Jump to content

Gabe

Members
  • Content Count

    20
  • Joined

  • Last visited

About Gabe

  • Rank
    ISF Newbie
  1. Gabe

    No Writers Detected! on Windows 7

    Thank you, all of you very generous people. It honestly is very much appreciated!
  2. Gabe

    No Writers Detected! on Windows 7

    I think dbminter might have shed some light on what's wrong by writing "unless Windows is not properly detecting the hardware type." I tried a Verbatim External Slimline CD/DVD Writer model 98938, and it's also not listed as a writer in the Feurio CD Writer Writer Settings. Even though it's listed in Windows 7 Device Manager as a Mass Storage Device, Feurio does not recognize it as a Writer. Feurio is able to Read an Audio cd inserted into that drive, but cannot write to a blank cd inserted into the drive. Any suggestions on how to proceed to get Feurio to recognize it as a valid Writer?
  3. Gabe

    No Writers Detected! on Windows 7

    Thank you, dbminter and LIGHTNING UK! What's odd to me is I just tried a Roofull External CD/DVD Reader/Writer and I also get a 'No Writers Detected!' with that drive. Device Manager shows that drive as a HL-DT-ST DVDROM DT30N USB Device. Is this not a cd/dvd writer? I've attached the latest log. It's listed there as Drive 2. ImgBurn2.log I understand it if you do not want to recommend specific hardware, but are there any inexpensive external cd writers on Amazon you would be so kind as to please point me to, if you think procuring one of those might fix my inability to write cd's? I see one best seller there from Rodzon and another one from Rioddas.
  4. Gabe

    No Writers Detected! on Windows 7

    THANK YOU VERY MUCH! I didn't consider it could be a read-only drive.
  5. My Win 7 pc can play cd's from the DVD-ROM but shows 'No Writers Detected!' under Destination in ImgBurn. What do I have to do to get this DVD-ROM detected? ImgBurn.log THANKS SO MUCH, in advance, for taking the time to try to help.
  6. So this is still happening intermittently. It seems to not happen if I go into debug-mode (F8). Any suggestions on how I can debug this from the time I get stuck at 'Getting Disc Recording Management Area Information'?
  7. The last message displayed before the program froze up was 'Getting Disc Recording Management Area Information'.
  8. Lightning fast response, Lightning! This is very, very odd. I made my previous post after trying to get the blank dvd accepted 5 or 6 times and having to re-boot the machine each time, as the program and machine hung. I tried it once more so that I could copy down what was in the status bar but IT WORKED THIS TIME! There were some errors in the log so I've attached it. ImgBurn2.log
  9. ImgBurn 2.5.7.0 freezes when I insert blank dvd's into an HL-DT-ST DVD-RW GH70N. It does not happen when I insert blank cd's, only blank dvd's. I'm using Verbatim dvd's marked 'Inkjet Printable DVD-R 16x. I would attach the logs of when it freezes but the machine (XP SP3) becomes totally unresponsive and I cannot save the logs. Would a firmware update help and, if so, which do you think I should use? I tried using the option under 'Tools' that says 'Check for Firmware Update'. That returns 581 results. I understand that this is of limited use but I am attaching the logs that were generated before ImgBurn freezed up. Any suggestions? THANK YOU VERY MUCH for taking the time to read this. ImgBurn.log
  10. Hi there, All of a sudden, I started getting errors writing to a drive that still writes cd's well with Feurio. There's two messages that might be indicative: A Warning that says: Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I've never seen that message before. And then an error that says: Failed to Write Sectors 32 - 63 - Reason: Write Error – Recommend Reassignment Does this mean the drive is toast for writing DVD's although it still writes CD's well? Many thanks to anyone kind enough to read this and reply. I'm attaching the complete log: ImgBurn.log
  11. LIGHTNING UK!, I will buy a bigger flash drive to copy the exact same ISO file and try writing to the exact same blank DVD-R disc in another machine after I get home from work tonight and take care of everyone waiting for dinner. I will report back. THANK YOU![
  12. Thank you for the vote of confidence Cynthia, but if it is in fact something other than faulty drives (which just makes sense to me), then I will use that as a last resort. If I do resort to a drive replacement or two, I might even be able to post my results from the hospital bed after electrocuting myself and burning the house down Seriously though, I'm hoping that the information on the disc info panel or some other diagnostic information can shed some light on this. My intuition tells me that it's some driver/registry conflict. I also wonder if uninstalling Symantec Systemworks might work. If you know how to use a screwdriver it shouldn't be any issues to replace it yourself.
  13. LIGHTNING UK!, your name is Patience! The disc info panel on the right gives me the following: ======================================================= LITE-ON DVDRW SHM-165H6S HP16 (ATA) Current Profile: DVD-ROM Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 2,298,496 Size: 4,707,319,808 bytes Time: 510:48:46 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 2298495) -> LeadOut (LBA: 2298496) Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,495,103 Last Physical Sector in Layer 0: 0 ======================================================= now mind you that it will only do so when I boot in Safe mode, not in normal mode.
  14. You added plenty. Thank you. I'm not sure how to tell the difference in dye on blank dvds but I've tried Verbatim, TDK and Gigaware blanks. I followed your advice and restarted in Safe Mode, started up ImgBurn, inserted a blank dvd into the Lite-On, and then ImgBurn either tells me "Disc Not Empty" or "Device Not Ready (Logical Unit is in process of becoming ready). Interestingly, if I pop out the blank dvd and insert a blank cd, ImgBurn recognizes it fine, as does all other software (even though, of course, they won't burn a dvd to a cd). I don't know how the hardware and software interact in accessing optical media but this tells me that some component of that interaction is being incalcitrant by allowing reads and writes of cds and only reads of dvds, but not writes. It's as if some piece that collaborates in that process won't allow blank dvds and has figured out how to prevent me from backing up a dvd. There are a number of threads on the net with a similar issue but with no answer other than to try removing pxhelp20.sys. I tried this and the Filter Driver Load Order now says =============================================== Filter Driver Load Order - ImgBurn v2.4.4.0 =============================================== Upper Device Filter: redbook Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: [None Found] Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: Redbook Audio Filter Driver Product Name: Microsoft
×

Important Information

By using this site, you agree to our Terms of Use.