Jump to content

Tom Saurus

Members
  • Content Count

    37
  • Joined

  • Last visited

Everything posted by Tom Saurus

  1. Tom Saurus

    Which Version Of ImgBurn Should I Install

    Thank you for this information. Thank you also for the terrific program that you have created.
  2. I recently bought an i5 Windows 7 64 bit computer and it would make sense to download and install the latest version of Imgburn. I was reading about a file that was needed that isn't available because a website has went down that carried it. I remember on my older Windows XP computer I downloaded ImgBurn last fall and it worked fine. Should I download an older version? ImgBurn is a terrific program, I mostly use it put .divx files on a UDF data formatted disc. I like the verify function in ImgBurn and I make a disc image with ImgBurn first and burn that. It is such a terrific program.
  3. I frequently use the UDF mode to put several video files on one dvd to play in my Phillips Divx Player. ImagBurn seems to write it all in alphabetical order and in alot of cases that is for the best. But is there a way to get one file to play ahead of the other files without renaming it to something closer to the beginning of the alphabet?
  4. Tom Saurus

    Building Data DVD: Alphabetical Order

    mmalves: Thank you for the tip. I think I will name my files the same way from now on.
  5. Tom Saurus

    Building Data DVD: Alphabetical Order

    I just tested it out and the Phillips did indeed just put the list in alphabetical order, despite where they may be on the disc. So it is best to rename the files and that way they will play in the order that one perfers.
  6. Tom Saurus

    Building Data DVD: Alphabetical Order

    LIGHTNING UK!: The Phillips has a panel that list the names of the videos files on it, but so far I have experienced that it is in alphabetical order. I sometimes just like to let it play the files and then the Phillips picks the next one in line to play after I am finished watching the first one. If you had a file that you wanted to play first. lets say for example it is the oldest file and there was a file that was a sequel or such, to my experienced so far is that you would have to rename the older file to something that is nearest to the beginning of the alphabet for it to play first. If you had many video clips that were short in length you could put quite a few on one disc and the menu panel only displays 4 files at a time and then you press an arrow to get to the next screen. So having certain files playing in the order you want can come in handy, especially if it came to mp3 or such.
  7. Tom Saurus

    Building Data DVD: Alphabetical Order

    mmalves: Thank you for answering my question. It was kind of you to take the time to do so.
  8. I recently bought a program called Tmpgenc DVD Author 3 and it has the ability to take my mpeg2 files that typically I would be using to create a standard DVD Disc, or I can use it to squeeze about 5 and half hours of footage on the same disc in the Divx Ultra format. With a standalone Divx Ultra Player, I can play these discs. When the program finishes authorizing these files it gives them a .divx extension and then I use ImagBurn to build an ISO image in the UDF format and then use ImagBurn to write this iso to a blank dvd r and then go through the verify process. My suggestion is that "like when ImgBurn finds that the files I am trying to make an ISO of have a video ts and audio ts folder it sends a pop up that recommends I change to ISO 9960/UDF, can the program sense that this is suppose to be a UDF format disc. If one burns a "Divx Ultra" disc in ISO 9960/UDF mode it will not play in a standalone Divx Ultra Player. It must be burned in the UDF file format. Since the majority of the time thus far I authorize my Mpeg2 files to the standard DVD format, I have forgot on one occasion to switch to the UDF format to build the .divx file to an ISO image. Is there some way to program such a thing into a future version of ImgBurn?
  9. Tom Saurus

    Divx Ultra Discs & ImagBurn

    mmalves: I never bothered experimenting much with the technology. I just know that if this divx ultra file is put in any other format other than UDF it won't play in my Phillips 5990 Divx Ultra Player. I can play a .divx ultra file in the VLC Software Media Player, but I can only watch the first track that is on the disc. I hope someone can develop a software player that can access and extract what is inside the .Divx DMF that TDA outputs. That is about all that bothers me about this technology. Sometimes a person needs to extract a scene or two from the DVD's they create and in this format, you can't do that, to my knowledge.
  10. Tom Saurus

    Divx Ultra Discs & ImagBurn

    mmalves: A Divx Ultra Standalone Player will alow you to access .divx and .xvid files that you put on a data disc. But the Divx Ultra Player allows you also to play discs that are in the Divx Ultra format and this format allows you the typical design and functionality of a regular DVD. I am referring to chapters, ect. TDA 3 allows me to chose between making a standard DVD or an Divx Ultra Disc. Having the ability to put more footage onto a disc has its appeals. It is very handy when you want to put eight, 40 minutes episodes on a single disc or fourteen, 23 minute episodes to a single disc. Though you can find freeware programs that will allow you convert mpeg2 files to the xvid format and you can put these on a disc in the data disc format and play them on a divx format, as long as they are compatable with the player.
  11. Tom Saurus

    Ultra Divx File, How To Burn?

    Thank you LIGHTNING UK. I tried that option and had success. Now I can play my Ultra Divx files on my Phillips Ultra Divx Player. I am very pleased with both the program that authorized my files and ImgBurn that built the UDF ISO and burned and verified it successfully.
  12. Tom Saurus

    Ultra Divx File, How To Burn?

    I am testing out a new program that allows one to put menus with divx files for the new Ultra Divx standard. I took the file outputed from Divx Author and used ImgBurn to build a data ISO. The file burned correctly and verified, but my Phillips Ultra Divx Player displayed "Unknown Disc" and wouldn't let me access it. I can access the divx file in VLC Media Player, but no menus are displayed and only the first track shows up. One person mentioned on another forum of burning as a UDF file, I think I can do with ImgBurn. Can someone explain to me about UDF and is that the best way to get Divx Ultra Files to be playable on Ultra Divx Players? Thank you very much for any information you can give me on this matter.
  13. Tom Saurus

    Tayo Yuden's Failing

    I bought some Tayo Yuden 8x DVD+Rs and I have become accustomed to them almost always burning ad then verifying successfully. These are really good quality discs and they seem to have all the indicators engraved in the hub area that they geniune Tayo Yudens. In most cases the DVD's are burning successfully but the verifying process reveals problems and doesn't complete. The company I bought them from is telling me that most likely it is a software or hardware issue on my end. This is getting me worried because I invested in these discs and I believed them to be just about the best on the market. Here is a log: I 17:05:53 ImgBurn Version 2.1.0.0 started! I 17:05:53 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 17:05:53 Initialising SPTI... I 17:05:53 Searching for SCSI / ATAPI devices... I 17:05:53 Found 1 DVD?RW! I 17:06:01 Operation Started! I 17:06:01 Source File: F:\Video Projects\Corrie DVD 90.iso I 17:06:01 Source File Sectors: 1,929,472 (MODE1/2048) I 17:06:01 Source File Size: 3,951,558,656 bytes I 17:06:01 Source File Volume Identifier: CORRIE_DVD_90 I 17:06:01 Source File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER! I 17:06:01 Source File Implementation Identifier: ImgBurn I 17:06:01 Source File File System(s): ISO9660, UDF (1.02) I 17:06:01 Destination Device: [1:0:0] _NEC DVD_RW ND-3500AG 2.16 (D:) (ATA) I 17:06:01 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x) I 17:06:01 Destination Media Sectors: 2,295,104 I 17:06:01 Write Mode: DVD I 17:06:01 Write Type: DAO I 17:06:01 Write Speed: 4x I 17:06:01 Link Size: Auto I 17:06:01 Test Mode: No I 17:06:01 BURN-Proof: Enabled I 17:06:01 Filling Buffer... I 17:06:01 Writing LeadIn... I 17:06:24 Writing Image... I 17:18:03 Synchronising Cache... I 17:18:04 Closing Track... I 17:18:18 Finalising Disc... I 17:18:33 Image MD5: 31617a85fe1e11d0385201d5eb2f6d07 I 17:18:34 Operation Successfully Completed! - Duration: 00:12:32 I 17:18:34 Average Write Rate: 5,520 KB/s (4.0x) - Maximum Write Rate: 5,776 KB/s (4.2x) I 17:18:34 Operation Started! I 17:18:34 Source Device: [1:0:0] _NEC DVD_RW ND-3500AG 2.16 (D:) (ATA) I 17:18:34 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x) I 17:18:34 Image File: F:\Video Projects\Corrie DVD 90.iso I 17:18:34 Image File Sectors: 1,929,472 (MODE1/2048) I 17:18:34 Image File Size: 3,951,558,656 bytes I 17:18:34 Image File Volume Identifier: CORRIE_DVD_90 I 17:18:34 Image File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER! I 17:18:34 Image File Implementation Identifier: ImgBurn I 17:18:34 Image File File System(s): ISO9660, UDF (1.02) I 17:18:34 Verifying Sectors... W 17:24:13 Failed to read Sector 1879392 - No Seek Complete W 17:24:13 Sector 1879392 maps to File: VIDEO_TS\VTS_04_1.VOB E 17:24:21 Failed to read Sector 1879393 - No Seek Complete E 17:24:21 Sector 1879393 maps to File: VIDEO_TS\VTS_04_1.VOB E 17:24:21 Failed to Verify Sectors! E 17:24:22 Operation Failed! - Duration: 00:05:47 I 17:24:22 Average Verify Rate: 10,832 KB/s (7.8x) - Maximum Verify Rate: 20,445 KB/s (14.8x) I use ImageBurn to build an ISO file, and I use it to burn the ISO file. I have some Maxell DVD's and they are burning and verifying to date successfully. I am used to the same with Tayo Yudens. I have had computer problems lately. Apparently my computer is "Underclocking" by 33 percent. I had to get a new motherboard and the technician installed one that has an FSB of 533mhz and my cpu has a FSB of 800mhz. If I right click on my computer it states I have a P4 3.0ghz chip, running at 2.0 Ghz. I usually do alot of other stuff while burning a DVD and I hope that isn't a possible cause for this. I am open to the possibility that my DVD burner is starting to fail. How can one tell if it is? Can anyone figure out anything from that log. I saved a log of a successful burn and verify; would it be a good idea to post it? I hope someone can give me some advice on this situation. Thanks in advance for any information you can give me on this subject.
  14. Tom Saurus

    Tayo Yuden's Failing

    Update: I got my other computer today. It has a Pioneer DVD Burner. I burned a disc and here are some results: Image Burn Log: I 07:23:26 ImgBurn Version 2.1.0.0 started! I 07:23:26 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 07:23:26 Initialising SPTI... I 07:23:26 Searching for SCSI / ATAPI devices... I 07:23:26 Found 1 DVD?RW! I 07:24:15 Operation Started! I 07:24:15 Source File: C:\Two Pints Series 03 Disc 01.iso I 07:24:15 Source File Sectors: 2,034,768 (MODE1/2048) I 07:24:15 Source File Size: 4,167,204,864 bytes I 07:24:15 Source File Volume Identifier: TWO_PINTS_SERIES_03__DISC_01 I 07:24:15 Source File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER! I 07:24:15 Source File Implementation Identifier: ImgBurn I 07:24:15 Source File File System(s): ISO9660, UDF (1.02) I 07:24:15 Destination Device: [0:0:0] PIONEER DVD-RW DVR-111D 1.23 (D:) (ATA) I 07:24:15 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 4x, 6x, 8x, 12x) I 07:24:15 Destination Media Sectors: 2,295,104 I 07:24:15 Write Mode: DVD I 07:24:15 Write Type: DAO I 07:24:15 Write Speed: 4x I 07:24:15 Link Size: Auto I 07:24:15 Test Mode: No I 07:24:15 BURN-Proof: Enabled I 07:24:15 Filling Buffer... I 07:24:16 Writing LeadIn... I 07:24:34 Writing Image... I 07:37:09 Synchronising Cache... I 07:37:10 Closing Track... I 07:37:12 Finalising Disc... I 07:38:07 Image MD5: da5afd4eb9a84904bd10452dbf10cd58 I 07:38:07 Operation Successfully Completed! - Duration: 00:13:51 I 07:38:07 Average Write Rate: 5,397 KB/s (3.9x) - Maximum Write Rate: 5,592 KB/s (4.0x) I 07:38:07 Cycling Tray before Verify... I 07:38:25 Device Ready! I 07:38:25 Operation Started! I 07:38:25 Source Device: [0:0:0] PIONEER DVD-RW DVR-111D 1.23 (D:) (ATA) I 07:38:25 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: YUDEN000-T02-00) (Speeds: 4x, 6x, 8x, 12x) I 07:38:25 Image File: C:\Two Pints Series 03 Disc 01.iso I 07:38:25 Image File Sectors: 2,034,768 (MODE1/2048) I 07:38:25 Image File Size: 4,167,204,864 bytes I 07:38:25 Image File Volume Identifier: TWO_PINTS_SERIES_03__DISC_01 I 07:38:25 Image File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER! I 07:38:25 Image File Implementation Identifier: ImgBurn I 07:38:25 Image File File System(s): ISO9660, UDF (1.02) I 07:38:25 Verifying Sectors... I 07:44:21 Device MD5: da5afd4eb9a84904bd10452dbf10cd58 I 07:44:21 Image MD5: da5afd4eb9a84904bd10452dbf10cd58 I 07:44:21 Operation Successfully Completed! - Duration: 00:05:56 I 07:44:21 Average Verify Rate: 11,431 KB/s (8.3x) - Maximum Verify Rate: 16,515 KB/s (11.9x) Here is some text from a scan by Nero: General Information Drive: PIONEER DVD-RW DVR-111D Firmware: 1.23 Disc: DVD+R (YUDEN000 T02) Selected speed: 8 X PI errors Maximum: 58 Average: 17.06 Total: 186552 PI failures Maximum: 28 Average: 0.06 Total: 440 PO failures: n/a Jitter: n/a Scanning Statistics Elapsed time: 25:21 Number of samples: 15895 Average scanning interval: 8.00 ECC Glitches removed: 0 The Scan Disc test in Nero indicated not one single error. I image these PI Failures and Errors probably mean something significant; but at the moment I am accepting this as a good burn and taking comfort in that.
  15. Tom Saurus

    Tayo Yuden's Failing

    volvofl10: I have bought several spindles of dvd's since this problem with the Taiyo Yuden's failing. Other brands of discs have failed as well. A local computer technician is building me a computer as soon as I fork over the check. It is going to have a E6400 Dual Core CPU and a Pioneer Burner in it. If I still have failures then I think I might just give up on computing. Since if you have good quality discs, a good quality computer and things still don't turn out, then it is pretty much a waste of time to keep continuing to pour money into the effort. Thank you for your input. Ifcrule1972: My friend thought these discs might save him some money, and I know they don't have a good media code to them, but I have had as much success with them as I have had with my geniune Taiyo Yudens. I am kind of perplexed over the whole situation. Thank you for your input. I don't know what this means but lately I have noticed that sometimes on a successful burn that during the verify stage, that the drive when it is reading the burn, is will slow way down even as low as 0.0 and then gradually build itself up again to 4.5 and 11.0, ect until it is finally finished. I checked this discs with the nero error checking program, and the disc has no errors, but it seems it hits a point and it slows down as well, until it has got passed that spot and then builds up its speed again to reveal no errors on the disc.
  16. Tom Saurus

    Burned & Verified Discs Saying They're Blank

    illini4life: When you burn your discs and after the verifying process is finished, and you have pressed "OK", does the display on the left that comes up with the disc information say that the disc is completed. I have a few burn lately where they have burned, and even verified, but it says in the display panel that the disc is incomplete, even though the log indicated that the disc was closed and finalized. These discs sometimes will play in a dvd settop box, but the dvd drive in the computer indicates that they are blank. It would be wise not to delete your files after a burn, even if it has verified, if you notice on the display panel it says the disc is incomplete.
  17. Tom Saurus

    Tayo Yuden's Failing

    I now have 21B installed. I just burned an ISO to a Maxell Disc manufactured by Ritek and it turned out successfully. Thank you Kenadjian, dontasciime and polopony for the information you have provided. I am relieved that now I can put stuff on the Ritek Discs for my friend as well and the Taiyo Yudens I have purchased for my own use.
  18. Tom Saurus

    Tayo Yuden's Failing

    dontasciime: I downloaded 21A and the computer accepted it. According to ImagBurn I have 21A as my firmware. Thank you for your help on this issue. Here is some information about the Maxell Discs, my friend bought them in a store and they are obviously made by Ritek. I have been able to place stuff on these discs in the past, but due to the Disc ID, I am now having problems. I am going to try 21B again, but if it still doesn't like these discs, I won't be able to write data to them. Here is the information from ImagBurn: _NEC DVD_RW ND-3500AG 2.1A (ATA) Current Profile: DVD-R Disc Information: Status: Empty Erasable: No Free Sectors: 2,297,888 Free Space: 4,706,074,624 bytes Free Time: 510:40:38 (MM:SS:FF) Supported Write Speeds: 2x, 4x, 6x, 8x, 12x Pre-recorded Information: Manufacturer ID: RITEKF1 Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,495,103 Last Physical Sector in Layer 0: 0 Last time I tried writing to this type of disc, the burner wouldn't even complete the lead in before it rejected it. It said something like this disc type is not supported.
  19. Tom Saurus

    Tayo Yuden's Failing

    I updated the firmware to 2.06 and I shouldn't have. Now my burner doesn't recognize the Maxell Discs that I use to put my friend's stuff on. These are Maxell Discs manufactured by Ritek, and now I have about 40 discs that can't be recognized by the burner. I tried installing the 2.1B firmware and I can't do it, it says it can't find the drive. I don't know how to get out of this mess. Thanks in advance to anyone that can give me some advice on how to get back to the 2.1B firmware.
  20. Tom Saurus

    Tayo Yuden's Failing

    Here is the log: I 12:31:32 ImgBurn Version 2.1.0.0 started! I 12:31:32 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 12:31:32 Initialising SPTI... I 12:31:32 Searching for SCSI / ATAPI devices... I 12:31:32 Found 1 DVD?RW! I 12:31:38 Operation Started! I 12:31:38 Source File: F:\Video Projects\Movie DVD 1219.iso I 12:31:38 Source File Sectors: 1,435,632 (MODE1/2048) I 12:31:38 Source File Size: 2,940,174,336 bytes I 12:31:38 Source File Volume Identifier: MOVIE_DVD_1219 I 12:31:38 Source File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER! I 12:31:38 Source File Implementation Identifier: ImgBurn I 12:31:38 Source File File System(s): ISO9660, UDF (1.02) I 12:31:38 Destination Device: [1:0:0] _NEC DVD_RW ND-3500AG 2.1B (D:) (ATA) I 12:31:38 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x) I 12:31:38 Destination Media Sectors: 2,295,104 I 12:31:38 Write Mode: DVD I 12:31:38 Write Type: DAO I 12:31:38 Write Speed: 8x I 12:31:38 Link Size: Auto I 12:31:38 Test Mode: No I 12:31:38 BURN-Proof: Enabled I 12:31:39 Filling Buffer... I 12:31:40 Writing LeadIn... I 12:32:00 Writing Image... I 12:40:26 Synchronising Cache... I 12:40:27 Closing Track... I 12:40:41 Finalising Disc... I 12:40:56 Image MD5: 2e8e8f1a702f53235fe94150989eecc4 I 12:40:57 Operation Successfully Completed! - Duration: 00:09:18 I 12:40:57 Average Write Rate: 5,674 KB/s (4.1x) - Maximum Write Rate: 8,638 KB/s (6.2x) I 12:40:57 Cycling Tray before Verify... I 12:41:25 Device Ready! I 12:41:25 Operation Started! I 12:41:25 Source Device: [1:0:0] _NEC DVD_RW ND-3500AG 2.1B (D:) (ATA) I 12:41:25 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x) I 12:41:25 Image File: F:\Video Projects\Movie DVD 1219.iso I 12:41:25 Image File Sectors: 1,435,632 (MODE1/2048) I 12:41:25 Image File Size: 2,940,174,336 bytes I 12:41:25 Image File Volume Identifier: MOVIE_DVD_1219 I 12:41:25 Image File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER! I 12:41:25 Image File Implementation Identifier: ImgBurn I 12:41:25 Image File File System(s): ISO9660, UDF (1.02) I 12:41:25 Verifying Sectors... I 12:45:09 Device MD5: 2e8e8f1a702f53235fe94150989eecc4 I 12:45:09 Image MD5: 2e8e8f1a702f53235fe94150989eecc4 I 12:45:09 Operation Successfully Completed! - Duration: 00:03:44 I 12:45:09 Average Verify Rate: 12,818 KB/s (9.3x) - Maximum Verify Rate: 17,123 KB/s (12.4x) Here is what the display panel in ImagBurn says about the disc, once it has been written and verified: _NEC DVD_RW ND-3500AG 2.1B (ATA) Current Profile: DVD+R Disc Information: Status: Incomplete Erasable: No Sessions: 1 Free Sectors: 854,352 Free Space: 1,749,712,896 bytes Free Time: 189:53:27 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x Physical Format Information (ADIP): Disc ID: YUDEN000-T02-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 This has me concerned; as I like my disc to be acessable on my computer at a later date, incase I need to copy the disc or put the data back on the hard drive. Thank you in advance for whatever information you can give me concerning this matter.
  21. Tom Saurus

    Tayo Yuden's Failing

    A New Wrinkle Has Developed: I seem to be able to write and verify the DVD, and the program says it has completed the task successfully, then when a person presses OK, it is revealed in the disc information box that the disc is Incomplete. A person can play the DVD in there DVD player, but the computer drive says that there is nothing on the disc. Does anyone have a clue what is going on? The name I gave the ISO doesn't even show up when I go to my computer, when I look at the icon for the DVD drive, that is when ImagBurn says the disc is incomplete.
  22. I like to use ImageBurn to make Data Discs. I am used to using Nero to make Data Discs, and what I like is that I have a record of what I put on the Data Disc other than the Data Disc itself. Is there a way to keep a record of what one put on a disc, if used ImagBurn to build a data disc iso. See when I make projects in Nero, I save the project and I click on that at a later date and see exactly what files I put on that disc and that sometimes can come in handy.
  23. Tom Saurus

    Tayo Yuden's Failing

    lfcrule1972: I haven't had the fresh install done yet. I am saving for a new computer to take some of the burden off my existing one. Once I have it up and running, and have everything backed up off of the C Drive, I will have the technician do a re-install of Windows XP Pro. Kenadjian: Most of the time I was getting discs that would burn but fail during the verify stage. I did have one failed burn last night even after restarting the computer, but the disc only had a slight flaw and I sat down and watched it. I was able to have three successful burns this morning, so I am hoping the failure after restarting was just an isolated incident. I am hoping I will be able to get the second computer built soon, and have this one worked on and perhaps I will get many more years out of it.
  24. Tom Saurus

    Better Record Keeping For Data Discs

    zacoz: Thank you for the information you provided. I gave it a try and it does indeed display in the text file what files I put on the data disc.
  25. Tom Saurus

    Tayo Yuden's Failing

    Update: I am getting a new burner soon. But I thought I would mention that if I restart my computer just prior to burning a dvd, I am having alot of success with the Taiyo Yudens. I don't understand why, but the discs are burning and verify successfully, if I restart the computer just before burning.
×

Important Information

By using this site, you agree to our Terms of Use.