Obbezz Posted February 18, 2009 Share Posted February 18, 2009 Could someon please help me.. I receive the following error when Im burning an xbox game while veryifing. Iam sorry i have no log file.. could someone help me anyway.. I/O Error! Device : [1:0:0] PIONEER RW DVR-116D 1.09 (G) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 1C DA B0 00 00 01 00 Interpretation: Read (10) Link to comment Share on other sites More sharing options...
spinningwheel Posted February 18, 2009 Share Posted February 18, 2009 Look in: Help>log to find your logfile. I/O errors are caused by your firmware/media/drive not playing nice together. Post the log or generate another one and post it and we can get a better idea of the nature of the problem. Link to comment Share on other sites More sharing options...
Obbezz Posted February 18, 2009 Author Share Posted February 18, 2009 (edited) Look in: Help>log to find your logfile. I/O errors are caused by your firmware/media/drive not playing nice together. Post the log or generate another one and post it and we can get a better idea of the nature of the problem. Thanks for the reply.. Im now at work and will try to do this this evening. Does the log file still excist after closing imgburn? Or do I have to mess up a DVD DL again? Thanks again for the reply! Edited February 18, 2009 by Obbezz Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 18, 2009 Share Posted February 18, 2009 Yes, they're saved automatically. Link to comment Share on other sites More sharing options...
Obbezz Posted February 18, 2009 Author Share Posted February 18, 2009 Yes, they're saved automatically. Perfect.. then I will post it this evening!! Thanks allot!! Link to comment Share on other sites More sharing options...
Obbezz Posted February 18, 2009 Author Share Posted February 18, 2009 herewith my log.. hope you can help me!! I 22:11:14 ImgBurn Version 2.4.2.0 started! I 22:11:14 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 22:11:14 Total Physical Memory: 1.179.056 KB - Available: 529.000 KB W 22:11:14 Drive H:\ (FAT32) does not support single files > 4 GB in size. I 22:11:14 Initialising SPTI... I 22:11:14 Searching for SCSI / ATAPI devices... I 22:11:15 Found 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 18, 2009 Share Posted February 18, 2009 I 22:11:56 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x; 8x) 2.4x might not be the best speed for that media in that drive with that firmware. You're potentially going to have to waste a few more discs trying the other 'supported' write speeds. If none work, read this: http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
Obbezz Posted February 18, 2009 Author Share Posted February 18, 2009 my first attempt was the correct one... thanks allot for your advice.. i tried burning at 6x and it worked perfectly.. Thanks again!! Link to comment Share on other sites More sharing options...
Shamus_McFartfinger Posted February 19, 2009 Share Posted February 19, 2009 I 22:54:06 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x; 8x) I'd seriously look at replacing your media with something better. Ritek aren't as good as they used to be. Link to comment Share on other sites More sharing options...
Obbezz Posted February 20, 2009 Author Share Posted February 20, 2009 I 22:54:06 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x; 8x) I'd seriously look at replacing your media with something better. Ritek aren't as good as they used to be. Ritek? Iam using Platinum DL .. I thought this would be one of the better DVD DL... Any ways I tried to burn another game and it gave me the same error message.. see log: I 20:57:02 ImgBurn Version 2.4.2.0 started! I 20:57:02 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 20:57:02 Total Physical Memory: 1.179.056 KB - Available: 633.904 KB W 20:57:02 Drive H:\ (FAT32) does not support single files > 4 GB in size. I 20:57:02 Initialising SPTI... I 20:57:02 Searching for SCSI / ATAPI devices... I 20:57:12 Found 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 20, 2009 Share Posted February 20, 2009 The brand name on the discs doesn't mean anything, it's the dye that's important and yours is RITEK. I 20:57:28 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x; 8x) Don't forget to try 4x and 8x too. Just because 6x worked once doesn't mean it's the best. Link to comment Share on other sites More sharing options...
Obbezz Posted February 20, 2009 Author Share Posted February 20, 2009 Ok .. will try at 4x and 8x Will give you feed back... thanks.. Link to comment Share on other sites More sharing options...
Obbezz Posted February 20, 2009 Author Share Posted February 20, 2009 well that didn't paid off.. tried 4x and 8x .. heres my log file I 17:44:16 ImgBurn Version 2.4.2.0 started! I 17:44:16 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 17:44:16 Total Physical Memory: 1.179.056 KB - Available: 569.908 KB W 17:44:16 Drive H:\ (FAT32) does not support single files > 4 GB in size. I 17:44:16 Initialising SPTI... I 17:44:16 Searching for SCSI / ATAPI devices... I 17:44:17 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted February 20, 2009 Share Posted February 20, 2009 Yes. Try with Verbatim 2.4x (MKM-001-00 dye) and it should work Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2009 Share Posted February 20, 2009 Odd. I have burned RITEK-S04-66 with my Pioneer DVR-115D and no issue except that the quality was a bit low. I also have the SATA version of your writer so I'll try to burn a disc with it also. Your Pioneer should also work well with Verbatim 8x rated DL discs, if you can't find the ones mmalves suggested. Get the Verbatims labeled 'Made in Singapore'. Link to comment Share on other sites More sharing options...
Obbezz Posted February 21, 2009 Author Share Posted February 21, 2009 Odd. I have burned RITEK-S04-66 with my Pioneer DVR-115D and no issue except that the quality was a bit low. I also have the SATA version of your writer so I'll try to burn a disc with it also. Your Pioneer should also work well with Verbatim 8x rated DL discs, if you can't find the ones mmalves suggested. Get the Verbatims labeled 'Made in Singapore'. well the stange thing is that it worked once with speed 6x and after that no luck... I am going to try another game.. maybe this was the problem! (unfortunatly I have only 1 ritek left.. after that i have to buy some new ones... I will try verbatim.. hopefully they will give me more luck.. Link to comment Share on other sites More sharing options...
Cynthia Posted February 22, 2009 Share Posted February 22, 2009 As I have the same burner except it's the SATA model, I burned some Sumvision discs (8x rated) with the same media code as you have. It's clear that selecting the right write speed is important. The 2.4x speed gives a very good result for this low priced disc, 35% cheaper than the Verbatims I use. I didn't get any write or verify errors during the burn with ImgBurn. 2.4x write speed 4x write speed 8x write speed As I comparison, here is a Verbatim 8x, burned at 2.4x write speed. Link to comment Share on other sites More sharing options...
Shamus_McFartfinger Posted February 22, 2009 Share Posted February 22, 2009 Odd. I have burned RITEK-S04-66 with my Pioneer DVR-115D and no issue except that the quality was a bit low. I also have the SATA version of your writer so I'll try to burn a disc with it also. Your Pioneer should also work well with Verbatim 8x rated DL discs, if you can't find the ones mmalves suggested. Get the Verbatims labeled 'Made in Singapore'. well the stange thing is that it worked once with speed 6x and after that no luck... I am going to try another game.. maybe this was the problem! (unfortunatly I have only 1 ritek left.. after that i have to buy some new ones... I will try verbatim.. hopefully they will give me more luck.. It's not strange. It's just the media. Ritek, Princo, CMC Magnetics etc.. are garbage. Some disks burn fine but fail later on. Some burn but won't verify. Some won't burn at all. There's no substitute for good media. Verbatim and Taiyo Yuden have been consistently good for years. After telling you how great this media is, don't get the Verbatim DVD-R/DL. They're a bit dodgy. Vebatim DVD-R, DVD+R and DVD+R/DL are fine though. Taiyo Yuden (any sort) I've never found a problem with. Link to comment Share on other sites More sharing options...
Obbezz Posted February 22, 2009 Author Share Posted February 22, 2009 I have only 1 ritek left.. im going to try to burn another game..2.4 speed .. after that i will purchase some verbatim... hopefully they will give my more luck.. will let you know.. Link to comment Share on other sites More sharing options...
Recommended Posts