Jump to content

Failed to set L0 Data Zone Capacity!


AlienX69
 Share

Recommended Posts

Hello to all, especially LUK .... ;-)

 

Hope all is well with everyone !!

 

Well I'm a little stumped ..... burned a few DL (Verb's of course), first time getting this error.

 

Or am I just having a major brain fart !!

 

 

I 15:25:41 ImgBurn Version 2.4.2.0 started!

I 15:25:41 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 15:25:41 Total Physical Memory: 2,096,432 KB - Available: 1,573,400 KB

I 15:25:41 Initialising SPTI...

I 15:25:41 Searching for SCSI / ATAPI devices...

I 15:25:41 Found 2 DVD-ROMs and 1 DVD

Link to comment
Share on other sites

I 15:25:41 ImgBurn Version 2.4.2.0 started!

I 15:26:10 Destination Device: [2:1:0] PIONEER DVD-RW DVR-115D 1.18 (E:) (ATA)

I 15:26:10 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 15:26:10 Write Speed: 4x

Update ImgBurn. Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). If that still doesn't help, try a lens cleaning disc on that burner.

Link to comment
Share on other sites

Guess it was the firmware, kinda odd though as this was the last disk on the spindle of 20. But I have been swapping drives between to puters ......

 

Anyhow its now currently burning OK !! .... THX

 

One last ?

 

Here are two different burners/puters, noticed a differences:

 

I 17:48:34 Destination Device: [0:1:0] _NEC DVD_RW ND-3550A 1.Y6 (D:) (ATA)

I 17:48:34 Book Type Setting: DVD-ROM

 

other:

 

I 18:19:00 Destination Device: [2:1:0] PIONEER DVD-RW DVR-115D 1.22 (E:) (ATA)

I 18:19:00 Advanced Settings - Optimal Writing Speed: No

 

 

One has book type, the other Advanced Settings ? ? Plus what tab is that setting on ?

 

PS: Cynthia THX for the tip on 6X

Link to comment
Share on other sites

Optimal Writing Speed:

 

Main Menu -> Drive -> Change Advanced Settings

 

This one is only valid for 116/216 and later models. A pure joke function if you ask me.

 

Pioneers should book type +R DL media by default. For +R media you need to fix the firmware with MediaCodeSpeedEdit.

Link to comment
Share on other sites

Pioneers should book type +R DL media by default. For +R media you need to fix the firmware with MediaCodeSpeedEdit.

 

I always use TY -R for single layer (mostly what I burn), so I guess not an issue for me, mostly use my NEC for burning ... but every once in a while I make some DL burns with the DVR-115D. Not familar with MediaCodeSpeedEdit, guess I need to look that up ... THX Cynthia.

 

Hi Mr. Spinner .... hope things are well with you and the family .... I assume you been getting my INFORMATIVE emails .... :lol:

 

I drop by every once in a while ... have to since I'm using the GREATEST burning tool (ImgBurn) on the PLANET .... keep up the great work LUK .... I'll be donating once I find a JOB !!!!

Edited by AlienX69
Link to comment
Share on other sites

Wow my brain already hurts from reading about MediaCodeSpeedEdit ... looks very KEWL though. I guess it turns me into a FIRMWARE creator :lol:

 

Cynthia you know of a Guide anywhere that give instruction with pic's ? I read the written description here

 

I don't want to attempt before getting some tips or a Guide as I mentioned.

 

As you saw in previous posts I have two burners:

 

NEC DVD_RW ND-3550A 1.Y6

PIONEER DVD-RW DVR-115D 1.22

 

Plus a third I have not mentioned it sits idle (not hooked up) .... Plextor PX-800A

 

BTW: I'm pretty happy with burning at 8X for the TYG02's .... Chewy has me fixated on that ... :lol:

 

 

Probably making a mountain out of a mole hill .... :lol:

Edited by AlienX69
Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.