fireguy15

I am trying to take a re-authored (using DVD Shrink) scene from on of my back ups to put into a power point as a video file. However once I did a build and saved the ISO file to my hard drive, Power Point does not recognize the format. Is there any way to change the formatting for this to work?

That was it!!!!!!!!!!!!!!!!!!!!!!! I can't thank you guys enough for all of your help.

OK, I keep looking all over the place to find out if this drive will support bitsetting/booktyping, do you have any suggestions on how to find out? Second, if I find out it does, what settings do I change, if any?

I updated the firmware and made sure to verify. However, I have the same issue. I understand your recomendation in regards to quality media, however how can the same media work fine on all players when it comes out of my old system? Is there a difference in the burning format based on the DVD+RW in the computer? I am a completly newbie to all of this. When things don't quite work I get a little lost. Thank you for all your help. Here is the log of the last attempt: I 16:45:15 ImgBurn Version 2.1.0.0 started! I 16:45:15 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 16:45:16 Initialising SPTI... I 16:45:16 Searching for SCSI / ATAPI devices... I 16:45:16 Found 1 DVD?RW! I 16:45:40 Operation Started! I 16:45:40 Source File: C:\CORE_FF.ISO.ISO I 16:45:40 Source File Sectors: 2,285,873 (MODE1/2048) I 16:45:40 Source File Size: 4,681,467,904 bytes I 16:45:40 Source File Volume Identifier: CORE_FF I 16:45:40 Source File Implementation Identifier: DVD Shrink I 16:45:40 Source File File System(s): ISO9660, UDF (1.02) I 16:45:40 Destination Device: [1:0:0] SONY DVD+-RW DW-Q58A UDS2 (D:) (ATA) I 16:45:40 Destination Media Type: DVD+R (Disc ID: CMC MAG-R01-00) (Speeds: 2.4x) I 16:45:40 Destination Media Sectors: 2,295,104 I 16:45:40 Write Mode: DVD I 16:45:40 Write Type: DAO I 16:45:40 Write Speed: 2.4x I 16:45:40 Link Size: Auto I 16:45:40 Test Mode: No I 16:45:40 BURN-Proof: Enabled I 16:45:41 Filling Buffer... I 16:45:42 Writing LeadIn... I 16:46:08 Writing Image... I 17:08:58 Synchronising Cache... I 17:08:59 Closing Track... I 17:09:23 Finalising Disc... I 17:09:52 Image MD5: 351e6a3332b4b06edd8290cc1db96881 I 17:09:52 Operation Successfully Completed! - Duration: 00:24:11 I 17:09:52 Average Write Rate: 3,339 KB/s (2.4x) - Maximum Write Rate: 3,465 KB/s (2.5x) I 17:09:52 Cycling Tray before Verify... W 17:09:56 Waiting for device to become ready... I 17:10:12 Device Ready! I 17:10:12 Operation Started! I 17:10:12 Source Device: [1:0:0] SONY DVD+-RW DW-Q58A UDS2 (D:) (ATA) I 17:10:12 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: CMC MAG-R01-00) (Speeds: 2.4x) I 17:10:12 Image File: C:\CORE_FF.ISO.ISO I 17:10:12 Image File Sectors: 2,285,873 (MODE1/2048) I 17:10:12 Image File Size: 4,681,467,904 bytes I 17:10:12 Image File Volume Identifier: CORE_FF I 17:10:12 Image File Implementation Identifier: DVD Shrink I 17:10:12 Image File File System(s): ISO9660, UDF (1.02) I 17:10:12 Verifying Sectors... I 17:29:41 Device MD5: 351e6a3332b4b06edd8290cc1db96881 I 17:29:41 Device (Padded) MD5: 8c5fe94aaa8a0539d8db3126209fce5c I 17:29:41 Image MD5: 351e6a3332b4b06edd8290cc1db96881 I 17:29:42 Operation Successfully Completed! - Duration: 00:19:29 I 17:29:42 Average Verify Rate: 3,910 KB/s (2.8x) - Maximum Verify Rate: 5,697 KB/s (4.1x)

I understand about DVD Dec. Thank you for your help with this issue with ImgBurn. Media is way to expensive to keep making coasters. I 15:45:12 ImgBurn Version 2.1.0.0 started! I 15:45:12 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 15:45:12 Initialising SPTI... I 15:45:12 Searching for SCSI / ATAPI devices... I 15:45:12 Found 1 DVD?RW! I 15:50:00 Operation Started! I 15:50:00 Source File: C:\CORE_FF.ISO.ISO I 15:50:00 Source File Sectors: 2,285,873 (MODE1/2048) I 15:50:00 Source File Size: 4,681,467,904 bytes I 15:50:00 Source File Volume Identifier: CORE_FF I 15:50:00 Source File Implementation Identifier: DVD Shrink I 15:50:00 Source File File System(s): ISO9660, UDF (1.02) I 15:50:00 Destination Device: [1:0:0] SONY DVD+-RW DW-Q58A UDS1 (D:) (ATA) I 15:50:00 Destination Media Type: DVD+R (Disc ID: RICOHJPN-R03-04) (Speeds: 2.4x, 4x, 6x, 8x) I 15:50:00 Destination Media Sectors: 2,295,104 I 15:50:00 Write Mode: DVD I 15:50:00 Write Type: DAO I 15:50:00 Write Speed: 8x I 15:50:00 Link Size: Auto I 15:50:00 Test Mode: No I 15:50:00 BURN-Proof: Enabled I 15:50:01 Filling Buffer... I 15:50:02 Writing LeadIn... I 15:50:53 Writing Image... I 16:01:57 Synchronising Cache... I 16:01:58 Closing Track... I 16:02:06 Finalising Disc... I 16:02:43 Image MD5: 351e6a3332b4b06edd8290cc1db96881 I 16:02:43 Operation Successfully Completed! - Duration: 00:12:42 I 16:02:43 Average Write Rate: 6,885 KB/s (5.0x) - Maximum Write Rate: 11,316 KB/s (8.2x) I 16:02:43 Cycling Tray before Verify... W 16:02:48 Waiting for device to become ready...

I was a long time user of DVD Decrypter on my old Dell System. When it decided to take a dive I copied all of my software, DVD Decrpter, DVD shrink onto the new system. Now when I try to run things I get coasters. I have verified that all settings are identical between the 2 systems but I keep getting DVDs that will auto run on my computer and some of my older DVD players, but the new ones keep coming up with Unable to Read Disc. What settings could I have wrong. The DVD+R Media is the same but I get different results from each computer. The DVD's off the old one works, the DVDs off the new one doesn't.