Jump to content

anthojoe

Members
  • Content Count

    13
  • Joined

  • Last visited

About anthojoe

  • Rank
    ISF Newbie
  1. anthojoe

    Help with this error message please

    GREAT SUCCESS! Thanks to everyone who helped me resolve this. Turned out to be very simple indeed.
  2. anthojoe

    Help with this error message please

    Chewy - followed ur instructions and downloaded the 1653 csot and so far so good, 75% done and my burn lights are on. another 10 mins and I'll know if it worked. Thank you for all your help
  3. anthojoe

    Help with this error message please

    LITE-ON DVDRW SOHW-1653S CS0T (ATA) Current Profile: DVD-R Disc Information: Status: Empty Erasable: No Free Sectors: 2,297,888 Free Space: 4,706,074,624 bytes Free Time: 510:40:38 (MM:SS:FF) Supported Write Speeds: 1x, 2x, 4x, 6x, 8x, 12x Pre-recorded Information: Manufacturer ID: ProdiscF02 Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0
  4. anthojoe

    CodeGuys Mirror for all of you in need

    well at any rate i followed ur advice and updated from BS0Y to CS0T i'll try again and see if this fixed my problem
  5. anthojoe

    CodeGuys Mirror for all of you in need

    just to clarify your last post: csot for the 1653 and not the 1633s? i installed the update already for the 1633s, not the 1653
  6. anthojoe

    Help with this error message please

    I would wait for rpc1 to come back roger that, any idea why it's down? typical? Ok, after locating the CodeGuys mirror site, I downloaded and installed, the correct firmware update. Installation went without a hitch. I tried to reburn the exact same image file as before. No error message whatsoever. One thing I noticed though, as the completion percentage began to rise, the read/write lights on my burner were dormant. Upon completion, I removed the dvd-r, turned it over, and I could tell that nothing had actually been burnt. According to ImgBurn, the process was completed sucessfully. Any ideas here? Why would the program believe everything went fine, but it never actually wrote anything to the disk?
  7. anthojoe

    CodeGuys Mirror for all of you in need

    After searching forever, I found this link: http://codeworks.cdfreaks.com/cgmirror It's a mirror site with full download access. W00t.
  8. anthojoe

    Help with this error message please

    I would wait for rpc1 to come back roger that, any idea why it's down? typical?
  9. anthojoe

    Help with this error message please

    My apologies man. I didn't mean for it to come off sounding rude. As per request, here is the log of the latest instance: I 00:24:19 Operation Started! I 00:24:19 Building Image Tree... I 00:24:19 Checking Directory Depth... I 00:24:19 Calculating Totals... I 00:24:19 Preparing Image... I 00:24:19 Checking Path Length... I 00:24:19 Image Size: 2,622,717,952 bytes I 00:24:19 Image Sectors: 1,280,624 I 00:24:19 Operation Successfully Completed! - Duration: 00:00:00 I 00:24:35 Operation Started! I 00:24:35 Building Image Tree... I 00:24:35 Checking Directory Depth... I 00:24:35 Calculating Totals... I 00:24:35 Preparing Image... I 00:24:36 Checking Path Length... I 00:24:36 Image Size: 2,622,717,952 bytes I 00:24:36 Image Sectors: 1,280,624 I 00:24:37 Operation Successfully Completed! - Duration: 00:00:01 I 00:24:37 Operation Started! I 00:24:37 Image Contents: 7 Files, 2 Folders I 00:24:37 Image Sectors: 1,280,624 I 00:24:37 Image Size: 2,622,717,952 bytes I 00:24:37 Image Single Layer Profile: DVD-R/RW (Media Capacity: 2,298,496) I 00:24:37 Image Volume Identifier: AMERICANGANSTER I 00:24:37 Image Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 00:24:37 Image Implementation Identifier: ImgBurn I 00:24:37 Image File System(s): ISO9660, UDF (1.02) I 00:24:37 Destination File: C:\Documents and Settings\JA\Desktop\Movies\American Gangster\American.Gangster.DVDSCR.CUSTOM.NL.TWILIGHTNZB\VIDEO_TS\americanganster.iso I 00:24:37 Destination Free Space: 9,923,764,224 bytes (9,691,176 KB) (9,464 MB) (9 GB) I 00:24:37 Destination File System: NTFS I 00:24:37 File Splitting: Auto W 00:24:50 Destination File renamed to: shootemup.iso I 00:24:50 Writing Image... I 00:26:17 Abort Request Acknowledged E 00:26:17 Operation Aborted! - Duration: 00:01:39 E 00:26:17 Average Write Rate: 8,473 KB/s (6.1x) - Maximum Write Rate: 19,088 KB/s (13.8x) I 00:26:33 Operation Started! I 00:26:33 Building Image Tree... I 00:26:33 Checking Directory Depth... I 00:26:33 Calculating Totals... I 00:26:33 Preparing Image... I 00:26:33 Checking Path Length... I 00:26:33 Image Size: 2,622,717,952 bytes I 00:26:33 Image Sectors: 1,280,624 I 00:26:35 Operation Successfully Completed! - Duration: 00:00:02 I 00:26:35 Operation Started! I 00:26:35 Source File: -==/\/[bUILD IMAGE]\/\==- I 00:26:35 Source File Sectors: 1,280,624 (MODE1/2048) I 00:26:35 Source File Size: 2,622,717,952 bytes I 00:26:35 Source File Volume Identifier: AMERICANGANSTER I 00:26:35 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 00:26:35 Source File Implementation Identifier: ImgBurn I 00:26:35 Source File File System(s): ISO9660, UDF (1.02) I 00:26:35 Destination Device: [0:0:0] LITE-ON DVDRW SOHW-1633S BGS4 (D:) (ATA) I 00:26:35 Destination Media Type: DVD-R (Disc ID: ProdiscF02) (Speeds: 1x, 2x, 4x) I 00:26:35 Destination Media Sectors: 2,294,041 I 00:26:35 Write Mode: DVD I 00:26:35 Write Type: DAO I 00:26:35 Write Speed: 4x I 00:26:35 Link Size: Auto I 00:26:35 Test Mode: No I 00:26:35 BURN-Proof: Enabled E 00:26:48 Failed to Reserve Track! - No More Track Reservations Allowed E 00:26:50 Operation Failed! - Duration: 00:00:14 I 00:26:50 Average Write Rate: N/A - Maximum Write Rate: N/A I 00:26:52 Close Request Acknowledged I 00:26:52 Closing Down... I 00:26:53 Shutting down SPTI... I 00:26:53 ImgBurn closed! Thanks everyone for your help. And im not sure if this represents one attempt, 2 attemps, not sure?
  10. anthojoe

    Help with this error message please

    Yeah I noticed that when trying to get to their site. Are there any other 3rd party sites offering the firmware upgrade that I will need? (and yes, I have a Gateway) I was reading some other forums, and another guy was unable to upgrade the firmware with the link posted above, http://www.liteonit.com/DOWNLOADS/ODD/SOHW...re/DR16BS0Y.zip, all references pointed towards the CodeGuys site for the correct firmware upgrade.
  11. anthojoe

    Help with this error message please

    alright thank you digi for your help. i'll post a screenshot of the log when I get home, and update the firmware as well.
  12. anthojoe

    Help with this error message please

    Can you just look at this error message? I am at work and don't have access to any log that you mentioned.
  13. I am receiving this error message. I am following the guide step by step for burning a dvd image file (video). This error message occurs each time, regardless of the image I am attempting to burn. Below is a screenshot. Your input is greatly appreciated. http://photos-a.ak.facebook.com/photos-ak-...606924_1122.jpg Can't use the code to insert a screen shot, if you can follow that link please do so. Thanks.
×

Important Information

By using this site, you agree to our Terms of Use.