ModLoad: 773d0000 774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.DLL

ModLoad: 77c10000 77c68000 C:\WINDOWS\system32\msvcrt.dll

ModLoad: 77f10000 77f59000 C:\WINDOWS\system32\GDI32.dll

ModLoad: 7e410000 7e4a1000 C:\WINDOWS\system32\USER32.dll

ModLoad: 77f60000 77fd6000 C:\WINDOWS\system32\SHLWAPI.dll

ModLoad: 763b0000 763f9000 C:\WINDOWS\system32\COMDLG32.DLL

ModLoad: 7c9c0000 7d1d7000 C:\WINDOWS\system32\SHELL32.dll

ModLoad: 77be0000 77bf5000 C:\WINDOWS\system32\MSACM32.DLL

ModLoad: 76b40000 76b6d000 C:\WINDOWS\system32\WINMM.dll

ModLoad: 774e0000 7761d000 C:\WINDOWS\system32\OLE32.DLL

ModLoad: 77120000 771ab000 C:\WINDOWS\system32\OLEAUT32.DLL

ModLoad: 76780000 76789000 C:\WINDOWS\system32\SHFOLDER.DLL

ModLoad: 77c00000 77c08000 C:\WINDOWS\system32\VERSION.DLL

ModLoad: 73000000 73026000 C:\WINDOWS\system32\WINSPOOL.DRV

(ec8.670): Break instruction exception - code 80000003 (first chance)

eax=00251eb4 ebx=7ffd7000 ecx=00000000 edx=00000001 esi=00251f48 edi=00251eb4

eip=7c90120e esp=0012fb20 ebp=0012fc94 iopl=0 nv up ei pl nz na po nc

cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000202

*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntdll.dll -

ntdll!DbgBreakPoint:

7c90120e cc int 3

0:000> g

ModLoad: 6e600000 6e66a000 C:\PROGRAM FILES\NORTON INTERNET SECURITY\ENGINE\16.2.0.7\ASOEHOOK.DLL

ModLoad: 74720000 7476c000 C:\WINDOWS\system32\MSCTF.dll

ModLoad: 10d00000 10d0f000 C:\Program Files\Logitech\SetPoint\GameHook.dll

ModLoad: 10100000 1010e000 C:\Program Files\Logitech\SetPoint\lgscroll.dll

ModLoad: 78130000 781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.1433_x-ww_5cf844d2\MSVCR80.dll

ModLoad: 77690000 776b1000 C:\WINDOWS\system32\NTMARTA.DLL

ModLoad: 71bf0000 71c03000 C:\WINDOWS\system32\SAMLIB.dll

ModLoad: 76f60000 76f8c000 C:\WINDOWS\system32\WLDAP32.dll

ModLoad: 5edd0000 5ede7000 C:\WINDOWS\system32\olepro32.dll

ModLoad: 5ad70000 5ada8000 C:\WINDOWS\system32\uxtheme.dll

ModLoad: 74000000 74056000 C:\WINDOWS\system32\pdh.dll

ModLoad: 77a80000 77b15000 C:\WINDOWS\system32\CRYPT32.dll

ModLoad: 77b20000 77b32000 C:\WINDOWS\system32\MSASN1.dll

ModLoad: 74320000 7435d000 C:\WINDOWS\system32\ODBC32.dll

ModLoad: 711a0000 711a6000 C:\WINDOWS\system32\odbcbcp.dll

ModLoad: 01740000 01757000 C:\WINDOWS\system32\odbcint.dll

ModLoad: 74810000 7497d000 C:\WINDOWS\system32\quartz.dll

ModLoad: 73b30000 73b45000 C:\WINDOWS\system32\mscms.dll

ModLoad: 66e90000 66ed1000 C:\WINDOWS\system32\icm32.dll

ModLoad: 76fd0000 7704f000 C:\WINDOWS\system32\CLBCATQ.DLL

ModLoad: 77050000 77115000 C:\WINDOWS\system32\COMRes.dll

ModLoad: 75f80000 7607d000 C:\WINDOWS\system32\browseui.dll

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.670): Unknown exception - code 0eedfade (first chance)

ModLoad: 605d0000 605d9000 C:\WINDOWS\system32\mslbui.dll

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.670): Unknown exception - code 0eedfade (first chance)

(ec8.a64): Access violation - code c0000005 (first chance)

First chance exceptions are reported before any exception handling.

This exception may be expected and handled.

eax=00000001 ebx=02520000 ecx=7c801600 edx=7c90e4f4 esi=00001000 edi=00000000

eip=890bec90 esp=0262ccb4 ebp=6c646156 iopl=0 nv up ei pl zr na pe nc

cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010246

890bec90 ?? ???

 

It seems to catch an exception alright....

 

Shane

Link to comment
Share on other sites

And here's the log with my LG drive:

 

CommandLine: "C:\Program Files\ImgBurn\ImgBurn.exe"

Symbol search path is: *** Invalid ***

****************************************************************************

* Symbol loading may be unreliable without a symbol search path. *

* Use .symfix to have the debugger choose a symbol path. *

* After setting your symbol path, use .reload to refresh symbol locations. *

****************************************************************************

Executable search path is:

ModLoad: 00400000 00ca9000 image00400000

ModLoad: 7c900000 7c9af000 ntdll.dll

ModLoad: 7c800000 7c8f6000 C:\WINDOWS\system32\kernel32.dll

ModLoad: 77dd0000 77e6b000 C:\WINDOWS\system32\ADVAPI32.DLL

ModLoad: 77e70000 77f02000 C:\WINDOWS\system32\RPCRT4.dll

ModLoad: 77fe0000 77ff1000 C:\WINDOWS\system32\Secur32.dll

ModLoad: 773d0000 774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.DLL

ModLoad: 77c10000 77c68000 C:\WINDOWS\system32\msvcrt.dll

ModLoad: 77f10000 77f59000 C:\WINDOWS\system32\GDI32.dll

ModLoad: 7e410000 7e4a1000 C:\WINDOWS\system32\USER32.dll

ModLoad: 77f60000 77fd6000 C:\WINDOWS\system32\SHLWAPI.dll

ModLoad: 763b0000 763f9000 C:\WINDOWS\system32\COMDLG32.DLL

ModLoad: 7c9c0000 7d1d7000 C:\WINDOWS\system32\SHELL32.dll

ModLoad: 77be0000 77bf5000 C:\WINDOWS\system32\MSACM32.DLL

ModLoad: 76b40000 76b6d000 C:\WINDOWS\system32\WINMM.dll

ModLoad: 774e0000 7761d000 C:\WINDOWS\system32\OLE32.DLL

ModLoad: 77120000 771ab000 C:\WINDOWS\system32\OLEAUT32.DLL

ModLoad: 76780000 76789000 C:\WINDOWS\system32\SHFOLDER.DLL

ModLoad: 77c00000 77c08000 C:\WINDOWS\system32\VERSION.DLL

ModLoad: 73000000 73026000 C:\WINDOWS\system32\WINSPOOL.DRV

(998.d74): Break instruction exception - code 80000003 (first chance)

eax=00251eb4 ebx=7ffd5000 ecx=00000000 edx=00000001 esi=00251f48 edi=00251eb4

eip=7c90120e esp=0012fb20 ebp=0012fc94 iopl=0 nv up ei pl nz na po nc

cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000202

*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntdll.dll -

ntdll!DbgBreakPoint:

7c90120e cc int 3

0:000> g

ModLoad: 6e600000 6e66a000 C:\PROGRAM FILES\NORTON INTERNET SECURITY\ENGINE\16.2.0.7\ASOEHOOK.DLL

ModLoad: 74720000 7476c000 C:\WINDOWS\system32\MSCTF.dll

ModLoad: 10d00000 10d0f000 C:\Program Files\Logitech\SetPoint\GameHook.dll

ModLoad: 10100000 1010e000 C:\Program Files\Logitech\SetPoint\lgscroll.dll

ModLoad: 78130000 781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.1433_x-ww_5cf844d2\MSVCR80.dll

ModLoad: 77690000 776b1000 C:\WINDOWS\system32\NTMARTA.DLL

ModLoad: 71bf0000 71c03000 C:\WINDOWS\system32\SAMLIB.dll

ModLoad: 76f60000 76f8c000 C:\WINDOWS\system32\WLDAP32.dll

ModLoad: 5edd0000 5ede7000 C:\WINDOWS\system32\olepro32.dll

ModLoad: 5ad70000 5ada8000 C:\WINDOWS\system32\uxtheme.dll

ModLoad: 74000000 74056000 C:\WINDOWS\system32\pdh.dll

ModLoad: 77a80000 77b15000 C:\WINDOWS\system32\CRYPT32.dll

ModLoad: 77b20000 77b32000 C:\WINDOWS\system32\MSASN1.dll

ModLoad: 74320000 7435d000 C:\WINDOWS\system32\ODBC32.dll

ModLoad: 711a0000 711a6000 C:\WINDOWS\system32\odbcbcp.dll

ModLoad: 01740000 01757000 C:\WINDOWS\system32\odbcint.dll

ModLoad: 74810000 7497d000 C:\WINDOWS\system32\quartz.dll

ModLoad: 73b30000 73b45000 C:\WINDOWS\system32\mscms.dll

ModLoad: 66e90000 66ed1000 C:\WINDOWS\system32\icm32.dll

ModLoad: 76fd0000 7704f000 C:\WINDOWS\system32\CLBCATQ.DLL

ModLoad: 77050000 77115000 C:\WINDOWS\system32\COMRes.dll

ModLoad: 75f80000 7607d000 C:\WINDOWS\system32\browseui.dll

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

ModLoad: 605d0000 605d9000 C:\WINDOWS\system32\mslbui.dll

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.d74): Unknown exception - code 0eedfade (first chance)

(998.2f0): Access violation - code c0000005 (first chance)

First chance exceptions are reported before any exception handling.

This exception may be expected and handled.

eax=00000001 ebx=015d0000 ecx=7c801600 edx=7c90e4f4 esi=00001000 edi=00000000

eip=891ecda8 esp=0250ccb4 ebp=63536153 iopl=0 nv up ei pl zr na pe nc

cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010246

891ecda8 ?? ???

 

Seems similar.

 

Shane.

Link to comment
Share on other sites

Decompress the exe using UPX and then try it.

 

You might have some low level tool (AV/spyware/adware monitoring etc) installed that sees the UPX compression in the exe file and thinks it's something nasty.

 

The program has a lot of error catching stuff built in so it's hard to get any sort of error within the code and the user not then get an error message on the screen. It would have to be really bad for it to just vanish from memory without an ImgBurn error OR a Windows one.

Link to comment
Share on other sites


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.