Jump to content

leoliver

Members
  • Content Count

    21
  • Joined

  • Last visited

Everything posted by leoliver

  1. Does anyone know who the real manufacturer of my TSSTcorp DVD+-RW TS-H653A D300 drive that came on my Dell computer?
  2. Could some tell who makes the hp DVD-Ram GH40L SCSI Cd-Rom Device drive. It came on a Vista computer a Friend gave me. And I would like to burn my DVD+R discs as DVD-roms. So I need to change the advance settings for my drive. If my drive's manufacturer isn't listed, can use any of the other listed drive manufacturers , to burn DVD-roms. Thanks.
  3. Someone gave me a older computer with a Sony DVD RW DRU-510A drive. Can someone tell me who makes this Sony drive so I can use that info to set up the advanced settings. I have another Sony drive that you told me was a re-badgered Lite-on , but I now need some info on the DRU-510A drive also. Thanks.
  4. leoliver

    Who makes the Sony DVD RW DRU-510A drive ?

    http://club.myce.com/f61/sony-dru-500a-liteon-99560/ So is there no setting I can use in "advanced settings" for this drive ? I believe I need to have it registered , in "advance settings" so I change the book type to DVD-Rom .
  5. leoliver

    Verbatim DVD+R DL burn failure

    You were 100% correct about my drive needing a cleaning. I cleaned it with a " Maxell DVD Lens Cleaner " , and then I used another Verbatim DVD+R DL 2.4x disc , which then resulted in a successful burn . Problem solved. Sucessful_burn.log
  6. Hi Everyone, Today I was attempting to burn to a Verbatim DVD+R DL (Disc ID: MKM-001-00) . These are the recommended dual layer disc's for using with ImgBurn. I have successfully used these disc's in the past with both Nero and ImgBurn. And today was the first burn failure I've had with these disc's. It is also the first time I used the new ImgBurn 2.4.3.0 version on my Win XP Pro SP3 computer. I have had successful burns with #2.4.2.0 . And I un-installed that version with Revo uninstaller and deleted any leftover files from the prior version , before installing the latest version. One other issue was different with the failed burn, I changed my drive device ID from "SONY DVD RW DRU-720A_JY08" to "SONY DVD RW DRU-720A" so I could try and permanently change the book type settings. I made a previous post about this issue , see : http://forum.imgburn.com/index.php?showtopic=9791 . And as I described in that post , the old setting is still showing up in the ImgBurn "Device" window. I don't know if that problem was the cause of the burn failure or not. I do know that something went wrong with this burn that wasn't a issue in the past. I'm attaching the log with this post . It seems to say that the failure reason was "W 12:27:49 Failed to Write Sectors 992640 - 992671 - Reason: Invalid Address For Write " Feedback on this issue will be appreciated. Failure_04_05_09.log
  7. I re-entered the info in "advanced settings" ,and I did see the extra 2-rows you were referring to , in the Log file of my last successful burn.
  8. Hi Everyone, I have the latest ImgBurn version installed on my Win XP Pro SP3 computer. My DVD burner is a USB connected : " Drive OEM:Lite-On Drive ID String:SONY DVD RW DRU-720A_JY08 " And for every DVD write I have to manually change the book-type to DVD_ROM . When I attempt to permanently change the book type to DVD_Rom , by selecting "Drive (EEPROM!)" , I receive this error message : " unknown (failed) , Reason: No additional sense information . And when I do manually change the book type , it seems to revert back to normal before my next DVD burn. Which causes my burned DVDs to be the DVD+R book type when I auto use ImgBurn with DVD Fab. I have registered my DVD burner in the Advance settings , with Smart Burn enabled . But I would like some feedback on why ImgBurn won't allow me permanently change the book type to DVD_ROM when I burn DVDs with my SONY DVD RW DRU-720A_JY08 . Thanks!
  9. I changed this in the "advanced settings" , to SONY DVD RW DRU-720A and it is displayed there and also in the "destination " selection menu. But in the "device" window it still displays SONY DVD RW DRU-720A JY08 . I upgraded to version 2.4.3.0 , and tried to burn to a dual layer disc and the burn failed. Since that is a another issue I'll post a separate thread for that issue. But the Destination Device address was for " I 12:13:23 Destination Device: [0:0:0] SONY DVD RW DRU-720A JY08 (F:) (USB) " on the failed burn , and the failure was for this reason "W 12:27:49 Failed to Write Sectors 992640 - 992671 - Reason: Invalid Address For Write " . I'm wondering if the difference between the drive description in the advanced setting " SONY DVD RW DRU-720A" , and the drive description in the device window " SONY DVD RW DRU-720A JY08" could have caused this "Invalid Address For Write " error.
  10. Hi Everyone, I have a HL-DT-STCD-RW GCE-8481B ;C102 , 48X CD-RW recorder on my Win XP Pro SP3 computer. I would like to ask how I can tell who is the OEM of my CD-RW recorder ? I would like to know this so I can input the advance settings for the drive, so I can better burn Cd's with ImgBurn. Thanks.
  11. leoliver

    Use of disc verification

    Hi Everyone, Is the burned disc verification process more oriented to data DVD burns rather than video DVDs with .vob files? The reason I ask this is because I have successfuly burned DVD video disc , and then the post-burn verification process tells me that verification fails due to bad sectors. And yet often the same disc's , that failed verification will play flawlessly in a stand-alone DVD player. That has happened with both IMGBurn created video DVDs , and disc's burned with Nero. Which causes me too wonder if disc verification is a accurate measure of the quality of .vob files on a burned video DVD disc ?
  12. leoliver

    Use of disc verification

    Thanks for your reply. Too fast burn speed was probably the problem. One disc that failed verification was burned at the max (16x) , but normally I try to stick to 6x.
  13. leoliver

    Burn audio cds with IMGburn

    Hi Everyone, How would I burn a CD audio disc , that will playback(CDA files) on a stand alone CD player? Just load the files on the the project list in write mode , and burn ? And are there any advance settings for CD burn drives ? Mine is a HL-DT-STCD-RW GCE-8481B ;C102 which came on my Dell computer and still works great. My questions are "basic" , but since IMGBurn seems oriented towards DVDs , I thought I would ask about CD burning . Besides, I only have 2-blank audio CDs left , and I don't want to waste one ! And I think IMGburn is great ! I've only had IMGburn for about 3-weeks and I already like it more than Nero. Thanks.
  14. leoliver

    Burning BIN/CUE Images

    Hi Everyone, I have been searching the forum for this topic " Burning BIN/CUE Images" , and search didn't show any hits. I've only burned BIN/CUE Images with Nero Burning Rom a few times . And since I now have a 795 mb. bin file , which is video :MPEG-PES and Audio: MPEG Audio . With a 4.00KB CUE Image file . I want to burn these to a CD so I can watch it on my DVD player. I wanted to ask if IMGBurn can do this ? If so, what IMGBurn guide should I use to do this? I did find this guide "How to write an image file to a disc with IMGBurn" . But I'm not certain if that is for BIN/CUE Video Images . Feedback will be appreciated !
  15. Hi Everyone, I have a SONY DVD RW DRU-720A unit . I would like to set my DVD+ R disc's to DVD-ROM booktype, but I don't see any tab for Sony on the "change booktype" settings . To the best of my knowledge, Sony is the manufacoter of my burner. Thanks .
  16. Hi Everyone, 21 months ago I purchased a external USB connect SONY DVD RW DRU-720A burner. I usually burn with Nero 7 or sometimes DVD Fab Platinum . I burn to DVD 4.7 disc's with no problem. When I 1st purchased my Sony unit , I did once successfully burn to Verbatim DW+RW DL . Last week, I tried to burn to dual layer disc's again with Nero 7 . And I used Sony DW+RW DL disc's. That failed . So I updated my firmware to JY08 , purchased some Verbatim DW+RW DL disc's and tried to burn with Nero 7 . And that burn failed. After receiving some answers to forum posts, I made concerning my burn failures , I followed the advice I received and download & installed IMGBurn 2.4.2.0 . And this afternoon, I opened up IMGBurn and tried to set the book type to DVD_ROM . I couldn't find a setting for Sony , so I clicked OK and tried burning to Verbatim DW+RW DL disc's with IMGBurn . And my first IMGBurn failed , with Verbatim DW+RW DL disc's , just like it failed with Nero 7 . This is starting to get very frustrating and expensive . I've spent over $40.00 on, so-far , un-burnable DW+RW DL disc's . I went over some of the posts in this forum , and I see that other folks are successfully using IMGBurn, and a SONY DVD RW DRU-720A , to write on Verbatim DW+RW DL disc's . So why isn't it working for me ? I also cleaned the lens on my SONY DVD RW DRU-720A , but burn failures keep coming ! I would post a IMGBurn error log with this post , but I couldn't find one in the log file folder . But here is my filter drive load order : =============================================== Filter Driver Load Order - ImgBurn v2.4.2.0 =============================================== Upper Device Filter: redbook Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: PxHelp20 Lower Class Filter: AnyDVD Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\System32\DRIVERS\redbook.sys File Version: 5.1.2600.5512 (xpsp.080413-2108) File Description: Redbook Audio Filter Driver Product Name: Microsoft
  17. I found the log file which I'm attaching . ImgBurn.log
×

Important Information

By using this site, you agree to our Terms of Use.