Georgio Posted March 25, 2011 Share Posted March 25, 2011 hi Folks Using Dvd Flick after it has processed everything and when it then used to just to onto Img Burn and make a dvd I now get an error message saying There doesen't appear to be enough space on the disc to burn this image. it then asks if I want to continue Yes Or No and then if I hit Yes it gives another whole technical message I uninstalled both Dvd Flick and Img Burn and re installed them both I have tried a test of a 1 minute video clip and have a full unused dvd and it says not enough space hmmm? pls can anyone help me with this George Sydney Australia Link to comment Share on other sites More sharing options...
ianymaty Posted March 25, 2011 Share Posted March 25, 2011 Are you using CD or DVD? Do you have more than one DVD burner? Post the log. http://forum.imgburn.com/index.php?showtopic=14632 Make sure you set the Target size to DVD (4,3 GB) in DVD Flick/Project settings/General Link to comment Share on other sites More sharing options...
Georgio Posted March 25, 2011 Author Share Posted March 25, 2011 Are you using CD or DVD? Do you have more than one DVD burner? Post the log. http://forum.imgburn.com/index.php?showtopic=14632 Make sure you set the Target size to DVD (4,3 GB) in DVD Flick/Project settings/General ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Thanks I checked the setting and it was for a dvd size I am using a dvd and I tried with a short .flv clip of 3.5 minutes and it worked just fine so I will try now with a full movie and let you know here is the log just agter having converted with DVD flick and burned with IMG Sorry I dont know how else to put the log into this reply so here it is in the body of the reply thanks so much George I 06:02:05 ImgBurn Version 2.4.2.0 started! I 06:02:05 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 06:02:05 Total Physical Memory: 1,047,276 KB - Available: 407,868 KB I 06:02:06 Initialising SPTI... I 06:02:06 Searching for SCSI / ATAPI devices... I 06:02:06 Found 1 DVD±RW and 1 DVD±RW/RAM! I 06:02:06 Operation Started! I 06:02:06 Building Image Tree... I 06:02:06 Checking Directory Depth... I 06:02:06 Calculating Totals... I 06:02:06 Preparing Image... I 06:02:06 Checking Path Length... I 06:02:06 Contents: 5 Files, 2 Folders I 06:02:06 Size: 216,764,416 bytes I 06:02:06 Sectors: 105,842 I 06:02:06 Image Size: 217,382,912 bytes I 06:02:06 Image Sectors: 106,144 I 06:02:06 Operation Successfully Completed! - Duration: 00:00:00 I 06:02:06 Operation Started! I 06:02:06 Source File: -==/\/[bUILD IMAGE]\/\==- I 06:02:06 Source File Sectors: 106,144 (MODE1/2048) I 06:02:06 Source File Size: 217,382,912 bytes I 06:02:06 Source File Volume Identifier: DVD Video I 06:02:06 Source File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER! I 06:02:06 Source File Implementation Identifier: ImgBurn I 06:02:06 Source File File System(s): ISO9660, UDF (1.02) I 06:02:06 Destination Device: [3:0:0] Optiarc DVD RW AD-7240S 1.01 (D:) (ATA) I 06:02:06 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x) I 06:02:06 Destination Media Sectors: 2,298,496 I 06:02:06 Write Mode: DVD I 06:02:06 Write Type: DAO I 06:02:06 Write Speed: 4x I 06:02:06 Link Size: Auto I 06:02:06 Test Mode: No I 06:02:06 OPC: No I 06:02:06 BURN-Proof: Enabled I 06:02:07 Filling Buffer... (40 MB) I 06:02:07 Writing LeadIn... I 06:02:37 Writing Session 1 of 1... (1 Track, LBA: 0 - 106143) I 06:02:37 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 106143) I 06:03:17 Synchronising Cache... I 06:05:56 Operation Successfully Completed! - Duration: 00:03:49 I 06:05:56 Average Write Rate: 5,443 KB/s (3.9x) - Maximum Write Rate: 5,566 KB/s (4.0x) I 06:05:56 Cycling Tray before Verify... W 06:06:04 Waiting for device to become ready... I 06:06:13 Device Ready! I 06:06:13 Operation Started! I 06:06:13 Source Device: [3:0:0] Optiarc DVD RW AD-7240S 1.01 (D:) (ATA) I 06:06:13 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x) I 06:06:13 Image File: -==/\/[bUILD IMAGE]\/\==- I 06:06:14 Image File Sectors: 106,144 (MODE1/2048) I 06:06:14 Image File Size: 217,382,912 bytes I 06:06:14 Image File Volume Identifier: DVD Video I 06:06:14 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER! I 06:06:14 Image File Implementation Identifier: ImgBurn I 06:06:14 Image File File System(s): ISO9660, UDF (1.02) I 06:06:14 Read Speed (Data/Audio): MAX / MAX I 06:06:14 Verifying Session 1 of 1... (1 Track, LBA: 0 - 106143) I 06:06:14 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 106143) I 06:06:44 Operation Successfully Completed! - Duration: 00:00:25 I 06:06:44 Average Verify Rate: 8,491 KB/s (6.1x) - Maximum Verify Rate: 10,240 KB/s (7.4x) I 06:06:44 Close Request Acknowledged I 06:06:44 Closing Down... I 06:06:44 Shutting down SPTI... I 06:06:44 ImgBurn closed! Link to comment Share on other sites More sharing options...
ianymaty Posted March 25, 2011 Share Posted March 25, 2011 You are using the old version of ImgBurn that comes with DVDFlick. Copy and replace imgburn.exe from Program Files\DVD Flick\imgburn with the new version from Program Files\ImgBurn. Download and install the current version if you didn't already. Update the firmware for your burner to latest 1.04, currenly you are using 1.01 http://www.firmwarehq.com/Optiarc/AD-7240S/files.html Link to comment Share on other sites More sharing options...
Georgio Posted March 25, 2011 Author Share Posted March 25, 2011 You are using the old version of ImgBurn that comes with DVDFlick. Copy and replace imgburn.exe from Program Files\DVD Flick\imgburn with the new version from Program Files\ImgBurn. Download and install the current version if you didn't already. Update the firmware for your burner to latest 1.04, currenly you are using 1.01 http://www.firmwarehq.com/Optiarc/AD-7240S/files.html ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ OK thanks my friend. I will do that but I am just thinking how can that be because yesterday I uninstalled IMG burn and went to the official IMG burn site and downloaded what I thought was the latest version. My Dvd FLick is doing a process now so I dont want to interrupt,(I am writing from my laptop, and the process is happening on my desktop), so when that finishes I will go to the link you have given me. Do you want me to send you the log again, after it burns the movie it is processing? thanks George Link to comment Share on other sites More sharing options...
Georgio Posted March 25, 2011 Author Share Posted March 25, 2011 You are using the old version of ImgBurn that comes with DVDFlick. Copy and replace imgburn.exe from Program Files\DVD Flick\imgburn with the new version from Program Files\ImgBurn. Download and install the current version if you didn't already. Update the firmware for your burner to latest 1.04, currenly you are using 1.01 http://www.firmwarehq.com/Optiarc/AD-7240S/files.html ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ OK thanks my friend. I will do that but I am just thinking how can that be because yesterday I uninstalled IMG burn and went to the official IMG burn site and downloaded what I thought was the latest version. My Dvd FLick is doing a process now so I dont want to interrupt,(I am writing from my laptop, and the process is happening on my desktop), so when that finishes I will go to the link you have given me. Do you want me to send you the log again, after it burns the movie it is processing? thanks George Ok me again, I have just installed the firmware for my dvd burner to 1.04 so thanks so much for that. I have 2 dvd burners on my desktop PC and am now running a process with DVD Flick but have set it to burn on the E Drive which is the other burner, to see if it burns successfully, if you dont mind I can send you the log of that one to see if it also needs upgrading to the latest Firmware. Thank you George Link to comment Share on other sites More sharing options...
Georgio Posted March 25, 2011 Author Share Posted March 25, 2011 You are using the old version of ImgBurn that comes with DVDFlick. Copy and replace imgburn.exe from Program Files\DVD Flick\imgburn with the new version from Program Files\ImgBurn. Download and install the current version if you didn't already. Update the firmware for your burner to latest 1.04, currenly you are using 1.01 http://www.firmwarehq.com/Optiarc/AD-7240S/files.html ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ OK thanks my friend. I will do that but I am just thinking how can that be because yesterday I uninstalled IMG burn and went to the official IMG burn site and downloaded what I thought was the latest version. My Dvd FLick is doing a process now so I dont want to interrupt,(I am writing from my laptop, and the process is happening on my desktop), so when that finishes I will go to the link you have given me. Do you want me to send you the log again, after it burns the movie it is processing? thanks George Ok me again, I have just installed the firmware for my dvd burner to 1.04 so thanks so much for that. I have 2 dvd burners on my desktop PC and am now running a process with DVD Flick but have set it to burn on the E Drive which is the other burner, to see if it burns successfully, if you dont mind I can send you the log of that one to see if it also needs upgrading to the latest Firmware. Thank you George Hi Again I Hope this is ok for me to send you the log of the other burner so here it is I used a rewriteable dvd so it had to erase it first Thank you again George I 09:19:51 ImgBurn Version 2.4.2.0 started! I 09:19:51 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 09:19:51 Total Physical Memory: 1,047,276 KB - Available: 505,928 KB I 09:19:51 Initialising SPTI... I 09:19:51 Searching for SCSI / ATAPI devices... I 09:19:51 Found 1 DVD±RW and 1 DVD±RW/RAM! I 09:19:52 Operation Started! I 09:19:52 Device: [1:1:0] _NEC DVD_RW ND-1300A 1.0A (E:) (ATA) I 09:19:52 Media Type: DVD+RW (Disc ID: PHILIPS-041-00) (Speeds: 2.4x) I 09:19:52 Quick Erase: No I 09:19:52 Erasing Disc... I 09:44:47 Operation Successfully Completed! - Duration: 00:24:55 I 09:44:48 Operation Started! I 09:44:48 Building Image Tree... I 09:44:48 Checking Directory Depth... I 09:44:48 Calculating Totals... I 09:44:48 Preparing Image... I 09:44:48 Checking Path Length... I 09:44:48 Contents: 5 Files, 2 Folders I 09:44:48 Size: 66,308,096 bytes I 09:44:48 Sectors: 32,377 I 09:44:48 Image Size: 66,912,256 bytes I 09:44:48 Image Sectors: 32,672 I 09:44:48 Operation Successfully Completed! - Duration: 00:00:00 I 09:44:48 Operation Started! I 09:44:48 Source File: -==/\/[bUILD IMAGE]\/\==- I 09:44:48 Source File Sectors: 32,672 (MODE1/2048) I 09:44:48 Source File Size: 66,912,256 bytes I 09:44:48 Source File Volume Identifier: DVD Video I 09:44:48 Source File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER! I 09:44:48 Source File Implementation Identifier: ImgBurn I 09:44:48 Source File File System(s): ISO9660, UDF (1.02) I 09:44:48 Destination Device: [1:1:0] _NEC DVD_RW ND-1300A 1.0A (E:) (ATA) I 09:44:48 Destination Media Type: DVD+RW (Disc ID: PHILIPS-041-00) (Speeds: 2.4x) I 09:44:48 Destination Media Sectors: 2,295,104 I 09:44:48 Write Mode: DVD I 09:44:48 Write Type: DAO I 09:44:48 Write Speed: 4x I 09:44:48 Link Size: Auto I 09:44:48 Test Mode: No I 09:44:48 OPC: No I 09:44:48 BURN-Proof: Enabled I 09:44:48 Book Type Setting: N/A I 09:44:48 Filling Buffer... (40 MB) I 09:44:49 Writing LeadIn... I 09:44:56 Writing Session 1 of 1... (1 Track, LBA: 0 - 32671) I 09:44:56 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 32671) I 09:45:16 Synchronising Cache... I 09:45:17 Closing Session... I 09:45:18 Operation Successfully Completed! - Duration: 00:00:29 I 09:45:18 Average Write Rate: 3,439 KB/s (2.5x) - Maximum Write Rate: 3,439 KB/s (2.5x) I 09:45:18 Cycling Tray before Verify... I 09:45:47 Device Ready! I 09:45:47 Operation Started! I 09:45:47 Source Device: [1:1:0] _NEC DVD_RW ND-1300A 1.0A (E:) (ATA) I 09:45:47 Source Media Type: DVD+RW (Book Type: DVD+RW) (Disc ID: PHILIPS-041-00) (Speeds: 2.4x) I 09:45:47 Image File: -==/\/[bUILD IMAGE]\/\==- I 09:45:47 Image File Sectors: 32,672 (MODE1/2048) I 09:45:47 Image File Size: 66,912,256 bytes I 09:45:47 Image File Volume Identifier: DVD Video I 09:45:47 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER! I 09:45:47 Image File Implementation Identifier: ImgBurn I 09:45:48 Image File File System(s): ISO9660, UDF (1.02) I 09:45:48 Read Speed (Data/Audio): MAX / MAX I 09:45:48 Verifying Session 1 of 1... (1 Track, LBA: 0 - 32671) I 09:45:48 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 32671) I 09:46:14 Operation Successfully Completed! - Duration: 00:00:23 I 09:46:14 Average Verify Rate: 2,970 KB/s (2.1x) - Maximum Verify Rate: 3,284 KB/s (2.4x) I 09:46:15 Close Request Acknowledged I 09:46:15 Closing Down... I 09:46:15 Shutting down SPTI... I 09:46:15 ImgBurn closed! Link to comment Share on other sites More sharing options...
Cynthia Posted March 26, 2011 Share Posted March 26, 2011 OK thanks my friend. I will do that but I am just thinking how can that be because yesterday I uninstalled IMG burn and went to the official IMG burn site and downloaded what I thought was the latest version. You need to copy the new version of ImgBurn's .exe files to this location (that currently contains the outdated version). C:\Program Files\DVD Flick\imgburn Link to comment Share on other sites More sharing options...
Georgio Posted March 26, 2011 Author Share Posted March 26, 2011 Thank you Cynthia Just because I am still learning myself about technical stuff, how exactly do I do that, because when I downloaded the latest IMG burn I did not click SAVE when it asked me what I wanted to do I just clicked on RUN Would I have to uninstall IMG burn now and then reinstall from www.imgburn.com and then it would put the latest one into Program Files automatically? or is there another way? Thanks George Link to comment Share on other sites More sharing options...
Cynthia Posted March 26, 2011 Share Posted March 26, 2011 Copy these two files from C:\Program Files\ImgBurn ImgBurn.exe ImgBurnPreview.exe to C:\Program Files\DVD Flick\imgburn and then DVD Flick will use the latest version when you burn from DVD Flick. There doesen't appear to be enough space on the disc to burn this image. If you want the output from DVD Flick to fit a single layer disc - make sure that the "Project Settings" -> General -> Target Size is set to DVD (4.3GB) in DVD Flick. Link to comment Share on other sites More sharing options...
ianymaty Posted March 26, 2011 Share Posted March 26, 2011 Hope you managed to replace the .exe in the end. Here is the latest firmware for your NEC drive 1.0C, for now you have 1.0A installed http://www.firmwarehq.com/NEC/ND-1300A/files.html Link to comment Share on other sites More sharing options...
Georgio Posted March 26, 2011 Author Share Posted March 26, 2011 Copy these two files from C:\Program Files\ImgBurn ImgBurn.exe ImgBurnPreview.exe to C:\Program Files\DVD Flick\imgburn and then DVD Flick will use the latest version when you burn from DVD Flick. There doesen't appear to be enough space on the disc to burn this image. If you want the output from DVD Flick to fit a single layer disc - make sure that the "Project Settings" -> General -> Target Size is set to DVD (4.3GB) in DVD Flick. Thanks Cynthia I did exactly that I copy and pasted as you said and it asked if I wanted to replace them and of course I said yes and so now they will be updated, yes? and target size is set to 4.3GB in Dvd flick Much appreciated George Link to comment Share on other sites More sharing options...
Georgio Posted March 26, 2011 Author Share Posted March 26, 2011 Hope you managed to replace the .exe in the end. Here is the latest firmware for your NEC drive 1.0C, for now you have 1.0A installed http://www.firmwarehq.com/NEC/ND-1300A/files.html Thanks but this one has me puzzled. I downloaded it at the link you gave me and then once it was downloaded it is a .bin file I think and my VLC player wants to play it and it says its 1.30min in length. It is not opening like the link you sent me for the Optiarc burner. Can you help out here pls? thanks George Link to comment Share on other sites More sharing options...
Georgio Posted March 26, 2011 Author Share Posted March 26, 2011 Hope you managed to replace the .exe in the end. Here is the latest firmware for your NEC drive 1.0C, for now you have 1.0A installed http://www.firmwarehq.com/NEC/ND-1300A/files.html Thanks but this one has me puzzled. I downloaded it at the link you gave me and then once it was downloaded it is a .bin file I think and my VLC player wants to play it and it says its 1.30min in length. It is not opening like the link you sent me for the Optiarc burner. Can you help out here pls? thanks George Ok sorry I went back and clicked on the middle one of the 3 and it downloaded it and the RUN function appeared and it installed just fine thanks a lot for your assistance George Link to comment Share on other sites More sharing options...
Cynthia Posted March 26, 2011 Share Posted March 26, 2011 now they will be updated, yes? Yes. Link to comment Share on other sites More sharing options...
Recommended Posts