HTNUTS
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by HTNUTS
-
-
I've been making copys of my new discs using Shrink (v3.2) and Imgburn (v2.3). I usually rip to a iso file that I designate to my desktop. From there I drag it into Imgburn set in the 'write' mode. Once I insert a blank disc (Verbatim) and click on little burn icon, it automatically starts the process. I never have a choice of layer break point. As a result, I'm freezing at most of my break points.
Any help would be most appreciated. Below is my latest copy that froze up.
I 15:41:03 ImgBurn Version 2.2.0.0 started!
I 15:41:03 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 15:41:03 Total Physical Memory: 1,047,556 KB - Available: 583,692 KB
I 15:41:03 Initialising SPTI...
I 15:41:03 Searching for SCSI / ATAPI devices...
I 15:41:03 Found 1 DVD-ROM and 1 DVD?RW!
I 15:42:04 Operation Started!
I 15:42:04 Source File: C:\Documents and Settings\Mark\Desktop\HAPPY_FEET.ISO
I 15:42:04 Source File Sectors: 3,226,154 (MODE1/2048)
I 15:42:04 Source File Size: 6,607,163,392 bytes
I 15:42:04 Source File Volume Identifier: HAPPY_FEET
I 15:42:04 Source File Implementation Identifier: DVD Shrink
I 15:42:04 Source File File System(s): ISO9660, UDF (1.02)
I 15:42:04 Destination Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA)
I 15:42:04 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 15:42:04 Destination Media Sectors: 4,173,824
I 15:42:04 Write Mode: DVD
I 15:42:04 Write Type: DAO
I 15:42:04 Write Speed: 3x
I 15:42:04 Link Size: Auto
I 15:42:04 Test Mode: No
I 15:42:04 BURN-Proof: Enabled
W 15:42:09 Optimal L1 Data Zone Start LBA: None Found! (VTS_01)
I 15:42:09 Optimal L0 Data Zone Capacity: 1,613,440
I 15:42:09 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary
I 15:42:36 Filling Buffer... (20 MB)
I 15:42:37 Writing LeadIn...
I 15:42:38 Writing Image...
I 15:42:38 Writing Layer 0... (LBA: 0 - 1613439)
I 15:58:47 Writing Layer 1... (LBA: 1613440 - 3226153)
I 16:15:26 Synchronising Cache...
I 16:15:27 Closing Track...
I 16:15:48 Finalising Disc...
I 16:16:40 Image MD5: 5d80a37329de2b7b2ebafbb18e22c151
I 16:16:41 Operation Successfully Completed! - Duration: 00:34:36
I 16:16:41 Average Write Rate: 3,280 KB/s (2.4x) - Maximum Write Rate: 3,465 KB/s (2.5x)
I 16:16:41 Cycling Tray before Verify...
I 16:17:07 Device Ready!
I 16:17:07 Operation Started!
I 16:17:07 Source Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA)
I 16:17:07 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 16:17:07 Image File: C:\Documents and Settings\Mark\Desktop\HAPPY_FEET.ISO
I 16:17:07 Image File Sectors: 3,226,154 (MODE1/2048)
I 16:17:07 Image File Size: 6,607,163,392 bytes
I 16:17:07 Image File Volume Identifier: HAPPY_FEET
I 16:17:07 Image File Implementation Identifier: DVD Shrink
I 16:17:07 Image File File System(s): ISO9660, UDF (1.02)
I 16:17:07 Read Speed: 10x
W 16:17:07 [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) - Selected Read Speed: 13,850 KB/s (10x)
W 16:17:07 [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) - Actual Read Speed: 11,080 KB/s (8x)
I 16:17:07 Verifying Sectors... (LBA: 0 - 3226153)
I 16:34:06 Device MD5: 5d80a37329de2b7b2ebafbb18e22c151
I 16:34:06 Device (Padded) MD5: 963a4de37e7f74d29b325c33379b87e8
I 16:34:06 Image MD5: 5d80a37329de2b7b2ebafbb18e22c151
I 16:34:07 Operation Successfully Completed! - Duration: 00:16:59
I 16:34:07 Average Verify Rate: 6,332 KB/s (4.6x) - Maximum Verify Rate: 9,321 KB/s (6.7x)
I 16:35:34 Close Request Acknowledged
I 16:35:34 Closing Down...
I 16:35:35 Shutting down SPTI...
I 16:35:35 ImgBurn closed!
-
have you got 2 instances of imgburn open?
Cornholio7, You were absolutely right. I must have had 2 of Imgburns open. I must of had the forum sitting on my taskbar. Anyhow, I started
from scratch with only the one I was using, and low and behold it worked flawlessly. Thanks a million
-
have you got 2 instances of imgburn open?
no
-
I went to sysinternals.com, went through the process to find this:
Imgburn 1212 Handle\Device\cdrom0
Imgburn 2836 Handle\Devise\cdrom0
-
wanted a copy of my new 'Open Season' DVD. I couldn't open it in Shrink, so I made an iso
in DVDFab. When I tried to open in Imgburn, I received a error message:
DeviceIoControl (FSCTL_Lock_Volume) Failed!
Device [1:0:0] memorex 16x-DDL-IN 1.A3 (D:) (ATA)
Unable to lock volume for exclusive access
Reason: Access is Denied
I 20:18:39 ImgBurn Version 2.1.0.0 started!
I 20:18:39 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 20:18:39 Initialising SPTI...
I 20:18:39 Searching for SCSI / ATAPI devices...
I 20:18:39 Found 1 DVD?RW!
I 20:20:04 Operation Started!
I 20:20:04 Source File: C:\Documents and Settings\Mark\Desktop\OPEN_SEASON33.ISO
I 20:20:04 Source File Sectors: 3,156,245 (MODE1/2048)
I 20:20:04 Source File Size: 6,463,989,760 bytes
I 20:20:04 Source File Volume Identifier: OPEN_SEASON
I 20:20:04 Source File Implementation Identifier: DVD Shrink
I 20:20:04 Source File File System(s): ISO9660, UDF (1.02)
I 20:20:04 Destination Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA)
I 20:20:04 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)
I 20:20:04 Destination Media Sectors: 4,173,824
I 20:20:04 Write Mode: DVD
I 20:20:04 Write Type: DAO
I 20:20:04 Write Speed: 2.4x
I 20:20:04 Link Size: Auto
I 20:20:04 Test Mode: No
I 20:20:04 BURN-Proof: Enabled
E 20:24:42 Failed to lock volume for exclusive access.
E 20:24:42 Reason: Access is denied.
E 20:24:42 Operation Aborted! - Duration: 00:04:37
I 20:24:42 Average Write Rate: N/A - Maximum Write Rate: N/A
Any thoughts??? Thanks in advance
-
You're trying to load the image into 'Build' mode, that's not how it works!
Switch to 'Write' mode and try again.
I was hoping you'd come to my rescue UK, Thanks. Changing the mode from build to write brings the file into Imgburn, but everything is basically greyed out
so I can't established a location for a layerbreak. The "WRITE" icons on the bottom left are also greyed out.
Sorry I forgot to insert a blank DVD. I don't see the calculator to establish layerbreak. Thanks
Answered my own question, just hit the "write" icon
-
You're trying to load the image into 'Build' mode, that's not how it works!
Switch to 'Write' mode and try again.
I was hoping you'd come to my rescue UK, Thanks. Changing the mode from build to write brings the file into Imgburn, but everything is basically greyed out
so I can't established a location for a layerbreak. The "WRITE" icons on the bottom left are also greyed out.
Sorry I forgot to insert a blank DVD. I don't see the calculator to establish layerbreak. Thanks
-
You're trying to load the image into 'Build' mode, that's not how it works!
Switch to 'Write' mode and try again.
I was hoping you'd come to my rescue UK, Thanks. Changing the mode from build to write brings the file into Imgburn, but everything is basically greyed out
so I can't established a location for a layerbreak. The "WRITE" icons on the bottom left are also greyed out.
-
I"ve just created an iso file of "The Ant Bully" using DVDshrink/Imgburn. The file locates on my desktop. When I click on the backup icon in Shrink
I have it set to "iso image file and burn with Imgburn" as the target backup. I have the target image file as THE_ANT_BULLY.ISO being sent to the desktop. Do
I have that setup right? Because when I drag it into Imgburn, I get an error message "cannot add file to image" because file exceeds size limit imposed by the
iso9660 file system.
My Verbatim DL's are running low..Where??
in Chat
Posted
Where are you guys buying your blank discs. Any suggestions on where I can buy Verbatims dual layer blanks at a reasonable price?
Thanks in advance