Hans L

Hello: I know that this is not a new issue, but why is NIS warning me about the installation file of Imgburn probably containing a Trojan? Why has Imgburn not done something to alleviate the situation? Is it childish obstinate behavior or ...? Why is Imgburn suspected of harboring malware? And, finally, is the installation file safe? Best, Hans L

I got a similar download cancellation message from NIS when I tried to download from mirror 6 (yes, it was mirror 78 before). So, the fact that the download site (7) has not changed in 2 years does not seem to be the issue, but the file itself. I do not suspect anything intentional, but perhaps a little check of the file would not be so bad? Regards, Hans L

Hello: When I downloaded the latest ImgBurn a minute ago, it was removed by Norton Internet Security. Details: http://download.imgbrun.SetupImgBurn_2.5.8.0.exe Downloaded File aeaevb+i.exe.part Trheat nameL Suspicious.Cloud.2 from imgburn.com ("part" is from file only being partially downloaded.) Does anyone know anything about this. I am not sure what to do. Thanks, Hans L

Thank you,. Will look there! Hans L

A friend suggested fre:ac, which I used as a converter to MP3. I can now play on my simple(small) boonbox, but not on my Bluray player (which I do not need to). However, it would be good to know what format it takes. I will look it up, but if anyone has a comment, I would appreciate it. Regards, Hans L

What I have is a WMA (audio, of course) file that I need to convert. Sorry that I am so scattered! Hans L

Thank you ianymaty! Will try. Hans L

I do not know how my log should be posted. I though I saw something about attachments, but now, I do not see it. Here is the log: ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Thursday, 22 January 2015, 21:04:36 ; \\****************************************// ; ; I 20:56:22 ImgBurn Version 2.5.8.0 started! I 20:56:22 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 20:56:22 Total Physical Memory: 3,144,888 KiB - Available: 1,154,476 KiB I 20:56:22 Initialising SPTI... I 20:56:22 Searching for SCSI / ATAPI devices... I 20:56:22 -> Drive 1 - Info: _NEC DVD_RW ND-4570A 1.03 (M:) (ATA) I 20:56:22 Found 1 DVD±RW/RAM! I 21:02:19 Operation Started! I 21:02:19 Device: [0:0:0] _NEC DVD_RW ND-4570A 1.03 (M:) (ATA) I 21:02:19 Media Type: CD-RW (Disc ID: 97m34s25f, Mitsubishi Chemical Corp.) I 21:02:19 Media Supported Write Speeds: 16x, 24x, 32x I 21:02:19 Quick Erase: Yes I 21:02:19 Erasing Disc... I 21:02:52 Operation Successfully Completed! - Duration: 00:00:32 I 21:02:52 Operation Started! I 21:02:52 Building Image Tree... I 21:03:07 Checking Directory Depth... I 21:03:07 Calculating Totals... I 21:03:07 Preparing Image... I 21:03:07 Checking Path Length... I 21:03:07 Contents: 1 File, 0 Folders I 21:03:07 Content Type: Data I 21:03:07 Data Type: MODE1/2048 I 21:03:07 File System(s): ISO9660, UDF (1.02) I 21:03:07 Volume Label: Relax I 21:03:07 Size: 21,270,997 bytes I 21:03:07 Sectors: 10,387 I 21:03:07 Image Size: 21,823,488 bytes I 21:03:07 Image Sectors: 10,656 I 21:03:10 Operation Successfully Completed! - Duration: 00:00:18 I 21:03:10 Operation Started! I 21:03:10 Source File: -==/\/[bUILD IMAGE]\/\==- I 21:03:10 Source File Sectors: 10,656 (MODE1/2048) I 21:03:10 Source File Size: 21,823,488 bytes I 21:03:10 Source File Volume Identifier: Relax I 21:03:10 Source File Volume Set Identifier: 4636A85A0000299C I 21:03:10 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER! I 21:03:10 Source File Implementation Identifier: ImgBurn I 21:03:10 Source File File System(s): ISO9660, UDF (1.02) I 21:03:10 Destination Device: [0:0:0] _NEC DVD_RW ND-4570A 1.03 (M:) (ATA) I 21:03:10 Destination Media Type: CD-RW (Disc ID: 97m34s25f, Mitsubishi Chemical Corp.) I 21:03:10 Destination Media Supported Write Speeds: 16x, 24x, 32x I 21:03:10 Destination Media Sectors: 359,847 I 21:03:10 Write Mode: CD I 21:03:10 Write Type: SAO I 21:03:10 Write Speed: MAX I 21:03:10 Lock Volume: Yes I 21:03:10 Test Mode: No I 21:03:10 OPC: No I 21:03:10 BURN-Proof: Enabled I 21:03:10 Write Speed Successfully Set! - Effective: 5,645 KB/s (32x) I 21:03:10 Filling Buffer... (80 MiB) I 21:03:11 Writing LeadIn... I 21:03:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 10655) I 21:03:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 10655) I 21:03:31 Synchronising Cache... I 21:03:48 Exporting Graph Data... I 21:03:48 Graph Data File: C:\Users\Hans L\AppData\Roaming\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-4570A_1.03_THURSDAY-JANUARY-22-2015_9-03_PM_97m34s25f_MAX.ibg I 21:03:48 Export Successfully Completed! I 21:03:48 Operation Successfully Completed! - Duration: 00:00:38 I 21:03:48 Average Write Rate: 2,664 KiB/s (15.5x) - Maximum Write Rate: 3,034 KiB/s (17.6x) I 21:03:48 Cycling Tray before Verify... I 21:04:06 Device Ready! I 21:04:09 Operation Started! I 21:04:09 Source Device: [0:0:0] _NEC DVD_RW ND-4570A 1.03 (M:) (ATA) I 21:04:09 Source Media Type: CD-RW (Disc ID: 97m34s25f, Mitsubishi Chemical Corp.) I 21:04:09 Source Media Supported Read Speeds: 4x, 8x, 10x, 16x, 20x, 24x, 32x, 40x I 21:04:09 Source Media Supported Write Speeds: 16x, 24x, 32x I 21:04:09 Source Media Sectors: 10,656 I 21:04:09 Source Media Size: 21,823,488 bytes I 21:04:09 Image File: -==/\/[bUILD IMAGE]\/\==- I 21:04:09 Image File Sectors: 10,656 (MODE1/2048) I 21:04:09 Image File Size: 21,823,488 bytes I 21:04:09 Image File Volume Identifier: Relax I 21:04:09 Image File Volume Set Identifier: 4636A85A0000299C I 21:04:09 Image File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER! I 21:04:09 Image File Implementation Identifier: ImgBurn I 21:04:09 Image File File System(s): ISO9660, UDF (1.02) I 21:04:09 Read Speed (Data/Audio): MAX / MAX I 21:04:10 Read Speed - Effective: 40x I 21:04:10 Verifying Session 1 of 1... (1 Track, LBA: 0 - 10655) I 21:04:10 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 10655) I 21:04:30 Exporting Graph Data... I 21:04:30 Graph Data File: C:\Users\Hans L\AppData\Roaming\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-4570A_1.03_THURSDAY-JANUARY-22-2015_9-03_PM_97m34s25f_MAX.ibg I 21:04:30 Export Successfully Completed! I 21:04:30 Operation Successfully Completed! - Duration: 00:00:20 I 21:04:30 Average Verify Rate: 1,121 KiB/s (6.5x) - Maximum Verify Rate: 1,214 KiB/s (7.0x) I 21:04:35 Close Request Acknowledged I 21:04:35 Closing Down... I 21:04:35 Shutting down SPTI... I 21:04:35 ImgBurn closed!

Hello: I burned a disk (for the first time in a long time), and I can play it on my computer, but not on a regular cd player. I am sure this is easy, but I am so swamped with databaase coding work and spam-fighting galore (fighting with my host) that I must take this easy way out and ask for youf kind help. How do I use Imgburn to create a disk that can be player on regular players. Thank you for your help! Hans L

Hello: I have a DVD (with VIDEO_TS, AUDIO_TS, and two folders with jpg files). As a newbie, I am not sure how to create a copy of the disc with ImgBurn. Striaght copying (not with ImgBurn, of course) of files did not work, that is, the files were copied okay, but the disccould not be played on a recorder. Grateful for some pointers. Regards, Hans L

Aha, "the" driver :-) Boy, while I am computer-literate (I built this computer), I realize how darn little I know (and how much I have learned in this thread). One final question: where do I find "the driver"? I will also take this opportunity to thank you all -- mm, lightning, and cynthia -- for your very kind and valuable help. Regards, Hans L

In Advanced -> OnBoard Devices Configuration, I have JMicron SATA/PATA Controller [Enabled] ...JMicron Controller Mode [iDE] No explanation in the manual what this setting really means. I changed "[iDE]" to "[AHCI]". and all drives were reconfigured. Burning still possible on my NEC. I cannot change Main -> IDE Configuration -> Configure SATA as [iDE] (other options are "RAID" and "AHCI") to "AHCI", because, during startup, shortly after WINDOWS is first shown, a blue screen of death flickers by and reboots the computer, and the whole process starts over again. So, it has to stay IDE. I will have to go to ASUS and ask them for some details on this. Regards, Hans L

I would like to ask you, if I may, a few final questions. How would I move the drive to another controller, and what would that controller be, and where would I find it? ------ And while this might only be slightly related, let me still ask: I have this in Bios Setup Utility -- Main: IDE Configuration SATA Configuration [Enhanced] Configure SATA as [iDE] (other options are "RAID" and "AHCI") I am somewhat confused why one would configure SATA under "IDE Configuration". I have my internal and external hard drives on SATA -- would this setting to "[iDE]" affect those SATA connections? Regards, Hans L

Okay, I will go to the JMicron site from now on (but I think I picked up .14 from there). In any event, I flashed firmware 1.03 (latest) for my NEC. Restarted computer, and played an audio disk!!! Progress!!!! Then, I used ImgBurn to try to burn. Success!!!!!!! However, as you can see below, in the log, it is still RAID. And I have one or two more questions about that, but I need to reboot and enter SETUP in order to ask. I'll be bakk! Regards, Hans (not from Austria, but Sweden, originally :-) PS. Log: I 10:11:28 ImgBurn Version 2.4.4.0 started! I 10:11:28 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 10:11:28 Total Physical Memory: 2,096,236 KB - Available: 1,152,964 KB I 10:11:28 Initialising SPTI... I 10:11:28 Searching for SCSI / ATAPI devices... I 10:11:28 Found 1 DVD

Hello Lightning: Thank you. Thought I had responded and said that it would be a day or two before I could update. Now, I have updated all things ASUS motherboard. When i comes to JMicron, it is amazing how many places has different versions as the latest. The latest I found were R1.17.47.14 and R1.17.47.14_Sata. I installed ..._Sata, but I have no idea if I should have installed non-Sata instead. I will now move connections from my borrowed wife's optical drive (no, my wife is not borrowed :-) to my NEC and install firmware 1.03, and then report back here to see what I should do next. Regards, Hans L