Jump to content

Can't writeout audio with cuesheet - "acmStreamconvertfailed"


slipkid

Recommended Posts

I'm having problems using IMGBURN 2.4.0.0 on my old Win98SE PC writing out CD-audio with cuesheets and can't figure out what's wrong. Maybe it is just some very stupid configuration setting error on my part but I'm stumped...

 

IMGBURN starts to write then gives an error of:

 

"acmStreamConvertfailed

reason - device handle is invalid"

 

At first I thought it was the media I was using since I was trying to use a new (crappy) type so I switched to tried and true Taiyo-Yudens but they fail the exact same way. I even tried varying the writespeeds - same error.

 

Then I thought my old Plextor Premium burner might be dying but I was able to write out non-audio stuff fine with IMGBURN so that's doesn't appear to be it (whew).

 

Then I thought maybe these cuesheets were corrupt in some way, so I loaded them into the write interface of EAC and they worked 100% fine, so there isn't anything fishy there either that I can see.

 

Also there is nothing fancy in the cuesheets, just one straight WAV file with trackmarks.

 

I searched up here for "acmstreamconvertfailed" and found 2 threads but neither of them apply to what I'm doing.

 

Here is an example of one of the cuesheets:

 

FILE "x cd2.wav" WAVE

TRACK 01 AUDIO

INDEX 01 00:00:00

TRACK 02 AUDIO

INDEX 01 09:52:72

TRACK 03 AUDIO

INDEX 01 15:23:41

TRACK 04 AUDIO

INDEX 01 26:23:21

TRACK 05 AUDIO

INDEX 01 36:21:00

TRACK 06 AUDIO

INDEX 01 39:41:58

TRACK 07 AUDIO

INDEX 01 43:26:34

TRACK 08 AUDIO

INDEX 01 48:25:54

TRACK 09 AUDIO

INDEX 01 59:56:66

TRACK 10 AUDIO

INDEX 01 61:32:01

TRACK 11 AUDIO

INDEX 01 67:44:60

 

 

Here is one of the IMGBURN logs:

 

; //****************************************\\

; ImgBurn Version 2.4.0.0 - Log

; Tuesday, 23 December 2008, 01:25:55

; \\****************************************//

;

;

I 01:25:07 ImgBurn Version 2.4.0.0 started!

I 01:25:07 Microsoft Windows 98 SE

I 01:25:07 Total Physical Memory: 130,588 KB - Available: 152 KB

W 01:25:07 Drive C:\ (FAT32) does not support single files > 4 GB in size.

W 01:25:07 Drive D:\ (FAT32) does not support single files > 4 GB in size.

W 01:25:07 Drive E:\ (FAT32) does not support single files > 4 GB in size.

W 01:25:08 Drive F:\ (FAT32) does not support single files > 4 GB in size.

W 01:25:08 Drive G:\ (FAT) does not support single files > 4 GB in size.

W 01:25:08 Drive H:\ (FAT32) does not support single files > 4 GB in size.

W 01:25:08 Drive I:\ (FAT32) does not support single files > 4 GB in size.

W 01:25:08 Drive J:\ (FAT32) does not support single files > 4 GB in size.

W 01:25:08 Drive K:\ (FAT32) does not support single files > 4 GB in size.

I 01:25:08 Initialising ASPI...

I 01:25:08 WNASPI32.DLL - Adaptec's ASPI Layer - ASPI for Win32 (95/NT) DLL - Version 4.71.1.0

I 01:25:08 Searching for SCSI / ATAPI devices...

I 01:25:08 Found 1 CD-ROM and 1 CD-RW!

I 01:25:23 Operation Started!

I 01:25:23 Source File: H:\cool\x cd2.cue

I 01:25:23 Source File Sectors: 339,701 (AUDIO/2352)

I 01:25:23 Source File Size: 798,976,752 bytes

I 01:25:23 Source File File System(s): None

I 01:25:23 Destination Device: [1:0:0] PLEXTOR CD-R PREMIUM 1.07 (M:)

I 01:25:23 Destination Media Type: CD-R (Disc ID: 97m26s66f)

I 01:25:23 Destination Media Sectors: 359,846

I 01:25:23 Write Mode: CD

I 01:25:23 Write Type: SAO

I 01:25:23 Write Speed: 40x

I 01:25:23 Test Mode: No

I 01:25:23 OPC: Yes

I 01:25:23 BURN-Proof: Enabled

I 01:25:23 Advanced Settings - PowerRec: Yes

I 01:25:35 Filling Buffer... (20 MB)

E 01:25:35 acmStreamConvert Failed! - Reason: Device handle is invalid.

E 01:25:35 File Name: x cd2.wav

I 01:25:41 Synchronising Cache...

W 01:25:44 User opted to skip the 'Close Track/Session/Disc' functions.

E 01:25:44 Failed to Write Image!

E 01:25:51 Operation Failed! - Duration: 00:00:20

I 01:25:51 Average Write Rate: N/A - Maximum Write Rate: N/A

I 01:25:54 Close Request Acknowledged

I 01:25:54 Closing Down...

I 01:25:54 Shutting down ASPI...

I 01:25:55 ImgBurn closed!

;

 

 

Any ideas? Regardless of this strange issue THX for this great program!

Link to comment
Share on other sites

This is why I release new versions of the program.

 

I'm sorry Lightning but I don't understand your reply.

 

Are you saying it is a bug (possibly fixed in a newer version) or are you making some kind of sarcastic reply, insulting me in some way I don't understand, because I said something wrong or offended you?? If I did I strongly apologize, I meant no offense, I was just trying to figure this out.

Link to comment
Share on other sites

My reply was indeed sarcastic. Sorry, that's just my sense of humour.

 

Update ImgBurn and that problem will cease to exist.

 

Thanks, I am truly an idiot. I actually have 2.4.2.0 but 4got to install it, thought I already was using the latest one, realize now I'm not. Plus I could've sworn I worked with these types of cuesheets b4 with no problems, but maybe I was thinking about my other PC.....

 

Happy Holidaze!

Link to comment
Share on other sites

You probably just had a 'problem' file that directshow didn't work for, hence the ACM fallback method kicks in and that had a bug in the version you were running.

 

THANKS for your help. The new version works with this kind of cuesheet now :-)

 

However I notice something strange that this version is doing which the older versions never did which I do not understand (and if possible I would like to disable it) so I will ask about that in a different thread.

 

P.S. Merry xmas & happy new year!

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.