Jump to content

Just started using Imgburn again


techman

Recommended Posts

Hi all,

I done a lot of changes to my system and now I need to burn some DVD+R and DVD+R DL media again so I installed latest version of Imgburn and reset to it to default settings. I need to update this later as now finding that the disk was not written to. I will try now to see what happens burning from a different drive. As a side note I patched my drives with the a Samsung Utility found at so I may need to revert to normal BIOS as well. Will post again after Ive done some testing

 

http://codeguys.rpc1.org/

 

 

Here is the log......

I 11:43:39 ImgBurn Version 2.4.4.0 started!

I 11:43:39 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 11:43:39 Total Physical Memory: 2,094,924 KB - Available: 938,520 KB

I 11:43:39 Initialising SPTI...

I 11:43:39 Searching for SCSI / ATAPI devices...

I 11:43:41 Found 2 DVD

Link to comment
Share on other sites

Copy + paste the disc info please.

 

Not sure if you wanted Device Info or log so posting both from startup with problem media

 

Device Info

TSSTcorp CDDVDW SH-S223Q SB03 (Fibre)

Current Profile: DVD+R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,295,104

Free Space: 4,700,372,992 bytes

Free Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 4x, 6x, 8x, 12x, 16x, 18x, 20x

 

Physical Format Information (ADIP):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: MCC-004-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Performance (Write Speeds):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 5,540 KB/s (4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 8,310 KB/s (6x)

Descriptor 3...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 11,080 KB/s (8x)

Descriptor 4...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 16,620 KB/s (12x)

Descriptor 5...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 22,160 KB/s (16x)

Descriptor 6...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 24,930 KB/s (18x)

Descriptor 7...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 27,700 KB/s (20x)

 

Log Info

 

I 14:24:31 ImgBurn Version 2.4.4.0 started!

I 14:24:31 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 14:24:31 Total Physical Memory: 2,094,924 KB - Available: 788,040 KB

I 14:24:31 Initialising SPTI...

I 14:24:31 Searching for SCSI / ATAPI devices...

I 14:24:33 Found 2 DVD

Link to comment
Share on other sites

So was that the disc you just burnt to? As in THE actual disc?

 

It seems a bit odd that the drive would report success to all of the disc writing commands without actually making a single change to the disc.

 

What controller is that drive connected to for it to be being reported as using a 'Fibre' interface?!

Link to comment
Share on other sites

I am currently trying to burn the exact same disk in my second drive now Its started out slow at first on burn now failed as well heres the log. Also trying a different disk to see if its a bad single disk problem.

 

I 15:13:23 ImgBurn Version 2.4.4.0 started!

I 15:13:23 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 15:13:23 Total Physical Memory: 2,094,924 KB - Available: 1,124,888 KB

I 15:13:23 Initialising SPTI...

I 15:13:23 Searching for SCSI / ATAPI devices...

I 15:13:25 Found 2 DVD

Link to comment
Share on other sites

Ok same problem on both my Samung driver heres both device info after media was supposedly burned and log when it was buring

 

device info

 

TSSTcorp CDDVDW SH-S223Q SB03 (Fibre)

Current Profile: DVD+R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,295,104

Free Space: 4,700,372,992 bytes

Free Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 4x, 6x, 8x, 12x, 16x, 18x, 20x

 

Physical Format Information (ADIP):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: MCC-004-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Performance (Write Speeds):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 5,540 KB/s (4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 8,310 KB/s (6x)

Descriptor 3...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 11,080 KB/s (8x)

Descriptor 4...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 16,620 KB/s (12x)

Descriptor 5...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 22,160 KB/s (16x)

Descriptor 6...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 24,930 KB/s (18x)

Descriptor 7...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 27,700 KB/s (20x)

 

log

 

I 15:26:08 Operation Started!

I 15:26:08 Building Image Tree...

I 15:26:11 Calculating Totals...

I 15:26:12 Preparing Image...

I 15:26:12 Contents: 2 Files, 1 Folder

I 15:26:12 Content Type: Data

I 15:26:12 File System(s): UDF (1.02)

I 15:26:12 Volume Label: 2010 (1984)

I 15:26:12 Size: 4,694,444,050 bytes

I 15:26:12 Sectors: 2,292,210

I 15:26:12 Image Size: 4,694,999,040 bytes

I 15:26:12 Image Sectors: 2,292,480

I 15:26:14 Operation Successfully Completed! - Duration: 00:00:05

I 15:26:14 Operation Started!

I 15:26:14 Source File: -==/\/[bUILD IMAGE]\/\==-

I 15:26:14 Source File Sectors: 2,292,480 (MODE1/2048)

I 15:26:14 Source File Size: 4,694,999,040 bytes

I 15:26:14 Source File Volume Identifier: 2010 (1984)

I 15:26:14 Source File Application Identifier: ImgBurn v2.4.4.0

I 15:26:14 Source File Implementation Identifier: ImgBurn

I 15:26:14 Source File File System(s): UDF (1.02)

I 15:26:14 Destination Device: [4:0:0] TSSTcorp CDDVDW SH-S223Q SB03 (Y:) (Fibre)

I 15:26:14 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x, 20x)

I 15:26:14 Destination Media Sectors: 2,295,104

I 15:26:14 Write Mode: DVD

I 15:26:14 Write Type: DAO

I 15:26:14 Write Speed: MAX

I 15:26:14 DVD+R Reserve Track: No

I 15:26:14 Link Size: Auto

I 15:26:14 Lock Volume: Yes

I 15:26:14 Test Mode: No

I 15:26:14 OPC: No

I 15:26:14 BURN-Proof: Enabled

I 15:26:14 Book Type Setting: DVD-ROM

I 15:26:14 Filling Buffer... (40 MB)

I 15:26:15 Writing LeadIn...

I 15:26:36 Writing Session 1 of 1... (1 Track, LBA: 0 - 2292479)

I 15:26:36 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2292479)

I 15:30:43 Synchronising Cache...

I 15:30:50 Closing Track...

I 15:30:53 Finalising Disc...

I 15:31:15 Exporting Graph Data...

I 15:31:15 Graph Data File: C:\Users\Techman\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223Q_SB03_SATURDAY-APRIL-11-2009_3-26_PM_MCC-004-00_MAX.ibg

I 15:31:15 Export Successfully Completed!

I 15:31:15 Operation Successfully Completed! - Duration: 00:05:00

I 15:31:15 Average Write Rate: 18,638 KB/s (13.5x) - Maximum Write Rate: 27,754 KB/s (20.0x)

I 15:31:15 Cycling Tray before Verify...

W 15:31:22 Waiting for device to become ready...

I 15:31:42 Device Ready!

I 15:31:42 Operation Started!

I 15:31:42 Source Device: [4:0:0] TSSTcorp CDDVDW SH-S223Q SB03 (Y:) (Fibre)

I 15:31:42 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x, 20x)

I 15:31:42 Image File: -==/\/[bUILD IMAGE]\/\==-

I 15:31:42 Image File Sectors: 2,292,480 (MODE1/2048)

I 15:31:42 Image File Size: 4,694,999,040 bytes

I 15:31:42 Image File Volume Identifier: 2010 (1984)

I 15:31:42 Image File Application Identifier: ImgBurn v2.4.4.0

I 15:31:42 Image File Implementation Identifier: ImgBurn

I 15:31:42 Image File File System(s): UDF (1.02)

I 15:31:42 Read Speed (Data/Audio): MAX / MAX

E 15:31:42 Session 1, Track 1 is smaller on the disc than it is in the image file.

E 15:31:42 Disc's Track Sectors: 0 (TOC Sectors: 0)

E 15:31:42 Image File's Track Sectors: 2292480 (TOC Sectors: 2292480)

E 15:31:46 Operation Failed! - Duration: 00:00:00

I 15:31:46 Average Verify Rate: N/A - Maximum Verify Rate: N/A

Link to comment
Share on other sites

Ok so now try slowing the burn down to 8x or 12x.

 

Have you tried other discs?

 

Do the discs you've just tried to burn actually look like they've been burnt on the bottom?

 

Do you have the latest nvidia nforce drivers installed? Whichever way you look at it, reporting 'Fibre' is just plain wrong.

Link to comment
Share on other sites

Ok an update to my situation I own a stack of 100 VerbatimDVD+R and CDRs YEA! which serve me well and waiting to try some 8x DVD+R DL media which I now use for mastering my data. I also have 350 Memorex DVD+R 16x and 100 Memorex DVD++R DL media boo! which I have no other recourse other that to use them or trash them so trying to see how fast I can burn these reliably.

 

Ok so now try slowing the burn down to 8x or 12x.

 

Have you tried other discs?

See above as the burn went fine with the Verbatim media

 

Do the discs you've just tried to burn actually look like they've been burnt on the bottom?

yes they do

 

Do you have the latest nvidia nforce drivers installed? Whichever way you look at it, reporting 'Fibre' is just plain wrong.

I have 15.23 driver which last I looked was fastest and most reliable.

 

I will now change the media speed on the Memorex 16 DVD+R to 12x and lower to 8x to see how that works. What speed is good for the Memorex DL media?

 

Device Info DL Media

SSTcorp CDDVDW SH-S223Q SB03 (Fibre)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 4,173,824

Free Space: 8,547,991,552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Supported Write Speeds: 4x, 6x, 8x

 

DVD

Link to comment
Share on other sites

I dont have any other drives that are SATA except samsung. I am now doing a test burn on an older computer to see how it works with Imgburn and Memorex media (will post results here) soon anyways heres the 12x burn info from same setup.......

 

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,295,104

Free Space: 4,700,372,992 bytes

Free Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 4x, 6x, 8x, 12x, 16x, 18x, 20x

 

Physical Format Information (ADIP):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: MCC-004-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Performance (Write Speeds):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 5,540 KB/s (4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 8,310 KB/s (6x)

Descriptor 3...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 11,080 KB/s (8x)

Descriptor 4...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 16,620 KB/s (12x)

Descriptor 5...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 22,160 KB/s (16x)

Descriptor 6...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 24,930 KB/s (18x)

Descriptor 7...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2295103 (0x0023053F)

-> RS: 22,160 KB/s (16x) - WS: 27,700 KB/s (20x)

 

Log File

 

I 16:18:12 ImgBurn Version 2.4.4.0 started!

I 16:18:12 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 16:18:12 Total Physical Memory: 2,094,924 KB - Available: 1,103,044 KB

I 16:18:12 Initialising SPTI...

I 16:18:12 Searching for SCSI / ATAPI devices...

I 16:18:12 Found 2 DVD

Link to comment
Share on other sites

I 16:57:27 Destination Device: [3:1:0] TSSTcorp CDDVDW SH-S223Q SB03 (X:) (Fibre)

I 16:57:27 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x, 20x)

I 16:57:27 Write Speed: 12x

I 17:11:55 Average Write Rate: 5,563 KB/s (4.0x) - Maximum Write Rate: 8,377 KB/s (6.0x)

That's strange: even though you've selected 12x the burner only reached 6x. Do you have Alcohol 120% or Daemon Tools installed? Have you installed the latest drivers for your motherboard's chipset? You should also check if you have the latest BIOS available for your motherboard model.

Link to comment
Share on other sites

The other computer says it burned ok but could not verify the media so let me post that log so I can test media with DVDInfoPro to see if it burned.

 

Log

I 18:13:37 ImgBurn Version 2.4.4.0 started!

I 18:13:37 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 18:13:37 Total Physical Memory: 1,047,380 KB - Available: 470,808 KB

I 18:13:37 Initialising SPTI...

I 18:13:37 Searching for SCSI / ATAPI devices...

I 18:13:37 Found 1 DVD-ROM, 1 DVD

Link to comment
Share on other sites

Heres the disk info before I start burning

 

LITE-ON DVDRW SOHW-1653S CS0T (ATA)

Current Profile: DVD+R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,295,104

Free Space: 4,700,372,992 bytes

Free Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 4x, 6x, 8x, 12x, 14x, 16x

 

Physical Format Information (ADIP):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Performance (Write Speeds):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 5,540 KB/s (4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 8,310 KB/s (6x)

Descriptor 3...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 11,080 KB/s (8x)

Descriptor 4...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 16,620 KB/s (12x)

Descriptor 5...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 19,390 KB/s (14x)

Descriptor 6...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 22,160 KB/s (16x)

Link to comment
Share on other sites

Successful burn at 8x barely let me check and post the 2 media code for memorex and verbatim media thought I saw something strange.

 

I 18:52:40 ImgBurn Version 2.4.4.0 started!

I 18:52:40 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 18:52:40 Total Physical Memory: 1,047,380 KB - Available: 463,988 KB

I 18:52:40 Initialising SPTI...

I 18:52:40 Searching for SCSI / ATAPI devices...

I 18:52:40 Found 1 DVD-ROM, 1 DVD

Link to comment
Share on other sites

This is the disk info I got reading the memorex media followed by verbatim media

 

Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 2,292,096

Size: 4,694,212,608 bytes

Time: 509:23:21 (MM:SS:FF)

Supported Write Speeds: 4x, 6x, 8x, 12x, 14x, 16x

 

TOC Information:

Session 1... (LBA: 0)

-> Track 01 (Mode 1, LBA: 0 - 2292095)

-> LeadOut (LBA: 2292096)

 

Physical Format Information (ADIP):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: MCC-004-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,488,703

Last Physical Sector in Layer 0: 0

 

Performance (Write Speeds):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2292095 (0x0022F97F)

-> RS: 11,064 KB/s (8x) - WS: 5,540 KB/s (4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2292095 (0x0022F97F)

-> RS: 11,064 KB/s (8x) - WS: 8,310 KB/s (6x)

Descriptor 3...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2292095 (0x0022F97F)

-> RS: 11,064 KB/s (8x) - WS: 11,080 KB/s (8x)

Descriptor 4...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2292095 (0x0022F97F)

-> RS: 11,064 KB/s (8x) - WS: 16,620 KB/s (12x)

Descriptor 5...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2292095 (0x0022F97F)

-> RS: 11,064 KB/s (8x) - WS: 19,390 KB/s (14x)

Descriptor 6...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2292095 (0x0022F97F)

-> RS: 11,064 KB/s (8x) - WS: 22,160 KB/s (16x)

 

Verbatim Media here

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,295,104

Free Space: 4,700,372,992 bytes

Free Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 4x, 6x, 8x, 12x, 14x, 16x

 

Physical Format Information (ADIP):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

 

Performance (Write Speeds):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 5,540 KB/s (4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 8,310 KB/s (6x)

Descriptor 3...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 11,080 KB/s (8x)

Descriptor 4...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 16,620 KB/s (12x)

Descriptor 5...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 19,390 KB/s (14x)

Descriptor 6...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 4,432 KB/s (3.3x) - WS: 22,160 KB/s (16x)

Link to comment
Share on other sites

Ok this is getting weird here is DVDInfoPro reading of blanks on my new system with each burner reading a blank

 

Memorex Media

 

Media Information

Region information N/A not a DVD-VIDEO

Media code/Manufacturer ID MCC 004

Media Product Revision Number 00h

Format Capacity Blank Disc

Free Blocks 405405696

Free Capacity 4.38GB/4.70GB

Book Type DVD-ROM

Media Type DVD+R

Manufacturer Rated Speed Unknown

Data area starting sector 30000h

Linear Density 0.267um/bit

Track Density 0.74um/track

Number of Layers 1

 

Complete Media Code

00000000 08 02 00 00 01 0F 02 00 00 03 00 00 00 26 05 3F .............&.?

00000010 00 00 00 00 00 00 07 4D 43 43 00 00 00 00 00 30 .......MCC.....0

00000020 30 34 00 38 23 54 37 12 02 54 6C 02 92 5F 15 15 04.8#T7..Tl.._..

00000030 0B 0B 08 08 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 ................

 

Verbatim Media

 

Media Information

Region information N/A not a DVD-VIDEO

Media code/Manufacturer ID MCC 004

Media Product Revision Number 00h

Format Capacity Blank Disc

Free Blocks 405405696

Free Capacity 4.38GB/4.70GB

Book Type DVD-ROM

Media Type DVD+R

Manufacturer Rated Speed Unknown

Data area starting sector 30000h

Linear Density 0.267um/bit

Track Density 0.74um/track

Number of Layers 1

 

Complete Media Code

00000000 08 02 00 00 01 0F 02 00 00 03 00 00 00 26 05 3F .............&.?

00000010 00 00 00 00 00 00 07 4D 43 43 00 00 00 00 00 30 .......MCC.....0

00000020 30 34 00 38 23 54 37 12 02 54 6C 02 92 5F 15 15 04.8#T7..Tl.._..

00000030 0B 0B 08 08 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 ................

Link to comment
Share on other sites

Well whats not funny is I thinking now when I decided to stock up and buy 500 of the memorex media I was using mid code be sure I was buying something that I tested that was working. I was using verbatim media at the time as well

Link to comment
Share on other sites

Just rechecked my supply 250 left now and all have same code from random checks on the stacks. I threw a ton of toasters away got tired saving them as memorex wanted me to ship back all the claimed defective disks for replacement. Also have about 80 DL memorex to test next. Think memorex would give me a replacement for all I believe I have all receipts? Think I would get back same media or something that will burn properly?

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.