Filler Posted February 19, 2009 Share Posted February 19, 2009 (edited) I am using Verbatime DVD-R 16x and when I try to burn a iso it only goes 2x and disk doesn't work or end up blank. Under my computer it shows CD Drive, but when I open or close the tray it shows DVD-RW Drive I have no clue what is wrong any help would be appreciated. I already uninstalled the drive and rebooted but it did not help any. DISCINFO VERSION : 1.6.1.6 VENDOR : Optiarc MODEL : DVD RW AD-5530A REVISION : AX33 VENDOR SPECIFIC : Dec27,2006 LOADING MECHANISM : Tray SERIAL NUMBER : [if you need this ill add it] NUMBER VOL. LEVELS : 256 BUFFER SIZE : 2048KB INTERFACE : ATAPI RPC2 SCHEME : NO ANALOG AUDIO PLAY : YES COMPOSITE OUTPUT : NO DIGITAL PORT-PORT1 : NO DIGITAL PORT-PORT2 : NO READ UPC CODE : YES MULTISESSION READ : YES MODE 2 FORM 1 : YES MODE 2 FORM 2 : YES READ ISRC CODE : YES READ BAD CODE : NO BUFFER UNDER-RUN : YES MT. RAINIER : NO CAN READ CDR : YES CAN READ CDRW : YES CAN READ CDRM2 : YES CAN WRITE CDR : YES CAN WRITE CDRW : YES CAN TEST WRITE : YES CAN READ DVD-ROM : YES CAN READ DVD-R : YES CAN READ DVD-RW : YES CAN READ DVD-RAM : YES CAN READ DVD+R : YES CAN READ DVD+RW : YES CAN WRITE DVD-R : YES CAN WRITE DVD-RW : YES CAN WRITE DVD-RAM : NO CAN WRITE DVD+R : YES CAN WRITE DVD+RW : YES MAX CDR READ SPEED : 24 MAX CDR WRITE SPEED: 63 Edited February 19, 2009 by Filler Link to comment Share on other sites More sharing options...
LOCOENG Posted February 19, 2009 Share Posted February 19, 2009 Post a log! Link to comment Share on other sites More sharing options...
Filler Posted February 19, 2009 Author Share Posted February 19, 2009 ;;; //****************************************\\; ImgBurn Version 2.4.2.0 - Log; Wednesday, 18 February 2009, 16:56:43; \\****************************************//;;I 16:25:06 ImgBurn Version 2.4.2.0 started!I 16:25:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)I 16:25:06 Total Physical Memory: 3,144,612 KB - Available: 2,626,728 KBI 16:25:06 Initialising SPTI...I 16:25:06 Searching for SCSI / ATAPI devices...I 16:25:06 Found 1 DVD Link to comment Share on other sites More sharing options...
Cynthia Posted February 19, 2009 Share Posted February 19, 2009 I 16:25:30 Write Speed: 3x I 16:25:30 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 6x, 8x) Set the write speed drop down box to 8x. 8x is the fastest your burner will burn with this media as you can see above. Also try to have the verify option enabled as that will show us/you if the disc can be read back (if it was burned ok). If you insert your previously burned discs in your computer and use Windows Explorer, can you see the files on the disc there? Link to comment Share on other sites More sharing options...
Filler Posted February 19, 2009 Author Share Posted February 19, 2009 (edited) I 16:25:30 Write Speed: 3x I 16:25:30 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2x, 4x, 6x, 8x) Set the write speed drop down box to 8x. 8x is the fastest your burner will burn with this media as you can see above. Also try to have the verify option enabled as that will show us/you if the disc can be read back (if it was burned ok). If you insert your previously burned discs in your computer and use Windows Explorer, can you see the files on the disc there? No I cant see the files on the disc. It just changes from DVD-RW drive to CD-Drive when I open it nothing is there and it says: This is what it says before I put a burned or blank disk in: Edited February 19, 2009 by Filler Link to comment Share on other sites More sharing options...
Cynthia Posted February 19, 2009 Share Posted February 19, 2009 I 16:25:30 Source File File System(s): None Sorry. I should have seen this before. What is it on the image you burned? A game? Link to comment Share on other sites More sharing options...
Filler Posted February 19, 2009 Author Share Posted February 19, 2009 (edited) I 16:25:30 Source File File System(s): None Sorry. I should have seen this before. What is it on the image you burned? A game? Yes I burned one and it works fine but the rest of them do not. I have checked the ISO MD5 hash and it is not corrupt or anything. Edited February 19, 2009 by Filler Link to comment Share on other sites More sharing options...
mmalves Posted February 19, 2009 Share Posted February 19, 2009 Try with DVD+R media. And, as Cynthia said, leave Verify enabled as that ensures the disc was correctly burned Link to comment Share on other sites More sharing options...
Filler Posted February 19, 2009 Author Share Posted February 19, 2009 (edited) One with Verify on and worked. I 22:57:05 ImgBurn Version 2.4.2.0 started!I 22:57:05 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)I 22:57:05 Total Physical Memory: 3,144,612 KB - Available: 2,640,444 KBI 22:57:05 Initialising SPTI...I 22:57:05 Searching for SCSI / ATAPI devices...I 22:57:05 Found 1 DVD Edited February 19, 2009 by Filler Link to comment Share on other sites More sharing options...
Filler Posted February 19, 2009 Author Share Posted February 19, 2009 This one failed I 23:30:15 ImgBurn Version 2.4.2.0 started!I 23:30:15 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)I 23:30:15 Total Physical Memory: 3,144,612 KB - Available: 2,565,548 KBI 23:30:15 Initialising SPTI...I 23:30:15 Searching for SCSI / ATAPI devices...I 23:30:15 Found 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 19, 2009 Share Posted February 19, 2009 Try with some Taiyo Yuden 8x (TYG02 dye) media. Link to comment Share on other sites More sharing options...
Recommended Posts