Jump to content

roller

Members
  • Content Count

    8
  • Joined

  • Last visited

About roller

  • Rank
    ISF Newbie
  1. roller

    Does this mean my drive is dying?

    Try a lens cleaning disc on your burner. Try the other available write speeds. I will try a lens cleaner.. but the burn was fine. The failure was during verify. It is a SATA drive.
  2. roller

    Does this mean my drive is dying?

    OK here is the entire log: ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Friday, 09 April 2010, 19:56:40 ; \\****************************************// ; ; I 18:51:22 ImgBurn Version 2.5.1.0 started! I 18:51:22 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 18:51:22 Total Physical Memory: 4,192,808 KB - Available: 2,694,440 KB I 18:51:22 Initialising SPTI... I 18:51:22 Searching for SCSI / ATAPI devices... I 18:51:22 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (K:) (SCSI) I 18:51:22 -> Drive 2 - Info: PLEXTOR DVDR PX-755A 1.08 (E:) (ATA) I 18:51:22 Found 1 DVD±RW and 1 BD-ROM/HD DVD-ROM! I 18:53:37 Operation Started! I 18:53:37 Source File: D:\source.dvd I 18:53:37 Source File Sectors: 3,827,488 (MODE1/2048) I 18:53:37 Source File Size: 7,838,695,424 bytes I 18:53:37 Source File Volume Identifier: DVD_ROM I 18:53:37 Source File Volume Set Identifier: ec67c000MS UDFBridge I 18:53:37 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 18:53:37 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 18:53:37 Source File File System(s): ISO9660, UDF (1.50) I 18:53:37 Destination Device: [6:0:0] PLEXTOR DVDR PX-755A 1.08 (E:) (ATA) I 18:53:37 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 18:53:37 Destination Media Sectors: 4,173,824 I 18:53:37 Write Mode: DVD I 18:53:37 Write Type: DAO I 18:53:37 Write Speed: MAX I 18:53:37 Link Size: Auto I 18:53:37 Lock Volume: Yes I 18:53:37 Test Mode: No I 18:53:37 OPC: Yes I 18:53:37 BURN-Proof: Enabled I 18:53:37 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 18:53:37 Book Type Setting: DVD-ROM I 18:53:37 Advanced Settings - AutoStrategy: Auto, PowerRec: Yes I 18:54:29 Optimal L0 Data Zone Capacity: 1,913,760 I 18:54:29 Optimal L0 Data Zone Method: Copied From Original Disc I 18:54:29 Set L0 Data Zone Capacity Succeeded! I 18:54:30 Filling Buffer... (40 MB) I 18:54:31 Writing LeadIn... I 18:54:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 18:54:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 18:54:47 Writing Layer 0... (LBA: 0 - 1913759) I 19:03:09 Writing Layer 1... (LBA: 1913760 - 3827487) I 19:11:10 Synchronising Cache... I 19:11:13 Closing Track... I 19:11:15 Finalising Disc... I 19:11:58 Exporting Graph Data... I 19:11:58 Graph Data File: C:\Users\Roller\AppData\Roaming\ImgBurn\Graph Data Files\PLEXTOR_DVDR_PX-755A_1.08_FRIDAY-APRIL-09-2010_6-53_PM_MKM-001-00_MAX.ibg I 19:11:58 Export Successfully Completed! I 19:11:58 Operation Successfully Completed! - Duration: 00:18:19 I 19:11:58 Average Write Rate: 7,795 KB/s (5.6x) - Maximum Write Rate: 8,394 KB/s (6.1x) I 19:11:58 Cycling Tray before Verify... W 19:13:30 Waiting for device to become ready... W 19:13:31 Device Not Ready - Tracking Servo Failure W 19:13:31 Retrying (1 of 3)... I 19:13:31 Cycling Tray before Verify... W 19:15:38 Waiting for device to become ready... W 19:15:39 Retry Failed - Reason: Tracking Servo Failure W 19:15:39 Retrying (2 of 3)... I 19:15:39 Cycling Tray before Verify... I 19:16:22 Device Ready! I 19:18:34 Operation Started! I 19:18:34 Source Device: [6:0:0] PLEXTOR DVDR PX-755A 1.08 (E:) (ATA) I 19:18:34 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 19:18:34 Image File: D:\s-scc.dvd I 19:18:34 Image File Sectors: 3,827,488 (MODE1/2048) I 19:18:34 Image File Size: 7,838,695,424 bytes I 19:18:34 Image File Volume Identifier: DVD_ROM I 19:18:34 Image File Volume Set Identifier: ec67c000MS UDFBridge I 19:18:34 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:18:34 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 19:18:34 Image File File System(s): ISO9660, UDF (1.50) I 19:18:34 Read Speed (Data/Audio): MAX / MAX I 19:18:34 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:18:34 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:18:34 Verifying Layer 0... (LBA: 0 - 1913759) W 19:18:48 Failed to Read Sector 0 - Reason: Logical Block Address out of Range W 19:19:20 Retrying (1)... W 19:19:21 Retry Failed - Reason: Logical Block Address out of Range W 19:19:28 Retrying (2)... W 19:19:29 Retry Failed - Reason: Logical Block Address out of Range E 19:19:31 Failed to Read Sector 0 - Reason: Logical Block Address out of Range E 19:19:31 Failed to Verify Sectors! I 19:19:31 Exporting Graph Data... I 19:19:31 Graph Data File: C:\Users\Roller\AppData\Roaming\ImgBurn\Graph Data Files\PLEXTOR_DVDR_PX-755A_1.08_FRIDAY-APRIL-09-2010_6-53_PM_MKM-001-00_MAX.ibg I 19:19:31 Export Successfully Completed! E 19:19:31 Operation Failed! - Duration: 00:00:57 I 19:19:31 Average Verify Rate: N/A - Maximum Verify Rate: N/A I 19:56:39 Close Request Acknowledged I 19:56:39 Closing Down... I 19:56:40 Shutting down SPTI... I 19:56:40 ImgBurn closed!
  3. The following happened during a verify: After the burn: I 19:11:58 Cycling Tray before Verify... W 19:13:30 Waiting for device to become ready... W 19:13:31 Device Not Ready - Tracking Servo Failure W 19:13:31 Retrying (1 of 3)... I 19:13:31 Cycling Tray before Verify... W 19:15:38 Waiting for device to become ready... W 19:15:39 Retry Failed - Reason: Tracking Servo Failure W 19:15:39 Retrying (2 of 3)... I 19:15:39 Cycling Tray before Verify... I 19:16:22 Device Ready! Ok.. but after a little while... W 19:18:48 Failed to Read Sector 0 - Reason: Logical Block Address out of Range W 19:19:20 Retrying (1)... W 19:19:21 Retry Failed - Reason: Logical Block Address out of Range W 19:19:28 Retrying (2)... W 19:19:29 Retry Failed - Reason: Logical Block Address out of Range E 19:19:31 Failed to Read Sector 0 - Reason: Logical Block Address out of Range E 19:19:31 Failed to Verify Sectors! --- Also my drive has been having trouble reading certain disks lately.
  4. You know that notice where ImgBurn can't lock the drive? It would be cool if there was a button like "End WMP and try again". Much better than firing up task manager to end it.
  5. Today ImgBurn generated a very nice label for my dvd. I was impressed. Great Success!
  6. roller

    Freeze at LeadIn

    I fixed it! I had 1.05 firmware. I had to switch SATA mode from AHCI to IDE (Legacy) to do the firmware upgrade to 1.07. Apparently only firmware 1.06+ supports Vista... And the firmware flasher does not run if your drive is on AHCI. Everything is good now! Thanks for this great piece of software and keep up the good work!
  7. roller

    Freeze at LeadIn

    Well I tried updating the firmware.. But that freezes things up too. T.T However.. I set the drive to PIO mode and it seems to work now. I will see what else I can do to update the firmware, but for now I will just run it in PIO. I dunno if it's worth mentioning.. but I just tried burning an ISO and it seems to be working fine.. just the Device Buffer is always at 94%. Never actually hits 100... (This is in PIO) [i added a log of the previous burn] ImgBurn.log
  8. roller

    Freeze at LeadIn

    I have a Plextor PX-755A drive and I'm trying to burn a CD image. My drive just stops after around 15seconds. The drive activity LED on my case is still lit. I've tried different media. Any idea? I can't stop the recording, ImgBurn freezes up, and the only way is to reset the computer. Almost like the SATA bus just stops responding.
×

Important Information

By using this site, you agree to our Terms of Use.