Jump to content

kenmasters1976

Members
  • Content Count

    36
  • Joined

  • Last visited

Posts posted by kenmasters1976


  1. It's been a while since I was here in the forum and I don't use ImgBurn as much but it's still THE best tool for the job when I have to burn a disc.

     

    Anyway, there's a few minor things I want to suggest:

    - When setting the label for a disk I normally use the Synchronized editing option and I have to activate it every time. It would be nice if ImgBurn remembered my choice.

    - It would be a good thing it the focus followed the mouse.

    - In the disk layout editor, the typical, expected behavior is that if you press a key, the cursor jumps to the first file starting with that letter/number; however, in ImgBurn it doesn't work. Also, Alt+Tabbing to another window and then back to ImgBurn causes the focus for the DLE to be lost.

     

    This is on Windows 7 64 bits.


  2. I'm looking for an online store that ships Taiyo Yuden DVDs (or good quality media in general) to Mexico. My first thought was to use one of the available Amazon offers but none of them ship to Mexico.

     

    I want to buy, preferably, 100 discs spindles using a PayPal account. Any suggestions are appreciated.


  3. Thanks!.

     

    ImgBurn is the best burning software. Just a few days ago I copied the last InCD discs I had back to the PC so that I could finally get rid of any sign of other burning software I used in the past.

     

    It's always nice to see a new version of ImgBurn even though 2.5.5.0 works great.


  4. Same issue here. It's not a terrible issue as those are just shortcuts but I ended with 4 shortcuts to ImgBurn on my desktop. Oddly enough, all shortcuts are for the same user profile.

     

    As I said, it's not that bad, I just have to delete 3 of them. I'm just pointing this out in case it's useful.

     

    Windows XP SP2 by the way.


  5. I didn't manually save the log 'cause I thought it was just defective discs but I found it in the global ImgBurn log. Anyway, it did also allow me to see that it may just be pure coincidence as the log for the previous disc had the error on a different sector (in the same file but it's a 100 MB file so it's not that strange). I'm guessing it is indeed something with the discs but the fact remains that 7-Zip's verification returned no error. Here's the log:

     

    ;
    ;
    ; //****************************************\\
    ;   ImgBurn Version 2.5.2.0 - Log
    ;   Viernes, 19 Noviembre 2010, 12:31:40
    ; \\****************************************//
    ;
    ;
    I 11:40:00 ImgBurn Version 2.5.2.0 started!
    I 11:40:00 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
    I 11:40:00 Total Physical Memory: 777,200 KB  -  Available: 356,288 KB
    I 11:40:00 Initialising SPTI...
    I 11:40:00 Searching for SCSI / ATAPI devices...
    I 11:40:00 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-4120B A115 (D:) (ATA)
    I 11:40:00 Found 1 DVD±RW/RAM!
    I 12:03:36 Operation Started!
    I 12:03:36 Building Image Tree...
    I 12:03:36 Checking Directory Depth...
    I 12:03:36 Calculating Totals...
    I 12:03:36 Preparing Image...
    I 12:03:37 Checking Path Length...
    I 12:03:37 Contents: 591 Files, 12 Folders
    I 12:03:37 Content Type: Data
    I 12:03:37 Data Type: MODE1/2048
    I 12:03:37 File System(s): ISO9660, UDF (1.02)
    I 12:03:37 Volume Label: [Not Configured]
    I 12:03:37 Size: 4,561,542,786 bytes
    I 12:03:37 Sectors: 2,227,690
    I 12:03:37 Image Size: 4,564,221,952 bytes
    I 12:03:37 Image Sectors: 2,228,624
    I 12:03:37 Operation Successfully Completed! - Duration: 00:00:01
    I 12:04:05 Operation Started!
    I 12:04:05 Building Image Tree...
    I 12:05:05 Checking Directory Depth...
    I 12:05:05 Calculating Totals...
    I 12:05:05 Preparing Image...
    I 12:05:06 Checking Path Length...
    I 12:05:06 Contents: 591 Files, 12 Folders
    I 12:05:06 Content Type: Data
    I 12:05:06 Data Type: MODE1/2048
    I 12:05:06 File System(s): ISO9660, UDF (1.02)
    I 12:05:06 Volume Label: PLEASUREDOME_20101119
    I 12:05:06 Size: 4,561,542,786 bytes
    I 12:05:06 Sectors: 2,227,690
    I 12:05:06 Image Size: 4,564,221,952 bytes
    I 12:05:06 Image Sectors: 2,228,624
    I 12:05:10 Operation Successfully Completed! - Duration: 00:01:04
    I 12:05:10 Operation Started!
    I 12:05:10 Source File: -==/\/[bUILD IMAGE]\/\==-
    I 12:05:10 Source File Sectors: 2,228,624 (MODE1/2048)
    I 12:05:10 Source File Size: 4,564,221,952 bytes
    I 12:05:10 Source File Volume Identifier: PLEASUREDOME_20101119
    I 12:05:10 Source File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER!
    I 12:05:10 Source File Implementation Identifier: ImgBurn
    I 12:05:10 Source File File System(s): ISO9660, UDF (1.02)
    I 12:05:10 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-4120B A115 (D:) (ATA)
    I 12:05:10 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 8x)
    I 12:05:10 Destination Media Sectors: 2,297,888
    I 12:05:10 Write Mode: DVD
    I 12:05:10 Write Type: DAO
    I 12:05:10 Write Speed: 4x
    I 12:05:10 Link Size: Auto
    I 12:05:10 Lock Volume: Yes
    I 12:05:10 Test Mode: No
    I 12:05:10 OPC: No
    I 12:05:10 BURN-Proof: Enabled
    I 12:05:10 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
    I 12:05:10 Filling Buffer... (20 MB)
    I 12:05:13 Writing LeadIn...
    I 12:05:42 Writing Session 1 of 1... (1 Track, LBA: 0 - 2228623)
    I 12:05:42 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2228623)
    I 12:19:27 Synchronising Cache...
    I 12:19:45 Operation Successfully Completed! - Duration: 00:14:35
    I 12:19:45 Average Write Rate: 5,409 KB/s (3.9x) - Maximum Write Rate: 5,750 KB/s (4.2x)
    I 12:19:45 Cycling Tray before Verify...
    W 12:19:52 Waiting for device to become ready...
    I 12:20:07 Device Ready!
    I 12:20:11 Operation Started!
    I 12:20:11 Source Device: [1:0:0] HL-DT-ST DVDRAM GSA-4120B A115 (D:) (ATA)
    I 12:20:11 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 8x)
    I 12:20:11 Image File: -==/\/[bUILD IMAGE]\/\==-
    I 12:20:11 Image File Sectors: 2,228,624 (MODE1/2048)
    I 12:20:11 Image File Size: 4,564,221,952 bytes
    I 12:20:11 Image File Volume Identifier: PLEASUREDOME_20101119
    I 12:20:11 Image File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER!
    I 12:20:11 Image File Implementation Identifier: ImgBurn
    I 12:20:11 Image File File System(s): ISO9660, UDF (1.02)
    I 12:20:11 Read Speed (Data/Audio): MAX / MAX
    I 12:20:11 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2228623)
    I 12:20:11 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2228623)
    W 12:30:10 Failed to Read Sector 1707456 - Reason: Unrecovered Read Error
    W 12:30:10 Sector 1707456 maps to File: \MAME 0.130 to 0.131 Update Pack\shangril.zip
    E 12:31:32 Failed to Read Sector 1707456 - Reason: Unrecovered Read Error
    E 12:31:32 Sector 1707456 maps to File: \MAME 0.130 to 0.131 Update Pack\shangril.zip
    E 12:31:32 Failed to Verify Sectors!
    E 12:31:32 Operation Failed! - Duration: 00:11:20
    I 12:31:32 Average Verify Rate: 5,021 KB/s (3.6x) - Maximum Verify Rate: 11,311 KB/s (8.2x)
    I 12:31:39 Close Request Acknowledged
    I 12:31:39 Closing Down...
    I 12:31:40 Shutting down SPTI...
    I 12:31:40 ImgBurn closed!
    


  6. I have an old burner (LG GSA-4120B) and ImgBurn 2.5.2.0. A few days ago, I bought a DVD-R labeled MATRIX 8x with Disc ID TYG02 and tried to burn some files. During the verification, I got an error so I just trashed the disc.

     

    Today, my brother brought me a disc and it turned out to be the same MATRIX 8x TYG02 as they're kinda popular here; he bought it in a different place, though. So I decided to burn the exact same set of files as before and once again I got a verification error, which I thought was a bit weird as I've read good things about discs with an TY ID.

     

    Anyway, here comes the weird thing. I was about to trash this disc when I remembered that the other disc had the verification error on exactly the same ZIP file. I inserted the disc again, browsed to that file and then used 7-Zip's Test archive option and it returned no errors meaning the file was readable. I launched again ImgBurn and used the Verify disc option (without an image, though) and it verified that all sectors were readable.

     

    So, what's going on here? is it maybe due to an aging burner? faulty HDD? disc errors?. And what about the data on the disc? was it burned correctly or not?.

     

    Any comments appreciated. Thanks.


  7. I love the DLE but as of now, if you have the Explorer Panel open and select multiple files/folders, the only way to add them to the project is (correct me if I'm wrong) to drag them into the Disc Layout panel. I was thinking that a button in the toolbar (or perhaps a keyboard shortcut) to add the currently selected files would be handy.

     

    Thanks.


  8. Is it possible to burn a disc so that the actual data is burnt at the outer edge of the disk?.

     

    I'm trying to burn a CD with only ~100 MB of data and I wonder if it's possible to fill the rest of the disc with dummy data or something. I thought the Image Start LBA option would be useful but didn't work as I expected. I tried searching the forum but didn't find anything (searching for something with LBA on it won't return any results as the minimum search term is 4 characters).

     

    So, is it possible? and if so, how is it done?. Also, does it work for bootable CDs?.

     

    I'm using ImgBurn 2.5.2.0.

     

    Thanks in advance.


  9. I no longer plan to use ImgBurn.

    I hope you're happy wasting gigabytes of HDD as well as huge amounts of RAM with other software in order to do the same things you do with ImgBurn.

     

    Also, it's going to be a shame for the ImgBurn community to lose such a valuable user as you are, but don't worry, we'll survive.

     

     

     

    Use the Ask Toolbar and search the forum for other threads that deals with the Ask Toolbar and you'll find it. ;)
    Hah!... this goes to my custom ImgBurn messages.

  10. confirmed by IT admin...

    I verified this in 3 VMs using VMWare.

    Seriously, I guess you're just trolling. Otherwise, you're doing it wrong.

     

    Seriously, you haven't realized this? :blink:

    If you get trigger happy with your mouse clicks, then the ImgBurn installer is not the only one you have to worry about. Same goes to whooaahh.

     

    As LUK! said, having a bit of patience won't hurt.


  11. You need to look for DVD authoring software. I use plain FFmpeg+dvdauthor, but that's definitely not for newbies.

     

    I couldn't read your last post but yes, you have to convert your MOV files to MPEG2. Most authoring software will do that for you.

×

Important Information

By using this site, you agree to our Terms of Use.