lex415

I thought that was the log after the burn. Oh well. Thans for trying to help!

It just worked randomly. Here's the info, I didn't do anything different. LITE-ON DVDRW LH-18A1P GL0J (ATA) Current Profile: DVD+R DL Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 3,775,584 Size: 7,732,396,032 bytes Time: 839:03:09 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1,887,792 Changeable: No TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 3775583) -> LeadOut (LBA: 3775584) Disc Control Blocks Information: LITE-ON Physical Format Information (ADIP - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: RITEK-S04-66 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,084,399 Physical Format Information (Last Recorded - L1): Disc ID: RITEK-S04-66 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,084,399 Layer Information: Layer 0 Sectors: 1,887,792 (50%) Layer 1 Sectors: 1,887,792 (50%) Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3775583 (0x00399C5F) -> RS: 23,052 KB/s (17.1x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3775583 (0x00399C5F) -> RS: 23,052 KB/s (17.1x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3775583 (0x00399C5F) -> RS: 23,052 KB/s (17.1x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3775583 (0x00399C5F) -> RS: 23,052 KB/s (17.1x) - WS: 11,080 KB/s (8x)

PLEASE HELP!

Im more than sure i've been using 2.4, unless it says different in the log.

Update your burner's firmware and try again. I just updated it still nothing, also I got this: LITE-ON DVDRW LH-18A1P GL0J (ATA) Current Profile: DVD+R DL Disc Information: Status: Incomplete State of Last Session: Incomplete Erasable: No Sessions: 1 Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (Last Recorded - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 11,080 KB/s (8x) Whats weird is that before I updated, it started up normally which it has not been doing so far. Unfortunately it said something about calibration failing.

Hello all, this is my first post and I thank everyone in advance for reading and hopefully suggesting fixes. I recently read another post Disc Not Empty Pt. 1 and im having similar issues but I think the answer might be different. Im using a DVD+R DL [Memorex] disc to burn an .ISO file that's about 7.5 GBs. I also found this handy forum that helped me a little but not completely. It still reads "Disc Not Empty" and im not sure how to solve this. Any help would be great. LITE-ON DVDRW LH-18A1P GL0C (ATA) Current Profile: DVD+R DL Disc Information: Status: Incomplete State of Last Session: Incomplete Erasable: No Sessions: 1 Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 8,310 KB/s (6x) Descriptor 4... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 6,648 KB/s (4.9x) - WS: 11,080 KB/s (8x)