Jump to content

Unable to burn ISO image to dvd


MissEm

Recommended Posts

Hi All,

 

I'm hoping you can help me. Am trying to burn iso to disk and it is not working for me.

Am using an Asus notebook.

I used it fine with DVD Flick the other night and now I'm hitting a brick wall.

Have tried different discs as well.

 

The error log is as follows:

I 11:42:45 ImgBurn Version 2.4.2.0 started!

I 11:42:45 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 11:42:45 Total Physical Memory: 1,964,548 KB - Available: 917,860 KB

I 11:42:45 Initialising SPTI...

I 11:42:45 Searching for SCSI / ATAPI devices...

I 11:42:45 Found 1 DVD

Link to comment
Share on other sites

most likely case of the notebook drive does not like those discs . try vebatim or taiyo yuden discs instead.

 

You could try changing the write speed to 8x or even 4x instead of "max" with thoe youve got, it may/may not work

 

Thanks for the response I will give it a go.

I'm confused though as to why the TDK disc I used the other night worked fine, but now I can't use another TDK disc. They are from the same spool of disks I purchased.

 

Will get a Vebatim on my break and let you know.

I tried the x4 and x8, but no good. Same error.

I'm concerned that it might have something to do with my drive????

I tried to burn the iso with power2go and it would not write either.

 

Thanks

MissEm

Link to comment
Share on other sites

unless you buy good/quality media, you can get 1 disc burns then the next fail all thw way thru the spindle of them

 

laptop drive are not the ebst in the world to be honest ( can safely say it as ive had 5 laptops thatw ere crap at burning)

If your going to be wanting to write many discs, I would advise you to invest in a good external USB writer to add to your notebook/laptop, as there much better than the internal drive .

 

Its worth looking to see if there's a firmware update for your drive though

Link to comment
Share on other sites

unless you buy good/quality media, you can get 1 disc burns then the next fail all thw way thru the spindle of them

 

laptop drive are not the ebst in the world to be honest ( can safely say it as ive had 5 laptops thatw ere crap at burning)

If your going to be wanting to write many discs, I would advise you to invest in a good external USB writer to add to your notebook/laptop, as there much better than the internal drive .

 

Its worth looking to see if there's a firmware update for your drive though

 

Ok, will definitely give the Verbatim's a go!

I tried to update the firmware and I have the best version available already.

It's one of those crazy things I guess!

 

Thanks for the helping hand.

Will let you know when I try the Verbatim!

 

Thanks again

 

MissEm.

Link to comment
Share on other sites

  • 3 weeks later...

hi all...even i'm havin prob burning a .dvd file...i'm new with this so need some advise....this is da msg i'm getin when burning with img burner...

 

I 15:01:54 ImgBurn Version 2.4.2.0 started!

I 15:01:54 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 15:01:54 Total Physical Memory: 2,095,956 KB - Available: 1,184,280 KB

I 15:01:54 Initialising SPTI...

I 15:01:54 Searching for SCSI / ATAPI devices...

I 15:01:54 Found 1 DVD-ROM and 1 DVD

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.