Kevin578

I think it finished verifying. It burned the disk, and then verified it before showing the "operation successfully completed" message. I didn't click ok, but it should still work right?

If I burn an iso, and got to the message saying "operation successfully completed", but shut down the computer before click "ok", and closing imgburn, will the disk still function correctly?

Ok, here is the imgburn log. Both programs show power calibration error. Do you think it's my burner? Should I try it on another computer? Can I still use the same DVD? I think the program was at 17% burning. When I insert it to my computer, it still shows blank cd. If I did a simulation burn, could I use the dvd again in case of an error? ;//****************************************\\ ; ImgBurn Version 2.3.2.0 - Log ; Wednesday, 19 December 2007, 21:01:31 ; \\****************************************// ; ; I 20:41:01 ImgBurn Version 2.3.2.0 started! I 20:41:01 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 20:41:01 Total Physical Memory: 1,572,204 KB - Available: 949,000 KB I 20:41:01 Initialising SPTI... I 20:41:01 Searching for SCSI / ATAPI devices... I 20:41:01 Found 3 DVD-ROMs and 1 DVD±RW! I 20:46:27 Operation Started! I 20:46:27 Source File: C:\Documents and Settings\Kevin\My Documents\ISO IMAGE.iso I 20:46:27 Source File Sectors: 1,601,696 (MODE1/2048) I 20:46:27 Source File Size: 3,280,273,408 bytes I 20:46:27 Source File Implementation Identifier: DVD-ROM GENERATOR I 20:46:27 Source File File System(s): ISO9660, UDF (1.02) I 20:46:27 Destination Device: [1:0:0] SONY DVD RW DW-U14A 2.0c (D:) (ATA) I 20:46:27 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 1x, 2x, 4x) I 20:46:27 Destination Media Sectors: 2,297,888 I 20:46:27 Write Mode: DVD I 20:46:27 Write Type: DAO I 20:46:27 Write Speed: 8x I 20:46:27 Link Size: Auto I 20:46:27 Test Mode: No I 20:46:27 BURN-Proof: Enabled I 20:46:28 Filling Buffer... (40 MB) I 20:46:34 Writing LeadIn... W 20:47:19 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error W 20:47:19 Retrying (1 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (2 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (3 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (4 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (5 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (6 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (7 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (8 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (9 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (10 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (11 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (12 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (13 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (14 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (15 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (16 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (17 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (18 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (19 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:19 Retrying (20 of 20)... W 20:47:19 Retry Failed - Invalid Field in CDB W 20:47:27 Retrying (21)... W 20:47:27 Retry Failed - Invalid Field in CDB W 20:47:32 Retrying (22)... W 20:47:32 Retry Failed - Invalid Field in CDB W 20:47:41 Retrying (23)... W 20:47:41 Retry Failed - Invalid Field in CDB E 20:47:43 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error I 20:47:43 Synchronising Cache...

I wanted to burn an ISO from an image to a disk. In the process, there was an error, I think it was "power calibration". I tried again on Nero, but still got the same error. How can I fix this? Here is a saved log from Nero Kevin Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.2.8.0 Internal Version: 8, 2, 8, 0 Recorder: <SONY DVD RW DW-U14A> Version: 2.0c - HA 1 TA 0 - 8.2.8.0 Adapter driver: <IDE> HA 1 Drive buffer : 8192kB Bus Type : default CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 8.2.8.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-U14A atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On CdRomPeripheral : UH3237R OHF407P 1.0 an1fix8a Port 2 ID 0 DMA: Off CdRomPeripheral : FvFx FVXSCSI Port 3 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DW-U14A D: CdRom0 HL-DT-ST DVD-ROM GDR8162B E: CdRom1 UH3237R OHF407P F: CdRom2 FvFx CDDVDvx+tech-200 G: CdRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1535MB (1572204kB) Free physical memory: 1027MB (1052172kB) Memory in use : 33 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.12.2007 Burn DVD Image 10:04:33 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:04:33 PM #2 Text 0 File Burncd.cpp, Line 3502 Turn on Disc-At-Once, using DVD media 10:04:34 PM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1601695 (355:55.70, 3128MB) 10:04:34 PM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:04:34 PM #5 Text 0 File DlgWaitCD.cpp, Line 2957 Recorder: SONY DVD RW DW-U14A, Media type: DVD-R Disc Manufacturer ID: <MCC 03> <RG20 > Disc Application Code: 64, Disc Physical Code: 193 10:04:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:04:34 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 762 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1601696 (1601696) = #1601696/355:55.71 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1601696 blocks [D: SONY DVD RW DW-U14A] -------------------------------------------------------------- 10:04:34 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 964 Prepare [D: SONY DVD RW DW-U14A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3280273408, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1601696 | 1601696 | 0x00 1601696 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:04:34 PM #9 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:04:34 PM #10 Text 0 File Burncd.cpp, Line 4288 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 10:04:34 PM #11 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 10:04:34 PM #12 Text 0 File Burncd.cpp, Line 4407 Cache writing successful. 10:04:34 PM #13 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 10:04:34 PM #14 Phase 28 File dlgbrnst.cpp, Line 1767 Speed measurement started 10:04:34 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2681 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:04:34 PM #16 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 10:08:04 PM #17 Text 0 File WriterStatus.cpp, Line 240 <D: SONY DVD RW DW-U14A> start writing Lead-Out at LBA 1601696 (1870A0h), length 0 blocks 10:08:04 PM #18 Phase 29 File dlgbrnst.cpp, Line 1716 Speed measurement completed: 11x (15,250 KB/s) 10:08:04 PM #19 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 4x (5,540 KB/s) 10:08:05 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2681 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:08:05 PM #21 Text 0 File DVDR.cpp, Line 3273 Recording mode: Sequential Recording Mode 10:08:05 PM #22 Text 0 File DVDR.cpp, Line 3427 Start write address at LBA 0 DVD high compatibility mode: Yes 10:08:05 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 197 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01 Buffer x07bd0200: Len x648 10:08:05 PM #24 Text 0 File Cdrdrv.cpp, Line 10140 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) Outer Limit of Data Recordable Area: 0 h Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: - Revision number of minimum recording speed: - Revision number table of recording speed: - - - - - - - Class: 0, Extended part version: 0 Start PSN of the Extra Border Zone: 0 h Start PSN of Physical format information blocks in Extra Border Zone: 0 h Media Specific [16..783]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:08:05 PM #25 Text 0 File DVDR.cpp, Line 3565 Reserved Track size: 1601696 (1870A0h, 3128MB) -> return code 0 10:08:05 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 10:08:11 PM #27 Text 0 File Cdrdrv.cpp, Line 1402 22:08:11.984 - D: SONY DVD RW DW-U14A : Queue again later 10:08:56 PM #28 SPTI -1106 File SCSIPassThrough.cpp, Line 197 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) CDB Data: 0x2A 00 00 00 08 C0 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 Sense Area: 0xF1 00 03 FF FD 00 00 12 00 00 00 00 73 03 Buffer x097111c0: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10:08:56 PM #29 CDR -1106 File Writer.cpp, Line 306 Power calibration error D: SONY DVD RW DW-U14A 10:08:57 PM #30 Text 0 File DVDR.cpp, Line 3833 EndDAO: Last written address was 2239 (8BFh) 10:08:57 PM #31 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 4x (5,540 KB/s) 10:08:57 PM #32 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:09:00 PM #33 Text 0 File Cdrdrv.cpp, Line 11391 DriveLocker: UnLockVolume completed 10:09:01 PM #34 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Can anyone tell me what each mode does? Read, Build, Write, Verify, Discovery?