Siegfried

Ok, coming back to say my problem pretty much was the crappy ridata disks. I remembered I had one verbatim left, tried to burn it and it completed and verified without any problem. Nothing wrong with imageburn or my pc Just weird that I burned half the pin without much issues (one or two DVDs lost, nothing unexpected due to the grade of the media) and the last 8 disks were pure trash.

Not sure I understand that. Isn't the log the window on the bottom of the image? Think I understand what else do you need, here are the logs for the last burn attempt and verification: ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; sábado, 12 junho 2010, 20:13:42 ; \\****************************************// ; ; I 19:18:33 ImgBurn Version 2.5.1.0 started! I 19:18:33 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 19:18:33 Total Physical Memory: 4.189.680 KB - Available: 2.774.260 KB I 19:18:33 Initialising SPTI... I 19:18:33 Searching for SCSI / ATAPI devices... I 19:18:33 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-4163B A104 (G:) (ATA) I 19:18:33 -> Drive 2 - Info: PIONEER DVD-RW DVR-112D 1.28 (F:) (ATA) I 19:18:33 Found 1 DVD±RW and 1 DVD±RW/RAM! I 19:19:25 Operation Started! I 19:19:25 Source File: D:\sbetta.dvd I 19:19:25 Source File Sectors: 3.827.488 (MODE1/2048) I 19:19:25 Source File Size: 7.838.695.424 bytes I 19:19:25 Source File Volume Identifier: DVD_ROM I 19:19:25 Source File Volume Set Identifier: 356fc000MS UDFBridge I 19:19:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:19:25 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:19:25 Source File File System(s): ISO9660; UDF (1.50) I 19:19:25 Destination Device: [0:0:0] PIONEER DVD-RW DVR-112D 1.28 (F:) (ATA) I 19:19:25 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2,4x) I 19:19:25 Destination Media Sectors: 4.173.824 I 19:19:25 Write Mode: DVD I 19:19:25 Write Type: DAO I 19:19:25 Write Speed: 2,4x I 19:19:25 Link Size: Auto I 19:19:25 Lock Volume: Yes I 19:19:25 Test Mode: No I 19:19:25 OPC: No I 19:19:25 BURN-Proof: Enabled I 19:19:25 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x) I 19:19:25 Advanced Settings - Optimal Writing Speed: No I 19:19:25 Optimal L0 Data Zone Capacity: 1.913.760 I 19:19:25 Optimal L0 Data Zone Method: Copied From Original Disc I 19:19:51 Set L0 Data Zone Capacity Succeeded! I 19:19:51 Filling Buffer... (40 MB) I 19:19:52 Writing LeadIn... I 19:19:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:19:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:19:54 Writing Layer 0... (LBA: 0 - 1913759) I 19:39:46 Writing Layer 1... (LBA: 1913760 - 3827487) I 20:00:10 Synchronising Cache... I 20:00:11 Closing Track... I 20:00:17 Finalising Disc... W 20:00:56 Potential 'WaitImmediateIO' Deferred Error - (53%, 1/3) - Session Fixation Error W 20:00:56 Finalise Disc Failed! - Reason: Session Fixation Error W 20:00:56 Retrying (1 of 3)... I 20:01:25 Exporting Graph Data... I 20:01:25 Graph Data File: C:\Users\Marcello\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-112D_1.28_SÁBADO-12-DE-JUNHO-DE-2010_19-19_RITEK-D01-01_2,4x.ibg I 20:01:25 Export Successfully Completed! I 20:01:25 Operation Successfully Completed! - Duration: 00:41:59 I 20:01:25 Average Write Rate: 3.169 KB/s (2.3x) - Maximum Write Rate: 3.372 KB/s (2.4x) I 20:01:25 Cycling Tray before Verify... W 20:01:35 Waiting for device to become ready... I 20:02:08 Device Ready! I 20:02:08 Operation Started! I 20:02:08 Source Device: [0:0:0] PIONEER DVD-RW DVR-112D 1.28 (F:) (ATA) I 20:02:08 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-D01-01) (Speeds: 2,4x) I 20:02:08 Image File: D:\sbetta.dvd I 20:02:08 Image File Sectors: 3.827.488 (MODE1/2048) I 20:02:08 Image File Size: 7.838.695.424 bytes I 20:02:08 Image File Volume Identifier: DVD_ROM I 20:02:08 Image File Volume Set Identifier: 356fc000MS UDFBridge I 20:02:08 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 20:02:08 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 20:02:08 Image File File System(s): ISO9660; UDF (1.50) I 20:02:08 Read Speed (Data/Audio): MAX / MAX I 20:02:08 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 20:02:08 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 20:02:08 Verifying Layer 0... (LBA: 0 - 1913759) I 20:11:13 Verifying Layer 1... (LBA: 1913760 - 3827487) W 20:11:34 Failed to Read Sector 1913760 - Reason: L-EC Uncorrectable Error W 20:12:28 Retrying (1)... W 20:12:35 Retry Failed - Reason: L-EC Uncorrectable Error W 20:12:44 Retrying (2)... W 20:12:51 Retry Failed - Reason: L-EC Uncorrectable Error W 20:12:55 Failed to Read Sector 1913760 - Reason: L-EC Uncorrectable Error W 20:13:03 Failed to Read Sector 1913761 - Reason: L-EC Uncorrectable Error W 20:13:04 Failed to Read Sector 1913761 - Reason: L-EC Uncorrectable Error I 20:13:08 Abort Request Acknowledged W 20:13:11 Failed to Read Sector 1913762 - Reason: L-EC Uncorrectable Error E 20:13:11 Failed to Read Sector 1913762 - Reason: L-EC Uncorrectable Error E 20:13:11 Failed to Verify Sectors! I 20:13:11 Exporting Graph Data... I 20:13:11 Graph Data File: C:\Users\Marcello\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-112D_1.28_SÁBADO-12-DE-JUNHO-DE-2010_19-19_RITEK-D01-01_2,4x.ibg I 20:13:11 Export Successfully Completed! E 20:13:11 Operation Aborted! - Duration: 00:11:03 I 20:13:11 Average Verify Rate: 5.808 KB/s (4.2x) - Maximum Verify Rate: 10.124 KB/s (7.3x) I 20:13:42 Close Request Acknowledged I 20:13:42 Closing Down... I 20:13:42 Shutting down SPTI... I 20:13:42 ImgBurn closed!

Hey guys, I've been using image burn for ages without any problem at all. Today things started to not work anymore. I've tried 5 times already, disk burns ok but always fails verification when it comes to the second layer. Of course I tried using it and it really can't read the second layer. Here's the error it gives on the verification: Is that from the media? What are my options here? Monday I'll try to buy different media but I don't want to spend money on a new pin from another brand and keep loosing disks. Forgot to tell, image burn and my burner firmware are fully up to date.