Jump to content
Sign in to follow this  
ShadowFire09

Problem burning an Xbox 360 game

Recommended Posts

Hey, I'm trying to burn UFC for my 360 and I'm using Verbatim 2.4x DVD+R DL discs. Here's my log:

 

I 14:21:34 ImgBurn Version 2.4.4.0 started!

I 14:21:34 Microsoft Windows Vista Home Basic x64 Edition (6.0, Build 6001 : Service Pack 1)

I 14:21:34 Total Physical Memory: 2,095,560 KB - Available: 865,716 KB

I 14:21:34 Initialising SPTI...

I 14:21:34 Searching for SCSI / ATAPI devices...

I 14:24:03 Found 1 DVD-ROM and 1 DVD

Share this post


Link to post
Share on other sites
I 14:39:17 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.03 (D:) (ATA)

I 14:39:17 Destination Media Type: DVD+R (Speeds: 2.4x)

I 14:39:17 Destination Media Sectors: 16,384,000

Update your burner's firmware (remove any disc and close the tray before updating then reboot the computer after it's finished) and try burning again.

Share this post


Link to post
Share on other sites

The drive thinks there's no disc inside. Does it recognize burned discs?

Share this post


Link to post
Share on other sites

Hm. Well actually I just switched discs and put in a different blank disc. Now it's stuck on Device Not Ready (Logical Unit is in process of becoming ready) and it's been like this for a few minutes already. Also I checked with a burned DVD my friend gave me and it works just fine.

 

Oh and yes indeed I did restart.

 

EDIT: Well after another try of reloading the disc, it seems as though it's working now. Hopefully it'll actually burn correctly. Thanks for the help.

 

EDIT again: Well scratch that I got the same error as last time.

 

I 15:23:24 ImgBurn Version 2.4.4.0 started!

I 15:23:24 Microsoft Windows Vista Home Basic x64 Edition (6.0, Build 6001 : Service Pack 1)

I 15:23:24 Total Physical Memory: 2,095,560 KB - Available: 295,288 KB

I 15:23:24 Initialising SPTI...

I 15:23:24 Searching for SCSI / ATAPI devices...

I 15:23:24 Found 1 DVD-ROM and 1 DVD

Edited by ShadowFire09

Share this post


Link to post
Share on other sites
I 15:24:30 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.06 (D:) (ATA)

I 15:24:30 Destination Media Type: DVD+RW (Disc ID: MKM-001-00) (Speeds: 2.4x)

I 15:24:30 Destination Media Sectors: 16,384,000

Your burner is crazy. Did the firmware update go all the way to 100%? Anyway I think you should get a new burner as this one isn't reliable anymore.

Share this post


Link to post
Share on other sites

D: mannnn. Well I'll try to update firmware again when I get back from work. I realllllly hope this works cause I don't wanna spend money on a new burner.

Share this post


Link to post
Share on other sites

Sounds as the laser has problems to read the discs. Perhaps try to clean the laser head with some alcohol.

Share this post


Link to post
Share on other sites

They're very cheap these days and your burner isn't correctly recognizing the disc (see the parts I've highlighted above they're all wrong).

Share this post


Link to post
Share on other sites

Pioneer burners are very good for burning dual-layer media :)

Share this post


Link to post
Share on other sites

There could be compatibility issues between your computer and the USB external enclosure (search this board for "semaphore timeout" to see a few examples).

 

Besides, an internal burner is a lot cheaper and you can replace the one you currently have :thumbup:

Share this post


Link to post
Share on other sites

I'm kinda scared to do work on my computer. I have slots for 4 drives though so maybe I should... Do you know a place with a tutorial or something on how to connect drives?

Share this post


Link to post
Share on other sites
I'm kinda scared to do work on my computer. I have slots for 4 drives though so maybe I should... Do you know a place with a tutorial or something on how to connect drives?

 

 

If you need any additional help just PM me any time and will get back to you as soon as i can, videos and tutorials arn't always the best of guides and i will happily help.

Regaurds

 

Matt

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.