Jump to content

problem with verbatim DL burning


carbo20

Recommended Posts

hello,

i burned 4 verbatim (made in singapure) dl +R without a problem. (speed 2.4)

in the 5th cd i got an error "tracking servo failed" (after 4 min) with speed 2.4

i tried to burn diffrenet image and got the same error (after 10 min) with speed 2.4

then i tried to burn again with different program (clonecd) speed 2.4 and still not working.

i got LG GH20NS10 EL01. (few months old).

what could be the problem?

Link to comment
Share on other sites

post a log please , and your filter driver load order

 

===============================================

Filter Driver Load Order - ImgBurn v2.4.3.0

===============================================

 

Upper Device Filter: [None Found]

Upper Class Filter: [None Found]

Device: CD/DVD-ROM Device

Lower Class Filter: ElbyCDFL

Lower Device Filter: [None Found]

 

Filter Name: ElbyCDFL

File Name: C:\Windows\System32\Drivers\ElbyCDFL.sys

File Version: 5, 2, 1, 3 [5.2.1.3]

File Description: ElbyCDIO Filter Driver

Product Name: CloneCD

Product Version: 5, 2, 1, 3 [5.2.1.3]

Company Name: SlySoft, Inc.

Copyright: Copyright © 2003 - 2006 SlySoft, Inc.

Link to comment
Share on other sites

That's the filter driver info, do you have the log too? (it's more important!)

 

I 08:54:20 ImgBurn Version 2.4.3.0 started!

I 08:54:20 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1)

I 08:54:20 Total Physical Memory: 4,191,824 KB - Available: 2,934,340 KB

I 08:54:20 Initialising SPTI...

I 08:54:20 Searching for SCSI / ATAPI devices...

I 08:54:20 Found 1 DVD

Link to comment
Share on other sites

Try burning at 4x, 6x or 8x and you might get a better burn. If that doesn't work then get Verbatim 2.4x (MKM-001-00 dye) Made in Singapore blanks and it should work :thumbup:

 

thanks for the answer.

i tried to burn with x4 speed. and got the same problem.

it strange that i could burn 4 cd (one after another with no problem at all) and then can't burn any of them.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.