DeathStalker
-
Posts
50 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by DeathStalker
-
-
I just updated the firmware to v3.10 (honestly didn't expect there to be a new version of it). Also, uninstalled and re-installed ImgBurn to be safe after that. Will post the log the next time it fails. It doesn't fail ALL the time, but often enough to get expensive
-
I am using only branded Verbatim discs. It happens on all types - BD single/dual, DVD single/dual.
SCSIStatus: 0x02
Interpretation: Check Condition
SK Interpretation: Hardware Error
ASC/ASCQ Interpretation: Timeout on logical unit
Settings are ImgBurn default. ASUS BW-16D1HT (firmware v3.03) Win10x64 I have previously chalked this issue up to cheaper discs, but now Verbatims are blowing out (and they ate NOT cheap)
-
I've contacted the company about a possible bad batch.
But I'm also wondering about these error that I saw in the log -
W 01:19:05 Retrying (16 of 20)...W 01:19:50 Retry Failed - Reason: No Seek CompleteW 01:19:50 Retrying (17 of 20)...W 01:20:03 Retry Failed - Reason: Timeout on Logical UnitW 01:20:03 Retrying (18 of 20)...W 01:20:20 Retry Failed - Reason: Timeout on Logical UnitW 01:20:20 Retrying (19 of 20)...Not sure why either of those would occur. -
The Asus was recently rated as the best, most durable drive, which is why I got it over another LG. And yes, I got the VAST majority of the failures with the LG - I thought the LG might be dying, that's why I got the Asus. The Ritek discs are the BD50s and I only had one of those blow out - the one that had the error at 99% I tested and it played fine - it was the 12 BD25s of OTCBDR-002-000 that I had the issue with. I'm wondering if it was just a bad batch of discs. I've never had a problem with either before (on the LG) - maybe 1 or 2 discs, but that's it.
-
Here are several failed log entries - the first few have OPC enabled, the last one does not. I have not seen a difference in having it enabled vs not enabled. These logs are all using a brand new ASUS BW-16D1HT. My prior drive was an LG WH16NS40 - when I started b\getting the failures, I thought it might be that the drive was dying (had that happen before with DVD-RW drives, but the LG was my first BD-R drive). I have also tried BD-R Verify Not Required on and off, with no apparent difference. I've no idea how to switch Hardware Defect Management Active to Yes, or even what it does, or if it is necessary/advisable. You can see that I manually selected Retry several times (I've occasionally found success with that, but not in these cases).; //****************************************\\; ImgBurn Version 2.5.8.0 - Log; Sunday, 08 July 2018, 21:13:25; \\****************************************//;;I 19:46:10 ImgBurn Version 2.5.8.0 started!I 19:46:10 Microsoft Windows 8 Enterprise x64 Edition (6.2, Build 9200)I 19:46:10 Total Physical Memory: 67,017,672 KiB - Available: 47,095,424 KiBI 19:46:10 Initialising SPTI...I 19:46:10 Searching for SCSI / ATAPI devices...I 19:46:10 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)I 19:46:10 -> Drive 2 - Info: CyberLnk VirtualDrive 1.00 (X:) (SCSI)I 19:46:10 -> Drive 3 - Info: ASUS BW-16D1HT 3.03 (Y:) (SATA)I 19:46:10 Found 1 BD-ROM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE XL!I 19:46:35 Operation Started!I 19:46:35 Source File: C:\Temp\XXXXX.isoI 19:46:35 Source File Sectors: 11,715,296 (MODE1/2048)I 19:46:35 Source File Size: 23,992,926,208 bytesI 19:46:35 Source File Volume Identifier: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXI 19:46:35 Source File Volume Set Identifier: 4CE89D2400B2C269I 19:46:35 Source File Application Identifier: ImgBurn v2.5.8.0I 19:46:35 Source File Implementation Identifier: ImgBurnI 19:46:35 Source File File System(s): UDF (2.60)I 19:46:35 Destination Device: [0:0:0] ASUS BW-16D1HT 3.03 (Y:) (SATA)I 19:46:35 Destination Media Type: BD-R (Disc ID: OTCBDR-002-000)I 19:46:35 Destination Media Supported Write Speeds: 2x, 4x, 6xI 19:46:35 Destination Media Sectors: 12,219,392I 19:46:35 Write Mode: BDI 19:46:35 Write Type: DAOI 19:46:35 Write Speed: MAXI 19:46:35 Hardware Defect Management Active: NoI 19:46:35 BD-R Verify Not Required: NoI 19:46:35 Link Size: AutoI 19:46:35 Lock Volume: YesI 19:46:35 Test Mode: NoI 19:46:35 OPC: YesI 19:46:35 BURN-Proof: EnabledI 19:46:35 Write Speed Successfully Set! - Effective: 26,976 KB/s (6x)I 19:46:51 Filling Buffer... (80 MiB)I 19:46:51 Writing LeadIn...I 19:46:52 Writing Session 1 of 1... (1 Track, LBA: 0 - 11715295)I 19:46:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11715295)I 20:02:01 Synchronising Cache...I 20:02:04 Closing Track...I 20:02:05 Finalising Disc...I 20:02:27 Operation Successfully Completed! - Duration: 00:15:52I 20:02:27 Average Write Rate: 25,804 KiB/s (5.9x) - Maximum Write Rate: 26,750 KiB/s (6.1x)I 20:02:27 Cycling Tray before Verify...W 20:02:35 Waiting for device to become ready...I 20:02:47 Device Ready!I 20:02:49 Operation Started!I 20:02:49 Source Device: [0:0:0] ASUS BW-16D1HT 3.03 (Y:) (SATA)I 20:02:49 Source Media Type: BD-R (Disc ID: OTCBDR-002-000)I 20:02:49 Source Media Supported Read Speeds: 2x, 4x, 6x, 8x, 10x, 12xI 20:02:49 Source Media Supported Write Speeds: 2x, 4x, 6xI 20:02:49 Source Media Sectors: 11,715,296I 20:02:49 Source Media Size: 23,992,926,208 bytesI 20:02:49 Image File: C:\Temp\XXXXXXX.isoI 20:02:49 Image File Sectors: 11,715,296 (MODE1/2048)I 20:02:49 Image File Size: 23,992,926,208 bytesI 20:02:49 Image File Volume Identifier: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXI 20:02:49 Image File Volume Set Identifier: 4CE89D2400B2C269I 20:02:49 Image File Application Identifier: ImgBurn v2.5.8.0I 20:02:49 Image File Implementation Identifier: ImgBurnI 20:02:49 Image File File System(s): UDF (2.60)I 20:02:49 Read Speed (Data/Audio): MAX / MAXI 20:02:50 Read Speed - Effective: 5x - 12xI 20:02:50 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11715295)I 20:02:50 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11715295)W 20:04:43 Failed to Read Sectors 1236640 - 1236671 - Reason: L-EC Uncorrectable ErrorW 20:05:03 Failed to Read Sectors 1269152 - 1269183 - Reason: L-EC Uncorrectable ErrorW 20:05:07 Failed to Read Sector 1269152 - Reason: L-EC Uncorrectable ErrorW 20:05:07 Sector 1269152 maps to File: \BDMV\STREAM\00000.m2tsW 20:05:25 Retrying (1)...I 20:05:26 Verifying Sectors...W 20:05:33 Failed to Read Sectors 1270144 - 1270175 - Reason: L-EC Uncorrectable ErrorW 20:05:36 Failed to Read Sector 1270144 - Reason: L-EC Uncorrectable ErrorW 20:05:36 Sector 1270144 maps to File: \BDMV\STREAM\00000.m2tsW 20:05:38 Retrying (1)...I 20:05:40 Verifying Sectors...W 20:05:44 Failed to Read Sectors 1270400 - 1270431 - Reason: L-EC Uncorrectable ErrorW 20:05:47 Failed to Read Sector 1270400 - Reason: L-EC Uncorrectable ErrorW 20:05:47 Sector 1270400 maps to File: \BDMV\STREAM\00000.m2tsW 20:05:49 Retrying (1)...I 20:05:49 Verifying Sectors...W 20:05:57 Failed to Read Sectors 1284768 - 1284799 - Reason: L-EC Uncorrectable ErrorW 20:06:01 Failed to Read Sector 1284768 - Reason: L-EC Uncorrectable ErrorW 20:06:01 Sector 1284768 maps to File: \BDMV\STREAM\00000.m2tsW 20:06:02 Retrying (1)...I 20:06:02 Verifying Sectors...W 20:06:06 Failed to Read Sectors 1285184 - 1285215 - Reason: L-EC Uncorrectable ErrorW 20:06:09 Failed to Read Sector 1285184 - Reason: L-EC Uncorrectable ErrorW 20:06:09 Sector 1285184 maps to File: \BDMV\STREAM\00000.m2tsW 20:06:10 Retrying (1)...I 20:06:12 Verifying Sectors...W 20:06:28 Failed to Read Sectors 1291136 - 1291167 - Reason: L-EC Uncorrectable ErrorW 20:06:32 Failed to Read Sector 1291136 - Reason: L-EC Uncorrectable ErrorW 20:06:32 Sector 1291136 maps to File: \BDMV\STREAM\00000.m2tsW 20:06:33 Retrying (1)...I 20:06:36 Verifying Sectors...W 20:06:40 Failed to Read Sectors 1291968 - 1291999 - Reason: L-EC Uncorrectable ErrorW 20:06:44 Failed to Read Sector 1291968 - Reason: L-EC Uncorrectable ErrorW 20:06:44 Sector 1291968 maps to File: \BDMV\STREAM\00000.m2tsW 20:06:45 Retrying (1)...I 20:06:46 Verifying Sectors...W 20:06:50 Failed to Read Sectors 1293696 - 1293727 - Reason: L-EC Uncorrectable ErrorW 20:06:53 Failed to Read Sector 1293696 - Reason: L-EC Uncorrectable ErrorW 20:06:54 Sector 1293696 maps to File: \BDMV\STREAM\00000.m2tsW 20:06:54 Retrying (1)...W 20:06:58 Retry Failed - Reason: L-EC Uncorrectable ErrorW 20:06:59 Retrying (2)...W 20:07:03 Retry Failed - Reason: L-EC Uncorrectable ErrorW 20:07:03 Retrying (3)...I 20:07:04 Verifying Sectors...W 20:07:11 Failed to Read Sectors 1294528 - 1294559 - Reason: L-EC Uncorrectable ErrorW 20:07:15 Failed to Read Sectors 1295104 - 1295135 - Reason: L-EC Uncorrectable ErrorW 20:07:19 Failed to Read Sectors 1295264 - 1295295 - Reason: L-EC Uncorrectable ErrorW 20:07:22 Failed to Read Sector 1295264 - Reason: L-EC Uncorrectable ErrorW 20:07:22 Sector 1295264 maps to File: \BDMV\STREAM\00000.m2tsW 20:07:23 Retrying (1)...W 20:07:27 Retry Failed - Reason: L-EC Uncorrectable ErrorW 20:07:28 Retrying (2)...I 20:07:28 Verifying Sectors...W 20:07:36 Failed to Read Sectors 1295840 - 1295871 - Reason: L-EC Uncorrectable ErrorW 20:07:41 Failed to Read Sectors 1295936 - 1295967 - Reason: L-EC Uncorrectable ErrorW 20:07:45 Failed to Read Sectors 1296672 - 1296703 - Reason: L-EC Uncorrectable ErrorW 20:07:48 Failed to Read Sector 1296672 - Reason: L-EC Uncorrectable ErrorW 20:07:48 Sector 1296672 maps to File: \BDMV\STREAM\00000.m2tsW 20:07:49 Retrying (1)...W 20:07:53 Retry Failed - Reason: L-EC Uncorrectable ErrorW 20:07:54 Retrying (2)...I 20:07:55 Verifying Sectors...W 20:07:59 Failed to Read Sectors 1296768 - 1296799 - Reason: L-EC Uncorrectable ErrorW 20:08:09 Failed to Read Sectors 1299744 - 1299775 - Reason: L-EC Uncorrectable ErrorW 20:08:13 Failed to Read Sector 1299744 - Reason: L-EC Uncorrectable ErrorW 20:08:13 Sector 1299744 maps to File: \BDMV\STREAM\00000.m2tsW 20:08:17 Retrying (1)...I 20:08:18 Verifying Sectors...W 20:08:21 Failed to Read Sectors 1300064 - 1300095 - Reason: L-EC Uncorrectable ErrorW 20:08:26 Failed to Read Sectors 1300160 - 1300191 - Reason: L-EC Uncorrectable ErrorW 20:08:31 Failed to Read Sectors 1300480 - 1300511 - Reason: L-EC Uncorrectable ErrorW 20:08:35 Failed to Read Sector 1300480 - Reason: L-EC Uncorrectable ErrorW 20:08:35 Sector 1300480 maps to File: \BDMV\STREAM\00000.m2tsE 20:08:36 Failed to Read Sector 1300480 - Reason: L-EC Uncorrectable ErrorE 20:08:36 Sector 1300480 maps to File: \BDMV\STREAM\00000.m2tsE 20:08:36 Failed to Verify Sectors!E 20:08:40 Operation Failed! - Duration: 00:05:47; //****************************************\\; ImgBurn Version 2.5.8.0 - Log; Monday, 09 July 2018, 00:15:37; \\****************************************//;;I 22:59:03 ImgBurn Version 2.5.8.0 started!I 22:59:03 Microsoft Windows 8 Enterprise x64 Edition (6.2, Build 9200)I 22:59:03 Total Physical Memory: 67,017,672 KiB - Available: 45,676,144 KiBI 22:59:03 Initialising SPTI...I 22:59:03 Searching for SCSI / ATAPI devices...I 22:59:03 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)I 22:59:03 -> Drive 2 - Info: CyberLnk VirtualDrive 1.00 (X:) (SCSI)I 22:59:03 -> Drive 3 - Info: ASUS BW-16D1HT 3.03 (Y:) (SATA)I 22:59:03 Found 1 BD-ROM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE XL!I 22:59:04 Operation Started!I 22:59:04 Source File: C:\Temp\XXXXXXXXXX.isoI 22:59:04 Source File Sectors: 23,768,384 (MODE1/2048)I 22:59:04 Source File Size: 48,677,650,432 bytesI 22:59:04 Source File Volume Identifier: XXXXXXXXXXXXXXXXXI 22:59:04 Source File Volume Set Identifier: 4CE8B665016AAC41I 22:59:04 Source File Application Identifier: ImgBurn v2.5.8.0I 22:59:04 Source File Implementation Identifier: ImgBurnI 22:59:04 Source File File System(s): UDF (2.60)I 22:59:04 Destination Device: [0:0:0] ASUS BW-16D1HT 3.03 (Y:) (SATA)I 22:59:04 Destination Media Type: BD-R (Disc ID: RITEK-DR3-000)I 22:59:04 Destination Media Supported Write Speeds: 2x, 4x, 6xI 22:59:04 Destination Media Sectors: 24,438,784I 22:59:04 Write Mode: BDI 22:59:04 Write Type: DAOI 22:59:04 Write Speed: MAXI 22:59:04 Hardware Defect Management Active: NoI 22:59:04 BD-R Verify Not Required: NoI 22:59:04 Link Size: AutoI 22:59:04 Lock Volume: YesI 22:59:04 Test Mode: NoI 22:59:04 OPC: YesI 22:59:04 BURN-Proof: EnabledI 22:59:07 Write Speed Successfully Set! - Effective: 26,976 KB/s (6x)I 22:59:33 Filling Buffer... (80 MiB)I 22:59:34 Writing LeadIn...I 22:59:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 23768383)I 22:59:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 23768383)I 22:59:35 Writing Layer 0... (LBA: 0 - 12219391)I 23:15:17 Writing Layer 1... (LBA: 12219392 - 23768383)I 23:30:04 Synchronising Cache...I 23:30:05 Closing Track...I 23:30:06 Finalising Disc...I 23:30:42 Operation Successfully Completed! - Duration: 00:31:37I 23:30:42 Average Write Rate: 25,990 KiB/s (5.9x) - Maximum Write Rate: 26,757 KiB/s (6.1x)I 23:30:42 Cycling Tray before Verify...W 23:30:50 Waiting for device to become ready...I 23:31:05 Device Ready!I 23:31:08 Operation Started!I 23:31:08 Source Device: [0:0:0] ASUS BW-16D1HT 3.03 (Y:) (SATA)I 23:31:08 Source Media Type: BD-R (Disc ID: RITEK-DR3-000)I 23:31:08 Source Media Supported Read Speeds: 2x, 4x, 6x, 8xI 23:31:08 Source Media Supported Write Speeds: 2x, 4x, 6xI 23:31:08 Source Media Sectors: 23,768,384I 23:31:08 Source Media Size: 48,677,650,432 bytesI 23:31:08 Image File: C:\Temp\XXXXXX.isoI 23:31:08 Image File Sectors: 23,768,384 (MODE1/2048)I 23:31:08 Image File Size: 48,677,650,432 bytesI 23:31:08 Image File Volume Identifier: XXXXXXXXXXXXXXXXXXXXXXXXXXI 23:31:09 Image File Volume Set Identifier: 4CE8B665016AAC41I 23:31:09 Image File Application Identifier: ImgBurn v2.5.8.0I 23:31:09 Image File Implementation Identifier: ImgBurnI 23:31:09 Image File File System(s): UDF (2.60)I 23:31:09 Read Speed (Data/Audio): MAX / MAXI 23:31:10 Read Speed - Effective: 3x - 8x, 8x - 3xI 23:31:10 Verifying Session 1 of 1... (1 Track, LBA: 0 - 23768383)I 23:31:10 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 23768383)I 23:31:10 Verifying Layer 0... (LBA: 0 - 12219391)I 23:47:13 Verifying Layer 1... (LBA: 12219392 - 23768383)W 00:01:06 Failed to Read Sectors 23388960 - 23388991 - Reason: L-EC Uncorrectable ErrorW 00:01:09 Failed to Read Sector 23388960 - Reason: L-EC Uncorrectable ErrorW 00:01:09 Sector 23388960 maps to File: \BDMV\STREAM\00029.m2tsW 00:01:10 Retrying (1)...W 00:01:14 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:01:17 Retrying (2)...W 00:01:23 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:01:24 Retrying (3)...W 00:01:29 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:01:29 Retrying (4)...W 00:01:34 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:01:34 Retrying (5)...W 00:01:39 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:01:39 Retrying (6)...W 00:01:44 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:01:45 Retrying (7)...W 00:01:49 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:01:49 Retrying (8)...W 00:01:54 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:01:55 Retrying (9)...W 00:01:59 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:02:00 Retrying (10)...W 00:02:04 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:04:11 Retrying (11)...W 00:04:18 Retry Failed - Reason: L-EC Uncorrectable ErrorW 00:04:20 Retrying (12)...W 00:04:24 Retry Failed - Reason: L-EC Uncorrectable ErrorE 00:04:28 Failed to Read Sector 23388960 - Reason: L-EC Uncorrectable ErrorE 00:04:28 Sector 23388960 maps to File: \BDMV\STREAM\00029.m2tsE 00:04:28 Failed to Verify Sectors!E 00:04:33 Operation Failed! - Duration: 00:33:20I 00:04:33 Average Verify Rate: 23,412 KiB/s (5.3x) - Maximum Verify Rate: 36,191 KiB/s (8.2x)I 00:15:37 Close Request AcknowledgedI 00:15:37 Closing Down...I 00:15:37 Shutting down SPTI...I 00:15:37 ImgBurn closed!; //****************************************\\; ImgBurn Version 2.5.8.0 - Log; Monday, 09 July 2018, 08:02:44; \\****************************************//;;I 00:15:48 ImgBurn Version 2.5.8.0 started!I 00:15:48 Microsoft Windows 8 Enterprise x64 Edition (6.2, Build 9200)I 00:15:48 Total Physical Memory: 67,017,672 KiB - Available: 44,941,408 KiBI 00:15:48 Initialising SPTI...I 00:15:48 Searching for SCSI / ATAPI devices...I 00:15:48 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)I 00:15:48 -> Drive 2 - Info: CyberLnk VirtualDrive 1.00 (X:) (SCSI)I 00:15:48 -> Drive 3 - Info: ASUS BW-16D1HT 3.03 (Y:) (SATA)I 00:15:48 Found 1 BD-ROM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE XL!I 00:15:59 Operation Started!I 00:15:59 Source File: C:\Temp\XXXXXXXXXXXXXXXX.isoI 00:15:59 Source File Sectors: 23,768,384 (MODE1/2048)I 00:15:59 Source File Size: 48,677,650,432 bytesI 00:15:59 Source File Volume Identifier: XXXXXXXXXXXXXCCCCCI 00:15:59 Source File Volume Set Identifier: 4CE8B665016AAC41I 00:15:59 Source File Application Identifier: ImgBurn v2.5.8.0I 00:15:59 Source File Implementation Identifier: ImgBurnI 00:15:59 Source File File System(s): UDF (2.60)I 00:15:59 Destination Device: [0:0:0] ASUS BW-16D1HT 3.03 (Y:) (SATA)I 00:15:59 Destination Media Type: BD-R (Disc ID: RITEK-DR3-000)I 00:15:59 Destination Media Supported Write Speeds: 2x, 4x, 6xI 00:15:59 Destination Media Sectors: 24,438,784I 00:15:59 Write Mode: BDI 00:15:59 Write Type: DAOI 00:15:59 Write Speed: MAXI 00:15:59 Hardware Defect Management Active: NoI 00:15:59 BD-R Verify Not Required: NoI 00:15:59 Link Size: AutoI 00:15:59 Lock Volume: YesI 00:15:59 Test Mode: NoI 00:15:59 OPC: NoI 00:15:59 BURN-Proof: EnabledI 00:16:02 Write Speed Successfully Set! - Effective: 26,976 KB/s (6x)I 00:16:29 Filling Buffer... (80 MiB)I 00:16:30 Writing LeadIn...I 00:16:31 Writing Session 1 of 1... (1 Track, LBA: 0 - 23768383)I 00:16:31 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 23768383)I 00:16:31 Writing Layer 0... (LBA: 0 - 12219391)I 00:32:13 Writing Layer 1... (LBA: 12219392 - 23768383)I 00:47:00 Synchronising Cache...I 00:47:01 Closing Track...I 00:47:02 Finalising Disc...I 00:47:17 Operation Successfully Completed! - Duration: 00:31:18I 00:47:17 Average Write Rate: 25,990 KiB/s (5.9x) - Maximum Write Rate: 26,757 KiB/s (6.1x)I 00:47:17 Cycling Tray before Verify...W 00:47:26 Waiting for device to become ready...I 00:47:47 Device Ready!I 00:47:51 Operation Started!I 00:47:51 Source Device: [0:0:0] ASUS BW-16D1HT 3.03 (Y:) (SATA)I 00:47:51 Source Media Type: BD-R (Disc ID: RITEK-DR3-000)I 00:47:51 Source Media Supported Read Speeds: 2x, 4x, 6x, 8xI 00:47:51 Source Media Supported Write Speeds: 2x, 4x, 6xI 00:47:51 Source Media Sectors: 23,768,384I 00:47:51 Source Media Size: 48,677,650,432 bytesI 00:47:51 Image File: C:\Temp\XXXXXXXXXXXXXX.isoI 00:47:51 Image File Sectors: 23,768,384 (MODE1/2048)I 00:47:51 Image File Size: 48,677,650,432 bytesI 00:47:51 Image File Volume Identifier: XXXXXXXXXXXXXXXXXXXXXXXXXXXXI 00:47:51 Image File Volume Set Identifier: 4CE8B665016AAC41I 00:47:51 Image File Application Identifier: ImgBurn v2.5.8.0I 00:47:51 Image File Implementation Identifier: ImgBurnI 00:47:51 Image File File System(s): UDF (2.60)I 00:47:51 Read Speed (Data/Audio): MAX / MAXI 00:47:51 Hardware Read Error Retries: 20I 00:47:52 Read Speed - Effective: 3x - 8x, 8x - 3xI 00:47:52 Verifying Session 1 of 1... (1 Track, LBA: 0 - 23768383)I 00:47:52 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 23768383)I 00:47:52 Verifying Layer 0... (LBA: 0 - 12219391)I 01:03:56 Verifying Layer 1... (LBA: 12219392 - 23768383)W 01:17:49 Failed to Read Sectors 23388544 - 23388575 - Reason: L-EC Uncorrectable ErrorW 01:17:53 Failed to Read Sector 23388544 - Reason: L-EC Uncorrectable ErrorW 01:17:53 Sector 23388544 maps to File: \BDMV\STREAM\00029.m2tsW 01:17:53 Retrying (1 of 20)...W 01:17:58 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:17:58 Retrying (2 of 20)...W 01:18:04 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:04 Retrying (3 of 20)...W 01:18:08 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:08 Retrying (4 of 20)...W 01:18:13 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:13 Retrying (5 of 20)...W 01:18:17 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:17 Retrying (6 of 20)...W 01:18:21 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:22 Retrying (7 of 20)...W 01:18:26 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:26 Retrying (8 of 20)...W 01:18:30 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:30 Retrying (9 of 20)...W 01:18:34 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:34 Retrying (10 of 20)...W 01:18:39 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:39 Retrying (11 of 20)...W 01:18:43 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:43 Retrying (12 of 20)...W 01:18:48 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:48 Retrying (13 of 20)...W 01:18:52 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:52 Retrying (14 of 20)...W 01:18:58 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:18:58 Retrying (15 of 20)...W 01:19:05 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:19:05 Retrying (16 of 20)...W 01:19:50 Retry Failed - Reason: No Seek CompleteW 01:19:50 Retrying (17 of 20)...W 01:20:03 Retry Failed - Reason: Timeout on Logical UnitW 01:20:03 Retrying (18 of 20)...W 01:20:20 Retry Failed - Reason: Timeout on Logical UnitW 01:20:20 Retrying (19 of 20)...W 01:20:25 Retry Failed - Reason: L-EC Uncorrectable ErrorW 01:20:25 Retrying (20 of 20)...W 01:20:30 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:47:35 Retrying (21)...W 07:47:42 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:47:43 Retrying (22)...W 07:47:48 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:47:51 Retrying (23)...W 07:47:56 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:47:56 Retrying (24)...W 07:48:22 Retry Failed - Reason: Timeout on Logical UnitW 07:48:23 Retrying (25)...W 07:48:48 Retry Failed - Reason: Timeout on Logical UnitW 07:48:49 Retrying (26)...W 07:48:54 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:48:56 Retrying (27)...W 07:49:05 Retry Failed - Reason: Timeout on Logical UnitW 07:49:08 Retrying (28)...W 07:49:12 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:50:31 Retrying (29)...W 07:50:35 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:50:38 Retrying (30)...W 07:50:43 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:50:43 Retrying (31)...W 07:50:48 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:50:49 Retrying (32)...W 07:50:53 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:50:54 Retrying (33)...W 07:51:03 Retry Failed - Reason: Timeout on Logical UnitW 07:51:04 Retrying (34)...W 07:51:08 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:51:08 Retrying (35)...W 07:51:13 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:58:36 Retrying (36)...W 07:58:43 Retry Failed - Reason: L-EC Uncorrectable ErrorW 07:58:45 Retrying (37)...W 07:58:49 Retry Failed - Reason: L-EC Uncorrectable ErrorW 08:00:22 Device Removal Detected!W 08:00:22 The device list will be refreshed at the next available opportunity.W 08:01:58 Retrying (38)...W 08:02:03 Retry Failed - Reason: L-EC Uncorrectable ErrorW 08:02:05 Retrying (39)...W 08:02:09 Retry Failed - Reason: L-EC Uncorrectable ErrorW 08:02:10 Retrying (40)...W 08:02:15 Retry Failed - Reason: L-EC Uncorrectable ErrorE 08:02:17 Failed to Read Sector 23388544 - Reason: L-EC Uncorrectable ErrorE 08:02:17 Sector 23388544 maps to File: \BDMV\STREAM\00029.m2tsE 08:02:17 Failed to Verify Sectors!E 08:02:21 Operation Failed! - Duration: 07:14:25I 08:02:21 Average Verify Rate: 1,794 KiB/s (0.4x) - Maximum Verify Rate: 36,205 KiB/s (8.2x)I 08:02:22 Searching for SCSI / ATAPI devices...I 08:02:22 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (V:) (SCSI)I 08:02:22 -> Drive 2 - Info: CyberLnk VirtualDrive 1.00 (X:) (SCSI)I 08:02:22 Found 1 BD-ROM and 1 BD-ROM/HD DVD-ROM!I 08:02:44 Close Request AcknowledgedI 08:02:44 Closing Down...I 08:02:44 Shutting down SPTI...I 08:02:44 ImgBurn closed!
-
The next one that fails I will post the full log
-
Greettings all!
I am using quality BD discs (Quantum Optical), and have never had an issue until recently. I though my burner was going bad, so I ordered a new one - but the errors continue (this is on VERIFY, not burn!)
I/O Error!
ScsiStatus: 0x02
Interpretation: Check Condition
CBD: 28 00 01 64 E1 80 00 00 01 00
Interpretation Read(10) - Sector 23388544
Sense Area: 70 00 03 00 00 00 00 DA 00 00 00 00 11 50 00 00 00 00
Sk Interpretation: Medium Error
ASC/ASCQ Interpretation: L-EC Uncorrectable Error
It's getting ridiculous and wasting me a LOT of money. Please help!
Could this be the SATA cable?
I had a BD50 blow out at 99%!!!
=====================================
I just checked the file that didn't verify and it played perfectly fine. WTH is going on???!!!!
*I should add that the SATA cable is a Monoprice cable, so not a no-name brand.
**I have also tried with OPC on and off - it doesn't seem to make a difference. Win10x64 current Insider build.
-
Aww cr@p - was hoping that much could be squeezed on - sucks that BDs and DVDs won't overburn at all.
-
A whopping 23,872 MiB size vs 23,866 MiB disc size - will this 6 MiB end up getting truncated, or is there ANY margin for overburning on a BD?
Thanks!
-
Greetings!
I have a Samsung SH-224DB (SB01) drive and am attempting to burn 2,305,344 Sectors (4502MiB) to 2,298,496 Sectors (4489MiB)
I get the following error -
Failed to Reserve Track! - Reason: Invalid Field in CDBIs there a setting I can change to allow this or is this simply beyond any overburn amount? I would have expected to be able to overburn that slight amount.Thanks! -
Well, I set things back to default and it's working - guess I'll have to leave it as-is (I like to have the larger buffers).
-
Yes, the buffer size *does* change with the slider.
Additionally, this *only* happens when I try to burn files/folders directly, if they are from an ISO/MDS file, then they burn fine.
There appears to be nothing related to my issue when [g]-ing "virtualalloc failed" - I am not a coder
-
That is the exact error.
Selecting Build>Burn (ISO/Joliet/UDF) - single layer
It goes from -
VirtualAlloc Failed!
Reason: Not enough storage is available to process this command.
Hit OK
Failed to initialise FIFO Buffer (<amount of IO buffer selected>)
-
Ok, this is really starting to p*** me off.
I've had this working just fine, but had to re-install Win 7 x64. I have 32gb RAM and a 200gb pagefile - no matter what I set the IO Buffer to be (even as low as 128mb!) it is not working and I get the same error every time I try to burn.
It is CLEARLY *NOT* and issue with insufficient memory - Physical Memory shows 33,493,780 with 21,584,285 available (per Process Explorer). I have even tried different Interface selections, but nothing changes. It is also being run under Admin.
Please assist. ImgBurn is the only burner software that I am aware of that does Verify, so I don't want to have to switch to another.
Thank you!
-
Well clearly there is SOME option that allows the tray to be locked, but the drive to be "seen" - not like I'm making this stuff up for fun
-
IMHO, there is a difference between locking the drive, and making the drive "invisible" and forcing a manual search. Once the burn is completed, that should automatically release the drive to the other instances - one should not have to manually search for the drive each time.
-
What I'm saying, is that I WAS able to do that previously, with no problem. I *never* had to manually search for the drive - ever.
-
Ok, I just re-installed Windows 7 and now I can't get multiple instances of ImgBurn ready to roll - well, I can have multiple instances OPEN, but none but the first will see the drive. I get -
This drive is currently locked for exclusive access by 'ImgBurn v2.5.8.0 - PID: 13524'.Device->Initialise() Failed!Device: [0:2:0] DVD-RW (X:) (ATAPI)This drive will not be visible in the program.Now I previously did not have this problem - I could get several instances of ImgBurn ready to burn, just awaiting the switching of discs - now I have to manually Search for devices each timeThanks for any help! -
Update the firmware on the Liteon to HL0F.
Where can I get that firmware please?
-
Ok, so I even tried both the Plextor and the LiteOn iHAS124W - BOTH blew out the discs, and this was after I uninstalled and re-installed ImgBurn and set everything to default.
I tried running KProbe on the last fail and it basically stopped right after it started with only this info -
Date : 1/25/2014 5:19:37 PMModel : 5-2-0-0 N:ATAPI iHAS124 W HL05Disc : DVD+R DL , MBIPG101R10 [Moser Baer India Limited]Speed : MaxECC blocks sum (PI/PIF) : 8/1Scanned range : 0 - 00:02:00 (0)Sampling count : 0Errors : 1PI Max : 0PI Average : 0.0PI Total : 0PIF Max : 0PIF Average : 0.0PIF Total : 0Here's the log info from this one -I 02:27:51 Destination Device: [5:0:0] ATAPI iHAS124 W HL05 (N:) (SATA)I 02:27:51 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65)I 02:27:51 Destination Media Supported Write Speeds: 4x, 6x, 8xI 02:27:51 Destination Media Sectors: 4,173,824I 02:27:51 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)I 02:27:52 Write Mode: DVDI 02:27:52 Write Type: DAOI 02:27:52 Write Speed: 4xI 02:27:52 DVD+R DL Reserve Track: NoI 02:27:52 Link Size: AutoI 02:27:52 Lock Volume: YesI 02:27:52 Test Mode: NoI 02:27:52 OPC: NoI 02:27:52 BURN-Proof: EnabledI 02:27:52 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)I 02:27:52 Book Type Setting: DVD-ROMI 02:27:52 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: YesI 02:27:52 CD/DVD Life Record Count: 5 - CD/DVD Record Count: 3I 02:27:52 Optimal L0 Data Zone Capacity: 1,903,184I 02:27:52 Optimal L0 Data Zone Method: Copied From Original DiscI 02:27:57 Set L0 Data Zone Capacity Succeeded!I 02:27:57 L0 Data Zone Capacity - Effective: 1,903,184I 02:27:57 Filling Buffer... (80 MiB)I 02:27:57 Writing LeadIn...I 02:28:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 3712703)I 02:28:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3712703)I 02:28:01 Writing Layer 0... (LBA: 0 - 1903183)I 02:39:59 Writing Layer 1... (LBA: 1903184 - 3712703)W 02:43:30 Failed to Write Sectors 2429296 - 2429327 - Reason: Write ErrorW 02:43:30 Retrying (1 of 20)...W 02:43:30 Retry Failed - Reason: Write ErrorW 02:43:30 Retrying (2 of 20)...W 02:43:31 Retry Failed - Reason: Write ErrorW 02:43:31 Retrying (3 of 20)...W 02:43:31 Retry Failed - Reason: Write ErrorW 02:43:31 Retrying (4 of 20)...W 02:43:32 Retry Failed - Reason: Write ErrorW 02:43:32 Retrying (5 of 20)...W 02:43:32 Retry Failed - Reason: Write ErrorW 02:43:32 Retrying (6 of 20)...W 02:43:33 Retry Failed - Reason: Write ErrorW 02:43:33 Retrying (7 of 20)...W 02:43:33 Retry Failed - Reason: Write ErrorW 02:43:33 Retrying (8 of 20)...W 02:43:34 Retry Failed - Reason: Write ErrorW 02:43:34 Retrying (9 of 20)...W 02:43:34 Retry Failed - Reason: Write ErrorW 02:43:34 Retrying (10 of 20)...W 02:43:34 Retry Failed - Reason: Write ErrorW 02:43:35 Retrying (11 of 20)...W 02:43:35 Retry Failed - Reason: Write ErrorW 02:43:35 Retrying (12 of 20)...W 02:43:35 Retry Failed - Reason: Write ErrorW 02:43:35 Retrying (13 of 20)...W 02:43:36 Retry Failed - Reason: Write ErrorW 02:43:36 Retrying (14 of 20)...W 02:43:36 Retry Failed - Reason: Write ErrorW 02:43:36 Retrying (15 of 20)...W 02:43:37 Retry Failed - Reason: Write ErrorW 02:43:37 Retrying (16 of 20)...W 02:43:37 Retry Failed - Reason: Write ErrorW 02:43:37 Retrying (17 of 20)...W 02:43:38 Retry Failed - Reason: Write ErrorW 02:43:38 Retrying (18 of 20)...W 02:43:38 Retry Failed - Reason: Write ErrorW 02:43:38 Retrying (19 of 20)...W 02:43:39 Retry Failed - Reason: Write ErrorW 02:43:39 Retrying (20 of 20)...W 02:43:39 Retry Failed - Reason: Write ErrorE 10:36:55 Failed to Write Sectors 2429296 - 2429327 - Reason: Write Error -
I don't know, never tried it. I guess I'll re-install it and give it a try.
-
LOL - simple to *you*, because you're the EXPERT
-
Ok, still kind of odd to me - it would seem it's just "ignoring" hardware errors if it's turned off ..... ?
What's stranger is that, having it set to begin with, as I said, the drives seem to start having problems after a few months of use .....
-
Ummm, sorry for being stone-dumb, but I'm still confused. If the options don't change how the burn is done, and with them on it generates errors, doesn't turning them off just not notify you of those errors? It would *still* be a bad burn, but you wouldn't know it.
Not sure how that distinguishes ImgBurn from all the other burner software that *doesn't* have a Verify option.
Thanks.
And no, I'm not spending the exorbitant $$$ for the MKM discs (at an average of $1.00US/disc, I can blow out 5 of these and STILL be saving money!)
W 17:28:57 Failed to Read Sector XXXXXXX - Reason: Timeout on Logical Unit
in ImgBurn Support
Posted
Ok, tried it again on an Optical Quantum disc this time - it blew out
I 18:11:52 ImgBurn Version 2.5.8.0 started!
I 18:11:52 Microsoft Windows 8 Enterprise x64 Edition (6.2, Build 9200)
I 18:11:52 Total Physical Memory: 67,017,688 KiB - Available: 51,981,968 KiB
I 18:11:52 Initialising SPTI...
I 18:11:52 Searching for SCSI / ATAPI devices...
I 18:11:52 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (P:) (SCSI)
I 18:11:53 -> Drive 2 - Info: ASUS BW-16D1HT 3.10 (X:) (SATA)
I 18:11:53 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE XL!
I 18:11:58 Operation Started!
I 18:11:58 Source File: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
I 18:11:58 Source File Sectors: 24,244,416 (MODE1/2048)
I 18:11:58 Source File Size: 49,652,563,968 bytes
I 18:11:58 Source File Volume Identifier: xxxxxxxxxxxxxxxxxxxxxxx
I 18:11:58 Source File Volume Set Identifier: xxxxxxxxxxxxxxxxxxxxxxxxxxx
I 18:11:58 Source File Application Identifier: vso_hwe.dll 4.0.19.487
I 18:11:58 Source File Implementation Identifier: VsoSoftware
I 18:11:58 Source File File System(s): UDF (2.50)
I 18:11:58 Destination Device: [2:0:0] ASUS BW-16D1HT 3.10 (X:) (SATA)
I 18:11:58 Destination Media Type: BD-R (Disc ID: RITEK-DR3-000)
I 18:11:58 Destination Media Supported Write Speeds: 2x, 4x, 6x
I 18:11:58 Destination Media Sectors: 24,438,784
I 18:11:58 Write Mode: BD
I 18:11:58 Write Type: DAO
I 18:11:58 Write Speed: MAX
I 18:11:58 Hardware Defect Management Active: No
I 18:11:58 BD-R Verify Not Required: Yes
I 18:11:58 Link Size: Auto
I 18:11:58 Lock Volume: Yes
I 18:11:58 Test Mode: No
I 18:11:58 OPC: No
I 18:11:58 BURN-Proof: Enabled
I 18:11:58 Write Speed Successfully Set! - Effective: 26,976 KB/s (6x)
I 18:12:28 Filling Buffer... (80 MiB)
I 18:12:28 Writing LeadIn...
I 18:12:29 Writing Session 1 of 1... (1 Track, LBA: 0 - 24244415)
I 18:12:29 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 24244415)
I 18:12:29 Writing Layer 0... (LBA: 0 - 12219391)
I 18:28:11 Writing Layer 1... (LBA: 12219392 - 24244415)
I 18:43:42 Synchronising Cache...
I 18:43:43 Closing Track...
I 18:43:44 Finalising Disc...
I 18:44:01 Operation Successfully Completed! - Duration: 00:32:03
I 18:44:01 Average Write Rate: 25,902 KiB/s (5.9x) - Maximum Write Rate: 26,758 KiB/s (6.1x)
I 18:44:01 Cycling Tray before Verify...
W 18:44:09 Waiting for device to become ready...
I 18:44:24 Device Ready!
I 18:44:25 Operation Started!
I 18:44:25 Source Device: [2:0:0] ASUS BW-16D1HT 3.10 (X:) (SATA)
I 18:44:25 Source Media Type: BD-R (Disc ID: RITEK-DR3-000)
I 18:44:25 Source Media Supported Read Speeds: 2x, 4x, 6x, 8x
I 18:44:25 Source Media Supported Write Speeds: 2x, 4x, 6x
I 18:44:25 Source Media Sectors: 24,244,416
I 18:44:25 Source Media Size: 49,652,563,968 bytes
I 18:44:25 Image File: XXXXXXXXXXXXXXXXXXXXXXXXXXXX
I 18:44:25 Image File Sectors: 24,244,416 (MODE1/2048)
I 18:44:25 Image File Size: 49,652,563,968 bytes
I 18:44:25 Image File Volume Identifier: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
I 18:44:25 Image File Volume Set Identifier: XXXXXXXXXXXXXXXXXXXXXXXX
I 18:44:25 Image File Application Identifier: vso_hwe.dll 4.0.19.487
I 18:44:25 Image File Implementation Identifier: VsoSoftware
I 18:44:25 Image File File System(s): UDF (2.50)
I 18:44:25 Read Speed (Data/Audio): MAX / MAX
I 18:44:26 Read Speed - Effective: 3x - 8x, 8x - 3x
I 18:44:26 Verifying Session 1 of 1... (1 Track, LBA: 0 - 24244415)
I 18:44:26 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 24244415)
I 18:44:26 Verifying Layer 0... (LBA: 0 - 12219391)
I 19:00:36 Verifying Layer 1... (LBA: 12219392 - 24244415)
W 19:00:52 Failed to Read Sectors 12219808 - 12219839 - Reason: Timeout on Logical Unit
W 19:01:01 Failed to Read Sector 12219808 - Reason: Timeout on Logical Unit
W 19:01:01 Sector 12219808 maps to File: \BDMV\STREAM\00042.m2ts
W 19:01:06 Retrying (1)...
W 19:01:18 Retry Failed - Reason: Timeout on Logical Unit
W 19:01:19 Retrying (2)...
W 19:01:29 Retry Failed - Reason: Timeout on Logical Unit
W 19:01:34 Retrying (3)...
W 19:01:46 Retry Failed - Reason: Timeout on Logical Unit
E 19:01:48 Failed to Read Sector 12219808 - Reason: Timeout on Logical Unit
E 19:01:48 Sector 12219808 maps to File: \BDMV\STREAM\00042.m2ts
E 19:01:49 Failed to Verify Sectors!
E 19:01:50 Operation Failed! - Duration: 00:17:23
I 19:01:50 Average Verify Rate: 23,454 KiB/s (5.3x) - Maximum Verify Rate: 36,139 KiB/s (8.2x)
I 19:01:51 Close Request Acknowledged
I 19:01:51 Closing Down...
I 19:01:51 Shutting down SPTI...
I 19:01:51 ImgBurn closed!